linux/drivers/hid, branch v5.7

HID: quirks: Add HID_QUIRK_NO_INIT_REPORTS quirk for Dell K12A keyboard-dock

2020-05-04T09:24:58Z

Add a HID_QUIRK_NO_INIT_REPORTS quirk for the Dell K12A keyboard-dock, which can be used with various Dell Venue 11 models. Without this quirk the keyboard/touchpad combo works fine when connected at boot, but when hotplugged 9 out of 10 times it will not work properly. Adding the quirk fixes this. Cc: Mario Limonciello Signed-off-by: Hans de Goede Signed-off-by: Jiri Kosina

HID: mcp2221: add gpiolib dependency

2020-04-29T19:47:41Z

Without gpiolib, this driver fails to link: arm-linux-gnueabi-ld: drivers/hid/hid-mcp2221.o: in function `mcp2221_probe': hid-mcp2221.c:(.text+0x1b0): undefined reference to `devm_gpiochip_add_data' arm-linux-gnueabi-ld: drivers/hid/hid-mcp2221.o: in function `mcp_gpio_get': hid-mcp2221.c:(.text+0x30c): undefined reference to `gpiochip_get_data' Fixes: 328de1c519c5 ("HID: mcp2221: add GPIO functionality support") Signed-off-by: Arnd Bergmann Reviewed-by: Rishi Gupta Signed-off-by: Jiri Kosina

HID: i2c-hid: reset Synaptics SYNA2393 on resume

2020-04-29T19:44:48Z

On the Dell XPS 9570, the Synaptics SYNA2393 touchpad generates spurious interrupts after resuming from suspend until it receives some input or is reset. Add it to the quirk I2C_HID_QUIRK_RESET_ON_RESUME so that it is reset when resuming from suspend. More information about the bug can be found in this mailing list discussion: https://www.spinics.net/lists/linux-input/msg59530.html Signed-off-by: Daniel Playfair Cal Signed-off-by: Jiri Kosina

HID: wacom: Report 2nd-gen Intuos Pro S center button status over BT

2020-04-29T19:40:53Z

The state of the center button was not reported to userspace for the 2nd-gen Intuos Pro S when used over Bluetooth due to the pad handling code not being updated to support its reduced number of buttons. This patch uses the actual number of buttons present on the tablet to assemble a button state bitmap. Link: https://github.com/linuxwacom/xf86-input-wacom/issues/112 Fixes: cd47de45b855 ("HID: wacom: Add 2nd gen Intuos Pro Small support") Signed-off-by: Jason Gerecke Cc: stable@vger.kernel.org # v5.3+ Signed-off-by: Jiri Kosina

HID: usbhid: Fix race between usbhid_close() and usbhid_stop()

2020-04-29T14:24:26Z

The syzbot fuzzer discovered a bad race between in the usbhid driver between usbhid_stop() and usbhid_close(). In particular, usbhid_stop() does: usb_free_urb(usbhid->urbin); ... usbhid->urbin = NULL; /* don't mess up next start */ and usbhid_close() does: usb_kill_urb(usbhid->urbin); with no mutual exclusion. If the two routines happen to run concurrently so that usb_kill_urb() is called in between the usb_free_urb() and the NULL assignment, it will access the deallocated urb structure -- a use-after-free bug. This patch adds a mutex to the usbhid private structure and uses it to enforce mutual exclusion of the usbhid_start(), usbhid_stop(), usbhid_open() and usbhid_close() callbacks. Reported-and-tested-by: syzbot+7bf5a7b0f0a1f9446f4c@syzkaller.appspotmail.com Signed-off-by: Alan Stern CC: Signed-off-by: Jiri Kosina

Revert "HID: wacom: generic: read the number of expected touches on a per collection basis"

2020-04-16T19:38:47Z

This reverts commit 15893fa40109f5e7c67eeb8da62267d0fdf0be9d. The referenced commit broke pen and touch input for a variety of devices such as the Cintiq Pro 32. Affected devices may appear to work normally for a short amount of time, but eventually loose track of actual touch state and can leave touch arbitration enabled which prevents the pen from working. The commit is not itself required for any currently-available Bluetooth device, and so we revert it to correct the behavior of broken devices. This breakage occurs due to a mismatch between the order of collections and the order of usages on some devices. This commit tries to read the contact count before processing events, but will fail if the contact count does not occur prior to the first logical finger collection. This is the case for devices like the Cintiq Pro 32 which place the contact count at the very end of the report. Without the contact count set, touches will only be partially processed. The `wacom_wac_finger_slot` function will not open any slots since the number of contacts seen is greater than the expectation of 0, but we will still end up calling `input_mt_sync_frame` for each finger anyway. This can cause problems for userspace separate from the issue currently taking place in the kernel. Only once all of the individual finger collections have been processed do we finally get to the enclosing collection which contains the contact count. The value ends up being used for the *next* report, however. This delayed use of the contact count can cause the driver to loose track of the actual touch state and believe that there are contacts down when there aren't. This leaves touch arbitration enabled and prevents the pen from working. It can also cause userspace to incorrectly treat single- finger input as gestures. Link: https://github.com/linuxwacom/input-wacom/issues/146 Signed-off-by: Jason Gerecke Reviewed-by: Aaron Armstrong Skomra Fixes: 15893fa40109 ("HID: wacom: generic: read the number of expected touches on a per collection basis") Cc: stable@vger.kernel.org # 5.3+ Signed-off-by: Jiri Kosina

HID: alps: ALPS_1657 is too specific; use U1_UNICORN_LEGACY instead

2020-04-15T12:51:42Z

HID_DEVICE_ID_ALPS_1657 PID is too specific, as there are many other ALPS hardware IDs using this particular touchpad. Rename the identifier to HID_DEVICE_ID_ALPS_U1_UNICORN_LEGACY in order to describe reality better. Fixes: 640e403b1fd24 ("HID: alps: Add AUI1657 device ID") Reported-by: Xiaojian Cao Signed-off-by: Jiri Kosina

HID: alps: Add AUI1657 device ID

2020-04-14T09:21:48Z

This device is used on Lenovo V130-15IKB variants and uses the same registers as U1. Signed-off-by: Artem Borisov Signed-off-by: Jiri Kosina

HID: logitech: Add support for Logitech G11 extra keys

2020-04-14T09:15:36Z

The Logitech G11 keyboard is a cheap variant of the G15 without the LCD screen. It uses the same layout for its extra and macro keys (G1 - G18, M1-M3, MR) and - from the input subsystem's perspective - behaves just like the G15, so we can treat it as such. Tested it with my own keyboard. Signed-off-by: Fabian Schindlatz Reviewed-by: Hans de Goede Signed-off-by: Jiri Kosina

HID: multitouch: add eGalaxTouch P80H84 support

2020-04-14T09:14:11Z

Add support for P80H84 touchscreen from eGalaxy: idVendor 0x0eef D-WAV Scientific Co., Ltd idProduct 0xc002 iManufacturer 1 eGalax Inc. iProduct 2 eGalaxTouch P80H84 2019 vDIVA_1204_T01 k4.02.146 Signed-off-by: Sebastian Reichel Signed-off-by: Jiri Kosina