linux/drivers/hid, branch v4.5

Merge tag 'asm-generic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

2016-01-21T01:30:20Z

Pull asm-generic updates from Arnd Bergmann: "The asm-generic tree this time contains one series from Nicolas Pitre that makes the optimized do_div() implementation from the ARM architecture available to all architectures. This also adds stricter type checking for callers of do_div, which has uncovered a number of bugs in existing code, and fixes up the ones we have found" * tag 'asm-generic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: ARM: asm/div64.h: adjust to generic codde __div64_32(): make it overridable at compile time __div64_const32(): abstract out the actual 128-bit cross product code do_div(): generic optimization for constant divisor on 32-bit machines div64.h: optimize do_div() for power-of-two constant divisors mtd/sm_ftl.c: fix wrong do_div() usage drm/mgag200/mgag200_mode.c: fix wrong do_div() usage hid-sensor-hub.c: fix wrong do_div() usage ti/fapll: fix wrong do_div() usage ti/clkt_dpll: fix wrong do_div() usage tegra/clk-divider: fix wrong do_div() usage imx/clk-pllv2: fix wrong do_div() usage imx/clk-pllv1: fix wrong do_div() usage nouveau/nvkm/subdev/clk/gk20a.c: fix wrong do_div() usage

Merge tag 'gpio-v4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

2016-01-17T20:32:01Z

Pull GPIO updates from Linus Walleij: "Here is the bulk of GPIO changes for v4.5. Notably there are big refactorings mostly by myself, aimed at getting the gpio_chip into a shape that makes me believe I can proceed to preserve state for a proper userspace ABI (character device) that has already been proposed once, but resulted in the feedback that I need to go back and restructure stuff. So I've been restructuring stuff. On the way I ran into brokenness (return code from the get_value() callback) and had to fix it. Also, refactored generic GPIO to be simpler. Some of that is still waiting to trickle down from the subsystems all over the kernel that provide random gpio_chips, I've touched every single GPIO driver in the kernel now, oh man I didn't know I was responsible for so much... Apart from that we're churning along as usual. I took some effort to test and retest so it should merge nicely and we shook out a couple of bugs in -next. Infrastructural changes: - In struct gpio_chip, rename the .dev node to .parent to better reflect the fact that this is not the GPIO struct device abstraction. We will add that soon so this would be totallt confusing. - It was noted that the driver .get_value() callbacks was sometimes reporting negative -ERR values to the gpiolib core, expecting them to be propagated to consumer gpiod_get_value() and gpio_get_value() calls. This was not happening, so as there was a mess of drivers returning negative errors and some returning "anything else than zero" to indicate that a line was active. As some would have bit 31 set to indicate "line active" it clashed with negative error codes. This is fixed by the largeish series clamping values in all drivers with !!value to [0,1] and then augmenting the code to propagate error codes to consumers. (Includes some ACKed patches in other subsystems.) - Add a void *data pointer to struct gpio_chip. The container_of() design pattern is indeed very nice, but we want to reform the struct gpio_chip to be a non-volative, stateless business, and keep states internal to the gpiolib to be able to hold on to the state when adding a proper userspace ABI (character device) further down the road. To achieve this, drivers need a handle at the internal state that is not dependent on their struct gpio_chip() so we add gpiochip_add_data() and gpiochip_get_data() following the pattern of many other subsystems. All the "use gpiochip data pointer" patches transforms drivers to this scheme. - The Generic GPIO chip header has been merged into the general header, and the custom header for that removed. Instead of having a separate mm_gpio_chip struct for these generic drivers, merge that into struct gpio_chip, simplifying the code and removing the need for separate and confusing includes. Misc improvements: - Stabilize the way GPIOs are looked up from the ACPI legacy specification. - Incremental driver features for PXA, PCA953X, Lantiq (patches from the OpenWRT community), RCAR, Zynq, PL061, 104-idi-48 New drivers: - Add a GPIO chip to the ALSA SoC AC97 driver. - Add a new Broadcom NSP SoC driver (this lands in the pinctrl dir, but the branch is merged here too to account for infrastructural changes). - The sx150x driver now supports the sx1502" * tag 'gpio-v4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (220 commits) gpio: generic: make bgpio_pdata always visible gpiolib: fix chip order in gpio list gpio: mpc8xxx: Do not use gpiochip_get_data() in mpc8xxx_gpio_save_regs() gpio: mm-lantiq: Do not use gpiochip_get_data() in ltq_mm_save_regs() gpio: brcmstb: Allow building driver for BMIPS_GENERIC gpio: brcmstb: Set endian flags for big-endian MIPS gpio: moxart: fix build regression gpio: xilinx: Do not use gpiochip_get_data() in xgpio_save_regs() leds: pca9532: use gpiochip data pointer leds: tca6507: use gpiochip data pointer hid: cp2112: use gpiochip data pointer bcma: gpio: use gpiochip data pointer avr32: gpio: use gpiochip data pointer video: fbdev: via: use gpiochip data pointer gpio: pch: Optimize pch_gpio_get() Revert "pinctrl: lantiq: Implement gpio_chip.to_irq" pinctrl: nsp-gpio: use gpiochip data pointer pinctrl: vt8500-wmt: use gpiochip data pointer pinctrl: exynos5440: use gpiochip data pointer pinctrl: at91-pio4: use gpiochip data pointer ...

