linux/drivers/gpu/ipu-v3, branch v4.19

Merge tag 'drm-next-2018-08-15' of git://anongit.freedesktop.org/drm/drm

2018-08-16T00:39:07Z

Pull drm updates from Dave Airlie: "This is the main drm pull request for 4.19. Rob has some new hardware support for new qualcomm hw that I'll send along separately. This has the display part of it, the remaining pull is for the acceleration engine. This also contains a wound-wait/wait-die mutex rework, Peter has acked it for merging via my tree. Otherwise mostly the usual level of activity. Summary: core: - Wound-wait/wait-die mutex rework - Add writeback connector type - Add "content type" property for HDMI - Move GEM bo to drm_framebuffer - Initial gpu scheduler documentation - GPU scheduler fixes for dying processes - Console deferred fbcon takeover support - Displayport support for CEC tunneling over AUX panel: - otm8009a panel driver fixes - Innolux TV123WAM and G070Y2-L01 panel driver - Ilitek ILI9881c panel driver - Rocktech RK070ER9427 LCD - EDT ETM0700G0EDH6 and EDT ETM0700G0BDH6 - DLC DLC0700YZG-1 - BOE HV070WSA-100 - newhaven, nhd-4.3-480272ef-atxl LCD - DataImage SCF0700C48GGU18 - Sharp LQ035Q7DB03 - p079zca: Refactor to support multiple panels tinydrm: - ILI9341 display panel New driver: - vkms - virtual kms driver to testing. i915: - Icelake: Display enablement DSI support IRQ support Powerwell support - GPU reset fixes and improvements - Full ppgtt support refactoring - PSR fixes and improvements - Execlist improvments - GuC related fixes amdgpu: - Initial amdgpu documentation - JPEG engine support on VCN - CIK uses powerplay by default - Move to using core PCIE functionality for gens/lanes - DC/Powerplay interface rework - Stutter mode support for RV - Vega12 Powerplay updates - GFXOFF fixes - GPUVM fault debugging - Vega12 GFXOFF - DC improvements - DC i2c/aux changes - UVD 7.2 fixes - Powerplay fixes for Polaris12, CZ/ST - command submission bo_list fixes amdkfd: - Raven support - Power management fixes udl: - Cleanups and fixes nouveau: - misc fixes and cleanups. msm: - DPU1 support display controller in sdm845 - GPU coredump support. vmwgfx: - Atomic modesetting validation fixes - Support for multisample surfaces armada: - Atomic modesetting support completed. exynos: - IPPv2 fixes - Move g2d to component framework - Suspend/resume support cleanups - Driver cleanups imx: - CSI configuration improvements - Driver cleanups - Use atomic suspend/resume helpers - ipu-v3 V4L2 XRGB32/XBGR32 support pl111: - Add Nomadik LCDC variant v3d: - GPU scheduler jobs management sun4i: - R40 display engine support - TCON TOP driver mediatek: - MT2712 SoC support rockchip: - vop fixes omapdrm: - Workaround for DRA7 errata i932 - Fix mm_list locking mali-dp: - Writeback implementation PM improvements - Internal error reporting debugfs tilcdc: - Single fix for deferred probing hdlcd: - Teardown fixes tda998x: - Converted to a bridge driver. etnaviv: - Misc fixes" * tag 'drm-next-2018-08-15' of git://anongit.freedesktop.org/drm/drm: (1506 commits) drm/amdgpu/sriov: give 8s for recover vram under RUNTIME drm/scheduler: fix param documentation drm/i2c: tda998x: correct PLL divider calculation drm/i2c: tda998x: get rid of private fill_modes function drm/i2c: tda998x: move mode_valid() to bridge drm/i2c: tda998x: register bridge outside of component helper drm/i2c: tda998x: cleanup from previous changes drm/i2c: tda998x: allocate tda998x_priv inside tda998x_create() drm/i2c: tda998x: convert to bridge driver drm/scheduler: fix timeout worker setup for out of order job completions drm/amd/display: display connected to dp-1 does not light up drm/amd/display: update clk for various HDMI color depths drm/amd/display: program display clock on cache match drm/amd/display: Add NULL check for enabling dp ss drm/amd/display: add vbios table check for enabling dp ss drm/amd/display: Don't share clk source between DP and HDMI drm/amd/display: Fix DP HBR2 Eye Diagram Pattern on Carrizo drm/amd/display: Use calculated disp_clk_khz value for dce110 drm/amd/display: Implement custom degamma lut on dcn drm/amd/display: Destroy aux_engines only once ...

