linux/drivers/gpu/drm/msm, branch v5.14

drm/msm/dp: Initialize dp->aux->drm_dev before registration

2021-07-27T15:14:58Z

Avoids the following WARN: [ 3.009556] ------------[ cut here ]------------ [ 3.014306] WARNING: CPU: 7 PID: 109 at drivers/gpu/drm/drm_dp_helper.c:1796 drm_dp_aux_register+0xa4/0xac [ 3.024209] Modules linked in: [ 3.027351] CPU: 7 PID: 109 Comm: kworker/7:8 Not tainted 5.10.47 #69 [ 3.033958] Hardware name: Google Lazor (rev1 - 2) (DT) [ 3.039323] Workqueue: events deferred_probe_work_func [ 3.044596] pstate: 60c00009 (nZCv daif +PAN +UAO -TCO BTYPE=--) [ 3.050761] pc : drm_dp_aux_register+0xa4/0xac [ 3.055329] lr : dp_aux_register+0x40/0x88 [ 3.059538] sp : ffffffc010ad3920 [ 3.062948] x29: ffffffc010ad3920 x28: ffffffa64196ac70 [ 3.067239] mmc1: Command Queue Engine enabled [ 3.068406] x27: ffffffa64196ac68 x26: 0000000000000001 [ 3.068407] x25: 0000000000000002 x24: 0000000000000060 [ 3.068409] x23: ffffffa642ab3400 x22: ffffffe126c10e5b [ 3.068410] x21: ffffffa641dc3188 x20: ffffffa641963c10 [ 3.068412] x19: ffffffa642aba910 x18: 00000000ffff0a00 [ 3.068414] x17: 000000476f8e002a x16: 00000000000000b8 [ 3.073008] mmc1: new HS400 Enhanced strobe MMC card at address 0001 [ 3.078448] x15: ffffffffffffffff x14: ffffffffffffffff [ 3.078450] x13: 0000000000000030 x12: 0000000000000030 [ 3.078452] x11: 0101010101010101 x10: ffffffe12647a914 [ 3.078453] x9 : ffffffe12647a8cc x8 : 0000000000000000 [ 3.084452] mmcblk1: mmc1:0001 DA4032 29.1 GiB [ 3.089372] [ 3.089372] x7 : 6c6064717372fefe x6 : ffffffa642b11494 [ 3.089374] x5 : 0000000000000000 x4 : 6d006c657869ffff [ 3.089375] x3 : 000000006c657869 x2 : 000000000000000c [ 3.089376] x1 : ffffffe126c3ae3c x0 : ffffffa642aba910 [ 3.089381] Call trace: [ 3.094931] mmcblk1boot0: mmc1:0001 DA4032 partition 1 4.00 MiB [ 3.100291] drm_dp_aux_register+0xa4/0xac [ 3.100292] dp_aux_register+0x40/0x88 [ 3.100294] dp_display_bind+0x64/0xcc [ 3.100295] component_bind_all+0xdc/0x210 [ 3.100298] msm_drm_bind+0x1e8/0x5d4 [ 3.100301] try_to_bring_up_master+0x168/0x1b0 [ 3.105861] mmcblk1boot1: mmc1:0001 DA4032 partition 2 4.00 MiB [ 3.112282] __component_add+0xa0/0x158 [ 3.112283] component_add+0x1c/0x28 [ 3.112284] dp_display_probe+0x33c/0x380 [ 3.112286] platform_drv_probe+0x9c/0xbc [ 3.112287] really_probe+0x140/0x35c [ 3.112289] driver_probe_device+0x84/0xc0 [ 3.112292] __device_attach_driver+0x94/0xb0 [ 3.117967] mmcblk1rpmb: mmc1:0001 DA4032 partition 3 16.0 MiB, chardev (239:0) [ 3.123201] bus_for_each_drv+0x8c/0xd8 [ 3.123202] __device_attach+0xc4/0x150 [ 3.123204] device_initial_probe+0x1c/0x28 [ 3.123205] bus_probe_device+0x3c/0x9c [ 3.123206] deferred_probe_work_func+0x90/0xcc [ 3.123211] process_one_work+0x218/0x3ec [ 3.131976] mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 3.134123] worker_thread+0x288/0x3e8 [ 3.134124] kthread+0x148/0x1b0 [ 3.134127] ret_from_fork+0x10/0x30 [ 3.134128] ---[ end trace cfb9fce3f70f824d ]--- Signed-off-by: Sean Paul Reviewed-by: Abhinav Kumar Link: https://lore.kernel.org/r/20210714152910.55093-1-sean@poorly.run Signed-off-by: Rob Clark

drm/msm/dp: signal audio plugged change at dp_pm_resume

2021-07-27T15:14:57Z

There is a scenario that dp cable is unplugged from DUT during system suspended will cause audio option state does not match real connection state. Fix this problem by Signaling audio plugged change with realtime connection status at dp_pm_resume() so that audio option will be in correct state after system resumed. Changes in V2: -- correct Fixes tag commit id. Fixes: f591dbb5fb8c ("drm/msm/dp: power off DP phy at suspend") Signed-off-by: Kuogee Hsieh Reviewed-by: Stephen Boyd Link: https://lore.kernel.org/r/1627059339-12142-1-git-send-email-khsieh@codeaurora.org Signed-off-by: Rob Clark