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid

2016-01-15T00:20:42Z

Pull HID updates from Jiri Kosina: - appoint Benjamin Tissoires as co-maintainer / designated reviewer - sysfs report_descriptor visibility fix for unclaimed devices, from Andy Lutomirski - suspend/resume fixes for Sony driver from Frank Praznik - IRQ deadlock fix from Ioan-Adrian Ratiu - hid-i2c fixes affecting (at least) Yoga 900 from Mika Westerberg and Srinivas Pandruvada - a lot of new device support (especially, but not limited to, Wacom) and assorted small misc fixes - almost complete G920 support; the only bit that is missing is switching the device to HID mode automatically; Simon Wood and Michal Maly are working on it. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (46 commits) Revert "INPUT: xpad: switch Logitech G920 Wheel into HID mode" HID: sensor-hub: Add quirk for Lenovo Yoga 900 with ITE Chips HID: Add new PID for Microchip Pick16F1454 HID: wacom: Use correct report to query pen ID from INTUOSHT2 devices HID: i2c-hid: Prevent sending reports from racing with device reset HID: use kobj_to_dev() HID: wiimote: use dev_to_wii() HID: add a new helper to_hid_driver() HID: use to_hid_device() HID: move to_hid_device() to hid.h HID: usbhid: use to_usb_device HID: corsair: Convert to use module_hid_driver HID: input: ignore the battery in OKLICK Laser BTmouse HID: wacom: Fix pad button range for CINTIQ_COMPANION_2 HID: wacom: Fix touchring value reporting HID: wacom: Report 'strip2' values in ABS_RY HID: wacom: Limit touchstrip data to 13 bits HID: wacom: bitwise vs logical ORs HID: wacom: Apply lowres quirk to BAMBOO_TOUCH devices HID: enable hid device to suspend/resume asynchronously ...

Merge branches 'for-4.4/upstream-fixes', 'for-4.5/async-suspend', 'for-4.5/container-of-cleanups', 'for-4.5/core', 'for-4.5/i2c-hid', 'for-4.5/logitech', 'for-4.5/multitouch', 'for-4.5/sony', 'for-4.5/upstream' and 'for-4.5/wacom' into for-linus

2016-01-14T15:11:06Z

HID: sensor-hub: Add quirk for Lenovo Yoga 900 with ITE Chips

2016-01-08T09:54:55Z

This needs same quirk as applied to other YOGA sensor hubs. Refer to commit 21589ebda681 ("HID: sensor-hub: Add in quirk for Lenovo Yogas with ITE") Signed-off-by: Srinivas Pandruvada Signed-off-by: Jiri Kosina

