linux/drivers/hid, branch v6.14

Merge tag 'hid-for-linus-2025030501' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid

2025-03-05T17:46:59Z

Pull HID fixes from Jiri Kosina: - power management fix in intel-thc-hid (Even Xu) - nintendo gencon mapping fix (Ryan McClelland) - fix for UAF on device diconnect path in hid-steam (Vicki Pfau) - two fixes for UAF on device disconnect path in intel-ish-hid (Zhang Lixu) - fix for potential NULL dereference in hid-appleir (Daniil Dulov) - few other small cosmetic fixes (e.g. typos) * tag 'hid-for-linus-2025030501' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: Intel-thc-hid: Intel-quickspi: Correct device state after S4 HID: intel-thc-hid: Fix spelling mistake "intput" -> "input" HID: hid-steam: Fix use-after-free when detaching device HID: debug: Fix spelling mistake "Messanger" -> "Messenger" HID: appleir: Fix potential NULL dereference at raw event handle HID: apple: disable Fn key handling on the Omoton KB066 HID: i2c-hid: improve i2c_hid_get_report error message HID: intel-ish-hid: Fix use-after-free issue in ishtp_hid_remove() HID: intel-ish-hid: Fix use-after-free issue in hid_ishtp_cl_remove() HID: google: fix unused variable warning under !CONFIG_ACPI HID: nintendo: fix gencon button events map HID: corsair-void: Update power supply values with a unified work handler

HID: Intel-thc-hid: Intel-quickspi: Correct device state after S4

2025-03-04T20:54:30Z

During S4 retore flow, quickspi device was resetted by driver and state was changed to RESETTED. It is needed to be change to ENABLED state after S4 re-initialization finished, otherwise, device will run in wrong state and HID input data will be dropped. Signed-off-by: Even Xu Fixes: 6912aaf3fd24 ("HID: intel-thc-hid: intel-quickspi: Add PM implementation") Signed-off-by: Jiri Kosina

HID: intel-thc-hid: Fix spelling mistake "intput" -> "input"

2025-03-04T20:47:23Z

There is a spelling mistake in a dev_err_once message. Fix it. Signed-off-by: Colin Ian King Reviewed-by: Even Xu Signed-off-by: Jiri Kosina

HID: hid-steam: Fix use-after-free when detaching device

2025-03-04T20:46:12Z

When a hid-steam device is removed it must clean up the client_hdev used for intercepting hidraw access. This can lead to scheduling deferred work to reattach the input device. Though the cleanup cancels the deferred work, this was done before the client_hdev itself is cleaned up, so it gets rescheduled. This patch fixes the ordering to make sure the deferred work is properly canceled. Reported-by: syzbot+0154da2d403396b2bd59@syzkaller.appspotmail.com Fixes: 79504249d7e2 ("HID: hid-steam: Move hidraw input (un)registering to work") Signed-off-by: Vicki Pfau Signed-off-by: Jiri Kosina

HID: debug: Fix spelling mistake "Messanger" -> "Messenger"

2025-03-04T20:45:06Z

There is a spelling mistake in a literal string. Fix it. Signed-off-by: Colin Ian King Signed-off-by: Jiri Kosina