drm/msm/dp: Initialize the INTF_CONFIG register

2021-07-27T15:14:57Z

Some bootloaders set the widebus enable bit in the INTF_CONFIG register, but configuration of widebus isn't yet supported ensure that the register has a known value, with widebus disabled. Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support") Signed-off-by: Bjorn Andersson Reviewed-by: Stephen Boyd Link: https://lore.kernel.org/r/20210722024434.3313167-1-bjorn.andersson@linaro.org Signed-off-by: Rob Clark

drm/msm/dp: use dp_ctrl_off_link_stream during PHY compliance test run

2021-07-27T15:14:56Z

DP cable should always connect to DPU during the entire PHY compliance testing run. Since DP PHY compliance test is executed at irq_hpd event context, dp_ctrl_off_link_stream() should be used instead of dp_ctrl_off(). dp_ctrl_off() is used for unplug event which is triggered when DP cable is dis connected. Changes in V2: -- add fixes statement Fixes: f21c8a276c2d ("drm/msm/dp: handle irq_hpd with sink_count = 0 correctly") Signed-off-by: Kuogee Hsieh Reviewed-by: Stephen Boyd Link: https://lore.kernel.org/r/1626191647-13901-2-git-send-email-khsieh@codeaurora.org Signed-off-by: Rob Clark

drm/msm: Fix display fault handling

2021-07-27T15:14:55Z

It turns out that when the display is enabled by the bootloader, we can get some transient iommu faults from the display. Which doesn't go over too well when we install a fault handler that is gpu specific. To avoid this, defer installing the fault handler until we get around to setting up per-process pgtables (which is adreno_smmu specific). The arm-smmu fallback error reporting is sufficient for reporting display related faults (and in fact was all we had prior to f8f934c180f629bb927a04fd90d) Reported-by: Dmitry Baryshkov Reported-by: Yassine Oudjana Fixes: 2a574cc05d38 ("drm/msm: Improve the a6xx page fault handler") Signed-off-by: Rob Clark Tested-by: John Stultz Tested-by: Yassine Oudjana Reviewed-by: Bjorn Andersson Link: https://lore.kernel.org/r/20210707180113.840741-1-robdclark@gmail.com Signed-off-by: Rob Clark

drm/msm/dpu: Fix sm8250_mdp register length

2021-07-27T15:14:55Z

The downstream dts lists this value as 0x494, and not 0x45c. Fixes: af776a3e1c30 ("drm/msm/dpu: add SM8250 to hw catalog") Signed-off-by: Robert Foss Reviewed-by: Dmitry Baryshkov Reviewed-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/r/20210628085033.9905-1-robert.foss@linaro.org Signed-off-by: Rob Clark

drm/msm: Fix fall-through warning in msm_gem_new_impl()

2021-07-13T02:32:25Z

Fix the following fall-through warning: drivers/gpu/drm/msm/msm_gem.c: In function 'msm_gem_new_impl': drivers/gpu/drm/msm/msm_gem.c:1170:6: warning: this statement may fall through [-Wimplicit-fallthrough=] 1170 | if (priv->has_cached_coherent) | ^ drivers/gpu/drm/msm/msm_gem.c:1173:2: note: here 1173 | default: | ^~~~~~~ by replacing the /* fallthrough */ comment with fallthrough; Reported-by: Stephen Rothwell Signed-off-by: Gustavo A. R. Silva

Merge tag 'drm-msm-next-2021-06-23b' of https://gitlab.freedesktop.org/drm/msm into drm-next

2021-06-23T21:21:16Z

* devcoredump support for display errors * dpu: irq cleanup/refactor * dpu: dt bindings conversion to yaml * dsi: dt bindings conversion to yaml * mdp5: alpha/blend_mode/zpos support * a6xx: cached coherent buffer support * a660 support * gpu iova fault improvements: - info about which block triggered the fault, etc - generation of gpu devcoredump on fault * assortment of other cleanups and fixes Signed-off-by: Dave Airlie From: Rob Clark Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGs4=qsGBBbyn-4JWqW4-YUSTKh67X3DsPQ=T2D9aXKqNA@mail.gmail.com

Revert "drm/msm/mdp5: provide dynamic bandwidth management"

2021-06-23T21:06:20Z

This reverts commit c1d12c19efd91b9cda5472bc4ec48854e67c24a8. Breaks armv7 build ERROR: modpost: "__aeabi_ldivmod" [drivers/gpu/drm/msm/msm.ko] undefined! Signed-off-by: Rob Clark

drm/msm/mdp5: provide dynamic bandwidth management

2021-06-23T14:33:56Z

Instead of using static bandwidth setup, manage bandwidth dynamically, depending on the amount of allocated planes, their format and resolution. Co-developed-with: James Willcox Signed-off-by: Dmitry Baryshkov Reported-by: kernel test robot Link: https://lore.kernel.org/r/20210525131316.3117809-8-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark