linux/drivers/hid, branch v4.7

HID: multitouch: enable palm rejection for Windows Precision Touchpad

2016-06-28T11:24:14Z

The usage Confidence is mandary to Windows Precision Touchpad devices. If it is examined in input_mapping on a WIndows Precision Touchpad, a new add quirk MT_QUIRK_CONFIDENCE desgned for such devices will be applied to the device. A touch with the confidence bit is not set is determined as invalid. Tested on Dell XPS13 9343 Cc: stable@vger.kernel.org # v4.5+ Reviewed-by: Benjamin Tissoires Tested-by: Andy Lutomirski # XPS 13 9350, BIOS 1.4.3 Signed-off-by: Allen Hung Signed-off-by: Jiri Kosina

Revert "HID: multitouch: enable palm rejection if device implements confidence usage"

2016-06-28T11:24:14Z

This reverts commit 25a84db15b3f ("HID: multitouch: enable palm rejection if device implements confidence usage") The commit enables palm rejection for Win8 Precision Touchpad devices but the quirk MT_QUIRK_VALID_IS_CONFIDENCE it is using is not working very properly. This quirk is originally designed for some WIn7 touchscreens. Use of this for a Win8 Precision Touchpad will cause unexpected pointer jumping problem. Cc: stable@vger.kernel.org # v4.5+ Reviewed-by: Benjamin Tissoires Tested-by: Andy Lutomirski # XPS 13 9350, BIOS 1.4.3 Signed-off-by: Allen Hung Signed-off-by: Jiri Kosina

HID: hiddev: validate num_values for HIDIOCGUSAGES, HIDIOCSUSAGES commands

2016-06-24T08:21:39Z

This patch validates the num_values parameter from userland during the HIDIOCGUSAGES and HIDIOCSUSAGES commands. Previously, if the report id was set to HID_REPORT_ID_UNKNOWN, we would fail to validate the num_values parameter leading to a heap overflow. Cc: stable@vger.kernel.org Signed-off-by: Scott Bauer Signed-off-by: Jiri Kosina

HID: multitouch: Add MT_QUIRK_NOT_SEEN_MEANS_UP to Surface Pro 3

2016-06-01T14:03:28Z

The firmware found in the touch screen of an SP3 is buggy and may miss to send lift off reports for contacts. Try to work around that issue by using MT_QUIRK_NOT_SEEN_MEANS_UP. based on a patch from: Daniel Martin Signed-off-by: Benjamin Tissoires Signed-off-by: Jiri Kosina

HID: elo: kill not flush the work

2016-06-01T12:08:17Z

Flushing a work that reschedules itself is not a sensible operation. It needs to be killed. Failure to do so leads to a kernel panic in the timer code. CC: stable@vger.kernel.org Signed-off-by: Oliver Neukum Reviewed-by: Benjamin Tissoires Signed-off-by: Jiri Kosina

Merge branch 'for-4.7/wacom' into for-linus

2016-05-17T10:42:27Z

Merge branch 'for-4.7/upstream' into for-linus

2016-05-17T10:41:22Z

Conflicts: drivers/hid/usbhid/hid-quirks.c

Merge branches 'for-4.6/upstream-fixes', 'for-4.7/asus', 'for-4.7/hidraw' and 'for-4.7/thingm' into for-linus

2016-05-17T10:38:03Z

HID: wacom: add missed stylus_in_proximity line back

2016-05-03T10:03:44Z

Commit 7e12978 ("HID: wacom: break out wacom_intuos_get_tool_type") by accident removed stylus_in_proximity flag for Intuos series while shuffling the code around. Fix that by reintroducing that flag setting in wacom_intuos_inout(), where it originally was. Fixes: 7e12978 ("HID: wacom: break out wacom_intuos_get_tool_type") Signed-off-by: Ping Cheng Signed-off-by: Jiri Kosina

HID: wacom: Add fuzz factor to distance and tilt axes

2016-05-03T09:55:05Z

The fuzz present on the distance and tilt axes is noticable when a puck is present, and userspace (specifically libinput) would like the ability to filter out the noise. To facilitate this, we assign a fuzz value of '1' for the distance and tilt axes. This is large enough to cover most of the natural variation in distance value as the puck is moved around, and enough to cover the jitter in rotation (reported through tilt axes) when the puck is left alone. Signed-off-by: Jason Gerecke Signed-off-by: Jiri Kosina