HID: appleir: Fix potential NULL dereference at raw event handle

2025-03-04T20:39:39Z

Syzkaller reports a NULL pointer dereference issue in input_event(). BUG: KASAN: null-ptr-deref in instrument_atomic_read include/linux/instrumented.h:68 [inline] BUG: KASAN: null-ptr-deref in _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline] BUG: KASAN: null-ptr-deref in is_event_supported drivers/input/input.c:67 [inline] BUG: KASAN: null-ptr-deref in input_event+0x42/0xa0 drivers/input/input.c:395 Read of size 8 at addr 0000000000000028 by task syz-executor199/2949 CPU: 0 UID: 0 PID: 2949 Comm: syz-executor199 Not tainted 6.13.0-rc4-syzkaller-00076-gf097a36ef88d #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Call Trace: __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 kasan_report+0xd9/0x110 mm/kasan/report.c:602 check_region_inline mm/kasan/generic.c:183 [inline] kasan_check_range+0xef/0x1a0 mm/kasan/generic.c:189 instrument_atomic_read include/linux/instrumented.h:68 [inline] _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline] is_event_supported drivers/input/input.c:67 [inline] input_event+0x42/0xa0 drivers/input/input.c:395 input_report_key include/linux/input.h:439 [inline] key_down drivers/hid/hid-appleir.c:159 [inline] appleir_raw_event+0x3e5/0x5e0 drivers/hid/hid-appleir.c:232 __hid_input_report.constprop.0+0x312/0x440 drivers/hid/hid-core.c:2111 hid_ctrl+0x49f/0x550 drivers/hid/usbhid/hid-core.c:484 __usb_hcd_giveback_urb+0x389/0x6e0 drivers/usb/core/hcd.c:1650 usb_hcd_giveback_urb+0x396/0x450 drivers/usb/core/hcd.c:1734 dummy_timer+0x17f7/0x3960 drivers/usb/gadget/udc/dummy_hcd.c:1993 __run_hrtimer kernel/time/hrtimer.c:1739 [inline] __hrtimer_run_queues+0x20a/0xae0 kernel/time/hrtimer.c:1803 hrtimer_run_softirq+0x17d/0x350 kernel/time/hrtimer.c:1820 handle_softirqs+0x206/0x8d0 kernel/softirq.c:561 __do_softirq kernel/softirq.c:595 [inline] invoke_softirq kernel/softirq.c:435 [inline] __irq_exit_rcu+0xfa/0x160 kernel/softirq.c:662 irq_exit_rcu+0x9/0x30 kernel/softirq.c:678 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1049 [inline] sysvec_apic_timer_interrupt+0x90/0xb0 arch/x86/kernel/apic/apic.c:1049 asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702 __mod_timer+0x8f6/0xdc0 kernel/time/timer.c:1185 add_timer+0x62/0x90 kernel/time/timer.c:1295 schedule_timeout+0x11f/0x280 kernel/time/sleep_timeout.c:98 usbhid_wait_io+0x1c7/0x380 drivers/hid/usbhid/hid-core.c:645 usbhid_init_reports+0x19f/0x390 drivers/hid/usbhid/hid-core.c:784 hiddev_ioctl+0x1133/0x15b0 drivers/hid/usbhid/hiddev.c:794 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl fs/ioctl.c:892 [inline] __x64_sys_ioctl+0x190/0x200 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f This happens due to the malformed report items sent by the emulated device which results in a report, that has no fields, being added to the report list. Due to this appleir_input_configured() is never called, hidinput_connect() fails which results in the HID_CLAIMED_INPUT flag is not being set. However, it does not make appleir_probe() fail and lets the event callback to be called without the associated input device. Thus, add a check for the HID_CLAIMED_INPUT flag and leave the event hook early if the driver didn't claim any input_dev for some reason. Moreover, some other hid drivers accessing input_dev in their event callbacks do have similar checks, too. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 9a4a5574ce42 ("HID: appleir: add support for Apple ir devices") Cc: stable@vger.kernel.org Signed-off-by: Daniil Dulov Signed-off-by: Jiri Kosina

HID: apple: disable Fn key handling on the Omoton KB066

2025-03-04T20:35:56Z

Remove the fixup to make the Omoton KB066's F6 key F6 when not holding Fn. That was really just a hack to allow typing F6 in fnmode>0, and it didn't fix any of the other F keys that were likewise untypable in fnmode>0. Instead, because the Omoton's Fn key is entirely internal to the keyboard, completely disable Fn key translation when an Omoton is detected, which will prevent the hid-apple driver from interfering with the keyboard's built-in Fn key handling. All of the F keys, including F6, are then typable when Fn is held. The Omoton KB066 and the Apple A1255 both have HID product code 05ac:022c. The self-reported name of every original A1255 when they left the factory was "Apple Wireless Keyboard". By default, Mac OS changes the name to "'s keyboard" when pairing with the keyboard, but Mac OS allows the user to set the internal name of Apple keyboards to anything they like. The Omoton KB066's name, on the other hand, is not configurable: It is always "Bluetooth Keyboard". Because that name is so generic that a user might conceivably use the same name for a real Apple keyboard, detect Omoton keyboards based on both having that exact name and having HID product code 022c. Fixes: 819083cb6eed ("HID: apple: fix up the F6 key on the Omoton KB066 keyboard") Signed-off-by: Alex Henrie Reviewed-by: Aditya Garg Signed-off-by: Jiri Kosina

