linux/drivers/hid, branch v5.5

HID: hidraw, uhid: Always report EPOLLOUT

2020-01-10T14:34:28Z

hidraw and uhid device nodes are always available for writing so we should always report EPOLLOUT and EPOLLWRNORM bits, not only in the cases when there is nothing to read. Reported-by: Linus Torvalds Fixes: be54e7461ffdc ("HID: uhid: Fix returning EPOLLOUT from uhid_char_poll") Fixes: 9f3b61dc1dd7b ("HID: hidraw: Fix returning EPOLLOUT from hidraw_poll") Signed-off-by: Jiri Kosina

HID: steam: Fix input device disappearing

2020-01-09T09:57:41Z

The `connected` value for wired devices was not properly initialized, it must be set to `true` upon creation, because wired devices do not generate connection events. When a raw client (the Steam Client) uses the device, the input device is destroyed. Then, when the raw client finishes, it must be recreated. But since the `connected` variable was false this never happended. Signed-off-by: Rodrigo Rivas Costa Signed-off-by: Jiri Kosina

HID: intel-ish-hid: ipc: Add Tiger Lake PCI device ID

2019-12-29T20:39:03Z

Added Tiger Lake PCI device ID to the supported device list. Signed-off-by: Srinivas Pandruvada Signed-off-by: Jiri Kosina

drivers/hid/hid-multitouch.c: fix a possible null pointer access.

2019-12-19T09:22:25Z

1002 if ((quirks & MT_QUIRK_IGNORE_DUPLICATES) && mt) { 1003 struct input_mt_slot *i_slot = &mt->slots[slotnum]; 1004 1005 if (input_mt_is_active(i_slot) && 1006 input_mt_is_used(mt, i_slot)) 1007 return -EAGAIN; 1008 } We previously assumed 'mt' could be null (see line 1002). The following situation is similar, so add a judgement. Signed-off-by: Pan Zhang Signed-off-by: Benjamin Tissoires

HID: wacom: Recognize new MobileStudio Pro PID

2019-12-18T14:24:26Z

A new PID is in use for repaired MobileStudio Pro devices. Add it to the list of devices that need special-casing in wacom_wac_pad_event. Signed-off-by: Jason Gerecke Signed-off-by: Benjamin Tissoires

HID: intel-ish-hid: ipc: add CMP device id

2019-12-18T14:21:24Z

Add Comet Lake H into ishtp support list. Signed-off-by: Even Xu Acked-by: Srinivas Pandruvada Signed-off-by: Benjamin Tissoires

HID: hiddev: fix mess in hiddev_open()

2019-12-18T14:18:38Z

The open method of hiddev handler fails to bring the device out of autosuspend state as was promised in 0361a28d3f9a, as it actually has 2 blocks that try to start the transport (call hid_hw_open()) with both being guarded by the "open" counter, so the 2nd block is never executed as the first block increments the counter so it is never at 0 when we check it for the second block. Additionally hiddev_open() was leaving counter incremented on errors, causing the device to never be reopened properly if there was ever an error. Let's fix all of this by factoring out code that creates client structure and powers up the device into a separate function that is being called from usbhid_open() with the "existancelock" being held. Fixes: 0361a28d3f9a ("HID: autosuspend support for USB HID") Signed-off-by: Dmitry Torokhov Signed-off-by: Benjamin Tissoires

HID: hid-input: clear unmapped usages

2019-12-13T12:43:15Z

We should not be leaving half-mapped usages with potentially invalid keycodes, as that may confuse hidinput_find_key() when the key is located by index, which may end up feeding way too large keycode into the VT keyboard handler and cause OOB write there: BUG: KASAN: global-out-of-bounds in clear_bit include/asm-generic/bitops-instrumented.h:56 [inline] BUG: KASAN: global-out-of-bounds in kbd_keycode drivers/tty/vt/keyboard.c:1411 [inline] BUG: KASAN: global-out-of-bounds in kbd_event+0xe6b/0x3790 drivers/tty/vt/keyboard.c:1495 Write of size 8 at addr ffffffff89a1b2d8 by task syz-executor108/1722 ... kbd_keycode drivers/tty/vt/keyboard.c:1411 [inline] kbd_event+0xe6b/0x3790 drivers/tty/vt/keyboard.c:1495 input_to_handler+0x3b6/0x4c0 drivers/input/input.c:118 input_pass_values.part.0+0x2e3/0x720 drivers/input/input.c:145 input_pass_values drivers/input/input.c:949 [inline] input_set_keycode+0x290/0x320 drivers/input/input.c:954 evdev_handle_set_keycode_v2+0xc4/0x120 drivers/input/evdev.c:882 evdev_do_ioctl drivers/input/evdev.c:1150 [inline] Cc: stable@vger.kernel.org Reported-by: syzbot+19340dff067c2d3835c0@syzkaller.appspotmail.com Signed-off-by: Dmitry Torokhov Tested-by: Benjamin Tissoires Signed-off-by: Jiri Kosina

HID: Add quirk for incorrect input length on Lenovo Y720

2019-12-13T12:03:48Z

Apply it to the Lenovo Y720 gaming laptop I2C peripheral then. This fixes dmesg being flooded with errors visible on un-suspend in Linux Mint 19 Cinnamon. Example of error log: <...> [ 4.326588] i2c_hid i2c-ITE33D1:00: i2c_hid_get_input: incomplete report (2/4) [ 4.326845] i2c_hid i2c-ITE33D1:00: i2c_hid_get_input: incomplete report (2/4) [ 4.327095] i2c_hid i2c-ITE33D1:00: i2c_hid_get_input: incomplete report (2/4) [ 4.327341] i2c_hid i2c-ITE33D1:00: i2c_hid_get_input: incomplete report (2/4) [ 4.327609] i2c_hid i2c-ITE33D1:00: i2c_hid_get_input: incomplete report (2/4) <...> Example of fixed log (debug on) <...> [ 3731.333183] i2c_hid i2c-ITE33D1:00: input: 02 00 [ 3731.333581] i2c_hid i2c-ITE33D1:00: input: 02 00 [ 3731.333842] i2c_hid i2c-ITE33D1:00: input: 02 00 [ 3731.334107] i2c_hid i2c-ITE33D1:00: input: 02 00 [ 3731.334367] i2c_hid i2c-ITE33D1:00: input: 02 00 <...> [jkosina@suse.cz: rebase onto more recent codebase] Signed-off-by: Pavel Balan Signed-off-by: Jiri Kosina

HID: asus: Ignore Asus vendor-page usage-code 0xff events

2019-12-13T09:26:18Z

At least on a T100HA an Asus vendor-page usage-code 0xff event is send on every suspend and again on resume, resulting in the following warning: asus 0003:0B05:1807.0002: Unmapped Asus vendor usagepage code 0xff being logged twice on every suspend/resume. This commit silences the "Unmapped Asus vendor usagepage code ..." warning for usage-code 0xff to avoid these warnings being logged. Signed-off-by: Hans de Goede Signed-off-by: Jiri Kosina