HID: Add new PID for Microchip Pick16F1454

2016-01-08T09:34:52Z

There seems to be a new version of the Microchip Pick16F1454 with a different PID (0xf2f7). This device should also be ignored by the HID driver. The PID was observed with the second version of the Yepkit Ykush USB hub. Signed-off-by: Kristian Evensen Signed-off-by: Jiri Kosina

HID: wacom: Use correct report to query pen ID from INTUOSHT2 devices

2016-01-08T09:15:22Z

Unlike other tablets which are compatible with the wacom_intuos_irq handler, INTUOSHT2 devices provide pen ID with report ID 8 instead of 5. To ensure wacom_intuos_schedule_prox_event works as intended for these tablets, we must be sure it uses the correct report ID in this case. Signed-off-by: Jason Gerecke Signed-off-by: Jiri Kosina

hid: cp2112: use gpiochip data pointer

2016-01-06T23:10:21Z

This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: linux-input@vger.kernel.org Acked-by: Jiri Kosina Signed-off-by: Linus Walleij

HID: i2c-hid: Prevent sending reports from racing with device reset

2015-12-30T22:56:31Z

When an i2c-hid device is resumed from system sleep the driver resets the device to be sure it is in known state. The device is expected to issue an interrupt when reset is complete. This reset might take few milliseconds to complete so if the HID driver on top (hid-rmi) starts to set up the device by sending feature reports etc. the device might not issue the reset complete interrupt anymore. Below is what happens to touchpad on Lenovo Yoga 900 during resume from system sleep: [ 24.790951] i2c_hid i2c-SYNA2B29:00: i2c_hid_hwreset [ 24.790973] i2c_hid i2c-SYNA2B29:00: i2c_hid_set_power [ 24.790982] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: cmd=22 00 00 08 [ 24.793011] i2c_hid i2c-SYNA2B29:00: resetting... [ 24.793016] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: cmd=22 00 00 01 Here i2c-hid sends reset command to the touchpad. [ 24.794012] i2c_hid i2c-SYNA2B29:00: input: 06 00 01 00 00 00 [ 24.794051] i2c_hid i2c-SYNA2B29:00: i2c_hid_set_or_send_report [ 24.794059] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: cmd=22 00 3f 03 0f 23 00 04 00 0f 01 Now hid-rmi puts the touchpad to correct mode by sending it a feature report. This makes the touchpad not to issue reset complete interrupt. [ 24.796092] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: waiting... i2c-hid starts to wait for the reset interrupt to trigger which never happens. [ 24.798304] i2c_hid i2c-SYNA2B29:00: i2c_hid_set_or_send_report [ 24.798313] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: cmd=25 00 17 00 09 01 42 00 2e 00 19 19 00 10 cc 06 74 04 0f 19 00 00 00 00 00 Yet another output report from hid-rmi driver. [ 29.795630] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: finished. [ 29.795637] i2c_hid i2c-SYNA2B29:00: failed to reset device. After 5 seconds i2c-hid driver times out. [ 29.795642] i2c_hid i2c-SYNA2B29:00: i2c_hid_set_power [ 29.795649] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: cmd=22 00 01 08 [ 29.797576] dpm_run_callback(): i2c_hid_resume+0x0/0xb0 returns -61 [ 29.797584] PM: Device i2c-SYNA2B29:00 failed to resume: error -61 After this the touchpad does not work anymore (and also resume itself gets slowed down because of the timeout). Prevent sending of feature/output reports while the device is being reset by adding a mutex which is held during that time. Reported-and-tested-by: Linus Torvalds Reported-by: Nish Aravamudan Suggested-by: Benjamin Tissoires Reviewed-by: Benjamin Tissoires Signed-off-by: Mika Westerberg Signed-off-by: Jiri Kosina

HID: use kobj_to_dev()

2015-12-28T12:41:51Z

Use kobj_to_dev() instead of open-coding it. Signed-off-by: Geliang Tang Signed-off-by: Jiri Kosina