linux/drivers/gpu/host1x, branch v5.6

Merge tag 'drm/tegra/for-5.6-rc1-fixes' of git://anongit.freedesktop.org/tegra/linux into drm-next

2020-02-07T02:22:30Z

drm/tegra: Fixes for v5.6-rc1 These are a couple of quick fixes for regressions that were found during the first two weeks of the merge window. Signed-off-by: Dave Airlie From: Thierry Reding Link: https://patchwork.freedesktop.org/patch/msgid/20200206172753.2185390-1-thierry.reding@gmail.com

gpu: host1x: Set DMA direction only for DMA-mapped buffer objects

2020-02-06T17:23:12Z

The DMA direction is only used by the DMA API, so there is no use in setting it when a buffer object isn't mapped with the DMA API. Signed-off-by: Thierry Reding Tested-by: Dmitry Osipenko Reviewed-by: Dmitry Osipenko

drm/tegra: Reuse IOVA mapping where possible

2020-02-06T17:21:55Z

This partially reverts the DMA API support that was recently merged because it was causing performance regressions on older Tegra devices. Unfortunately, the cache maintenance performed by dma_map_sg() and dma_unmap_sg() causes performance to drop by a factor of 10. The right solution for this would be to cache mappings for buffers per consumer device, but that's a bit involved. Instead, we simply revert to the old behaviour of sharing IOVA mappings when we know that devices can do so (i.e. they share the same IOMMU domain). Cc: # v5.5 Reported-by: Dmitry Osipenko Signed-off-by: Thierry Reding Tested-by: Dmitry Osipenko Reviewed-by: Dmitry Osipenko

Merge tag 'drm/tegra/for-5.6-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next

2020-01-15T06:21:28Z

drm/tegra: Changes for v5.6-rc1 This contains a small set of mostly fixes and some minor improvements. Signed-off-by: Dave Airlie From: Thierry Reding Link: https://patchwork.freedesktop.org/patch/msgid/20200111004835.2412858-1-thierry.reding@gmail.com

gpu: host1x: Remove dev_err() on platform_get_irq() failure

2020-01-10T16:05:12Z

platform_get_irq() will call dev_err() itself on failure, so there is no need for the driver to also do this. This is detected by coccinelle. Signed-off-by: YueHaibing Signed-off-by: Thierry Reding

drm/tegra: Do not implement runtime PM

2020-01-10T15:37:43Z

The Tegra DRM driver heavily relies on the implementations for runtime suspend/resume to be called at specific times. Unfortunately, there are some cases where that doesn't work. One example is if the user disables runtime PM for a given subdevice. Another example is that the PM core acquires a reference to runtime PM during system sleep, effectively preventing devices from going into low power modes. This is intentional to avoid nasty race conditions, but it also causes system sleep to not function properly on all Tegra systems. Fix this by not implementing runtime PM at all. Instead, a minimal, reference-counted suspend/resume infrastructure is added to the host1x bus. This has the benefit that it can be used regardless of the system power state (or any transitions we might be in), or whether or not the user allows runtime PM. Atomic modesetting guarantees that these functions will end up being called at the right point in time, so the pitfalls for the more generic runtime PM do not apply here. Signed-off-by: Thierry Reding

gpu: host1x: Rename "parent" to "host"

2020-01-10T15:37:38Z

Rename the host1x clients' parent to "host" because that more closely describes what it is. The parent can be confused with the parent device in terms of the device hierarchy. Subsequent patches will add a new member that refers to the parent in that hierarchy. Signed-off-by: Thierry Reding

Merge tag 'drm-misc-next-2019-12-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