HID: i2c-hid: improve i2c_hid_get_report error message

2025-03-04T20:26:29Z

We have two places to print "failed to set a report to ...", use "get a report from" instead of "set a report to", it makes people who knows less about the module to know where the error happened. Before: i2c_hid_acpi i2c-FTSC1000:00: failed to set a report to device: -11 After: i2c_hid_acpi i2c-FTSC1000:00: failed to get a report from device: -11 Signed-off-by: Wentao Guan Signed-off-by: Jiri Kosina

HID: intel-ish-hid: Fix use-after-free issue in ishtp_hid_remove()

2025-02-19T09:09:27Z

The system can experience a random crash a few minutes after the driver is removed. This issue occurs due to improper handling of memory freeing in the ishtp_hid_remove() function. The function currently frees the `driver_data` directly within the loop that destroys the HID devices, which can lead to accessing freed memory. Specifically, `hid_destroy_device()` uses `driver_data` when it calls `hid_ishtp_set_feature()` to power off the sensor, so freeing `driver_data` beforehand can result in accessing invalid memory. This patch resolves the issue by storing the `driver_data` in a temporary variable before calling `hid_destroy_device()`, and then freeing the `driver_data` after the device is destroyed. Fixes: 0b28cb4bcb17 ("HID: intel-ish-hid: ISH HID client driver") Signed-off-by: Zhang Lixu Acked-by: Srinivas Pandruvada Signed-off-by: Jiri Kosina

HID: intel-ish-hid: Fix use-after-free issue in hid_ishtp_cl_remove()

2025-02-19T09:09:27Z

During the `rmmod` operation for the `intel_ishtp_hid` driver, a use-after-free issue can occur in the hid_ishtp_cl_remove() function. The function hid_ishtp_cl_deinit() is called before ishtp_hid_remove(), which can lead to accessing freed memory or resources during the removal process. Call Trace: ? ishtp_cl_send+0x168/0x220 [intel_ishtp] ? hid_output_report+0xe3/0x150 [hid] hid_ishtp_set_feature+0xb5/0x120 [intel_ishtp_hid] ishtp_hid_request+0x7b/0xb0 [intel_ishtp_hid] hid_hw_request+0x1f/0x40 [hid] sensor_hub_set_feature+0x11f/0x190 [hid_sensor_hub] _hid_sensor_power_state+0x147/0x1e0 [hid_sensor_trigger] hid_sensor_runtime_resume+0x22/0x30 [hid_sensor_trigger] sensor_hub_remove+0xa8/0xe0 [hid_sensor_hub] hid_device_remove+0x49/0xb0 [hid] hid_destroy_device+0x6f/0x90 [hid] ishtp_hid_remove+0x42/0x70 [intel_ishtp_hid] hid_ishtp_cl_remove+0x6b/0xb0 [intel_ishtp_hid] ishtp_cl_device_remove+0x4a/0x60 [intel_ishtp] ... Additionally, ishtp_hid_remove() is a HID level power off, which should occur before the ISHTP level disconnect. This patch resolves the issue by reordering the calls in hid_ishtp_cl_remove(). The function ishtp_hid_remove() is now called before hid_ishtp_cl_deinit(). Fixes: f645a90e8ff7 ("HID: intel-ish-hid: ishtp-hid-client: use helper functions for connection") Signed-off-by: Zhang Lixu Acked-by: Srinivas Pandruvada Signed-off-by: Jiri Kosina