Merge branches 'pm-core', 'pm-domains', 'pm-sleep', 'acpi-pm' and 'pm-cpuidle'

2018-08-14T07:48:10Z

Merge changes in the PM core, system-wide PM infrastructure, generic power domains (genpd) framework, ACPI PM infrastructure and cpuidle for 4.19. * pm-core: driver core: Add flag to autoremove device link on supplier unbind driver core: Rename flag AUTOREMOVE to AUTOREMOVE_CONSUMER * pm-domains: PM / Domains: Introduce dev_pm_domain_attach_by_name() PM / Domains: Introduce option to attach a device by name to genpd PM / Domains: dt: Add a power-domain-names property * pm-sleep: PM / reboot: Eliminate race between reboot and suspend PM / hibernate: Mark expected switch fall-through x86/power/hibernate_64: Remove VLA usage PM / hibernate: cast PAGE_SIZE to int when comparing with error code * acpi-pm: ACPI / PM: save NVS memory for ASUS 1025C laptop ACPI / PM: Default to s2idle in all machines supporting LP S0 * pm-cpuidle: ARM: cpuidle: silence error on driver registration failure

Merge tag 'imx-drm-fixes-2018-08-03' of git://git.pengutronix.de/git/pza/linux into drm-next

2018-08-10T01:37:35Z

drm/imx: ipu-v3 plane offset and IPU id fixes - Fix U/V plane offsets for odd vertical offsets. Due to wrong operator order, the y offset was not rounded down properly for vertically chroma subsampled planar formats. - Fix IPU id number for boards that don't have an OF alias for their single IPU in the device tree. This is necessary to support imx-media on i.MX51 and i.MX53 SoCs. Signed-off-by: Dave Airlie From: Philipp Zabel Link: https://patchwork.freedesktop.org/patch/msgid/1533552680.4204.14.camel@pengutronix.de

gpu: ipu-v3: default to id 0 on missing OF alias

2018-08-02T10:09:11Z

This is better than storing -ENODEV in the id number. This fixes SoCs with only one IPU that don't specify an IPU alias in the device tree. Signed-off-by: Philipp Zabel

gpu: ipu-v3: Fix U/V offset macros for planar 4:2:0

2018-08-02T09:47:39Z

The U and V offset macros for planar 4:2:0 (U_OFFSET, V_OFFSET, and UV_OFFSET), are not correct. The height component to the offset was calculated as: (pix->width * y / 4) But this does not produce correct offsets for odd values of y (luma line #). The luma line # must be decimated by two to produce the correct U/V line #, so the correct formula is: (pix->width * (y / 2) / 2) Signed-off-by: Steve Longerbeam Signed-off-by: Philipp Zabel

gpu: ipu-v3: add support for XRGB32 and XBGR32 V4L2 pixel formats

2018-08-02T09:32:40Z

These should be used instead of the ill-defined deprecated RGB32 and BGR32 V4L2 pixel formats. Signed-off-by: Philipp Zabel

gpu: ipu-v3: Allow negative offsets for interlaced scanning

2018-07-16T14:56:37Z

The IPU also supports interlaced buffers that start with the bottom field. To achieve this, the the base address EBA has to be increased by a stride length and the interlace offset ILO has to be set to the negative stride. Signed-off-by: Philipp Zabel Signed-off-by: Steve Longerbeam

gpu: ipu-v3: csi: support RGB565 on parallel bus

2018-07-16T14:56:37Z

The CSI_SENS_CONF_DATA_FMT_RGB565 configuration only works for MIPI CSI-2 sources. On the parallel bus, we need to use bayer (generic) mode instead. To handle this difference, we pass the mbus_type to mbus_code_to_bus_cfg(). Signed-off-by: Jan Luebbe [p.zabel@pengutronix.de - renamed rc to ret for consistency] Signed-off-by: Philipp Zabel

gpu: ipu-v3: csi: pass back mbus_code_to_bus_cfg error codes

2018-07-16T14:56:36Z

mbus_code_to_bus_cfg() can fail on unknown mbus codes; pass back the error to the caller. Signed-off-by: Enrico Scholz Signed-off-by: Jan Luebbe [p.zabel@pengutronix.de - renamed rc to ret for consistency] Signed-off-by: Philipp Zabel

gpu: ipu-csi: add rgb/bgr888 24bit support to mbus_code_to_bus_cfg

2018-07-16T14:56:36Z

The 24bit RGB format configuration is currently missing, we add it now. Signed-off-by: Michael Grzeschik Signed-off-by: Philipp Zabel