2019-12-17T12:57:54Z

drm-misc-next for v5.6: UAPI Changes: - Add support for DMA-BUF HEAPS. Cross-subsystem Changes: - mipi dsi definition updates, pulled into drm-intel as well. - Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim. - Remove support for dma-buf kmap/kunmap. - Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well. Core Changes: - Small cleanups to ttm. - Fix SCDC definition. - Assorted cleanups to core. - Add todo to remove load/unload hooks, and use generic fbdev emulation. - Assorted documentation updates. - Use blocking ww lock in ttm fault handler. - Remove drm_fb_helper_fbdev_setup/teardown. - Warning fixes with W=1 for atomic. - Use drm_debug_enabled() instead of drm_debug flag testing in various drivers. - Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted) - Various kconfig indentation fixes in core and drivers. - Fix freeing transactions in dp-mst correctly. - Sean Paul is steping down as core maintainer. :-( - Add lockdep annotations for atomic locks vs dma-resv. - Prevent use-after-free for a bad job in drm_scheduler. - Fill out all block sizes in the P01x and P210 definitions. - Avoid division by zero in drm/rect, and fix bounds. - Add drm/rect selftests. - Add aspect ratio and alternate clocks for HDMI 4k modes. - Add todo for drm_framebuffer_funcs and fb_create cleanup. - Drop DRM_AUTH for prime import/export ioctls. - Clear DP-MST payload id tables downstream when initializating. - Fix for DSC throughput definition. - Add extra FEC definitions. - Fix fake offset in drm_gem_object_funs.mmap. - Stop using encoder->bridge in core directly - Handle bridge chaining slightly better. - Add backlight support to drm/panel, and use it in many panel drivers. - Increase max number of y420 modes from 128 to 256, as preparation to add the new modes. Driver Changes: - Small fixes all over. - Fix documentation in vkms. - Fix mmap_sem vs dma_resv in nouveau. - Small cleanup in komeda. - Add page flip support in gma500 for psb/cdv. - Add ddc symlink in the connector sysfs directory for many drivers. - Add support for analogic an6345, and fix small bugs in it. - Add atomic modesetting support to ast. - Fix radeon fault handler VMA race. - Switch udl to use generic shmem helpers. - Unconditional vblank handling for mcde. - Miscellaneous fixes to mcde. - Tweak debug output from komeda using debugfs. - Add gamma and color transform support to komeda for DOU-IPS. - Add support for sony acx424AKP panel. - Various small cleanups to gma500. - Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation. - Add support for Logic PD Type 28 panel. - Use drm_panel_* wrapper functions in exynos/tegra/msm. - Add devicetree bindings for generic DSI panels. - Don't include drm_pci.h directly in many drivers. - Add support for begin/end_cpu_access in udmabuf. - Stop using drm_get_pci_dev in gma500 and mga200. - Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access. - Add devfreq thermal support to panfrost. - Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager. - meson: Add support for OSD1 plane AFBC commit. - Stop displaying garbage when toggling ast primary plane on/off. - More cleanups and fixes to UDL. - Add D32 suport to komeda. - Remove globle copy of drm_dev in gma500. - Add support for Boe Himax8279d MIPI-DSI LCD panel. - Add support for ingenic JZ4770 panel. - Small null pointer deference fix in ingenic. - Remove support for the special tfp420 driver, as there is a generic way to do it. Signed-off-by: Daniel Vetter From: Maarten Lankhorst Link: https://patchwork.freedesktop.org/patch/msgid/ba73535a-9334-5302-2e1f-5208bd7390bd@linux.intel.com

drm/tegra: Map cmdbuf once for reloc processing

2019-11-25T21:36:01Z

A few reasons to drop kmap: - For native objects all we do is look at obj->vaddr anyway, so might as well not call functions for every page. - Reloc-processing on dma-buf is ... questionable. - Plus most dma-buf that bother kernel cpu mmaps give you at least vmap, much less kmaps. And all the ones relevant for arm-soc are again doing a obj->vaddr game anyway, there's no real kmap going on on arm it seems. Plus this seems to be the only real in-tree user of dma_buf_kmap, and I'd like to get rid of that. Reviewed-by: Thierry Reding Tested-by: Thierry Reding Acked-by: Sumit Semwal Signed-off-by: Daniel Vetter Cc: Thierry Reding Cc: linux-tegra@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20191118103536.17675-2-daniel.vetter@ffwll.ch

gpu: host1x: Unconditionally select IOMMU_IOVA

2019-11-01T09:49:17Z

Currently configurations can be generated where IOMMU_SUPPORT is disabled but IOMMU_IOVA is built as a module and HOST1X as built-in. In such a case, the symbols guarded by IOMMU_IOVA will not be available when linking the host1x driver and cause a linking failure. Simplify this by unconditionally selecting IOMMU_IOVA, which makes sure that it will be forced to =y if HOST1X=y. Technically we can now get IOMMU_IOVA code built-in even if we don't use it (host1x only uses it when IOMMU_SUPPORT is also enabled), but such configuration are of a mostly academic nature. In all practical configurations we want IOMMU support anyway. Signed-off-by: Thierry Reding