linux/drivers/hv, branch v6.7

Merge tag 'tty-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2023-11-04T01:44:25Z

Pull tty and serial updates from Greg KH: "Here is the big set of tty/serial driver changes for 6.7-rc1. Included in here are: - console/vgacon cleanups and removals from Arnd - tty core and n_tty cleanups from Jiri - lots of 8250 driver updates and cleanups - sc16is7xx serial driver updates - dt binding updates - first set of port lock wrapers from Thomas for the printk fixes coming in future releases - other small serial and tty core cleanups and updates All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (193 commits) serdev: Replace custom code with device_match_acpi_handle() serdev: Simplify devm_serdev_device_open() function serdev: Make use of device_set_node() tty: n_gsm: add copyright Siemens Mobility GmbH tty: n_gsm: fix race condition in status line change on dead connections serial: core: Fix runtime PM handling for pending tx vgacon: fix mips/sibyte build regression dt-bindings: serial: drop unsupported samsung bindings tty: serial: samsung: drop earlycon support for unsupported platforms tty: 8250: Add note for PX-835 tty: 8250: Fix IS-200 PCI ID comment tty: 8250: Add Brainboxes Oxford Semiconductor-based quirks tty: 8250: Add support for Intashield IX cards tty: 8250: Add support for additional Brainboxes PX cards tty: 8250: Fix up PX-803/PX-857 tty: 8250: Fix port count of PX-257 tty: 8250: Add support for Intashield IS-100 tty: 8250: Add support for Brainboxes UP cards tty: 8250: Add support for additional Brainboxes UC cards tty: 8250: Remove UC-257 and UC-431 ...

hyperv: avoid dependency on screen_info

2023-10-17T08:17:02Z

The two hyperv framebuffer drivers (hyperv_fb or hyperv_drm_drv) access the global screen_info in order to take over from the sysfb framebuffer, which in turn could be handled by simplefb, simpledrm or efifb. Similarly, the vmbus_drv code marks the original EFI framebuffer as reserved, but this is not required if there is no sysfb. As a preparation for making screen_info itself more local to the sysfb helper code, add a compile-time conditional in all three files that relate to hyperv fb and just skip this code if there is no sysfb that needs to be unregistered. Reviewed-by: Javier Martinez Canillas Acked-by: Helge Deller Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20231009211845.3136536-9-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman

Drivers: hv: Remove now superfluous sentinel element from ctl_table array

2023-10-11T19:16:14Z

This commit comes at the tail end of a greater effort to remove the empty elements at the end of the ctl_table arrays (sentinels) which will reduce the overall build time size of the kernel and run time memory bloat by ~64 bytes per sentinel (further information Link : https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/) Remove sentinel from hv_ctl_table Signed-off-by: Joel Granados Signed-off-by: Luis Chamberlain

Merge tag 'hyperv-next-signed-20230902' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

2023-09-04T18:26:29Z

Pull hyperv updates from Wei Liu: - Support for SEV-SNP guests on Hyper-V (Tianyu Lan) - Support for TDX guests on Hyper-V (Dexuan Cui) - Use SBRM API in Hyper-V balloon driver (Mitchell Levy) - Avoid dereferencing ACPI root object handle in VMBus driver (Maciej Szmigiero) - A few misecllaneous fixes (Jiapeng Chong, Nathan Chancellor, Saurabh Sengar) * tag 'hyperv-next-signed-20230902' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (24 commits) x86/hyperv: Remove duplicate include x86/hyperv: Move the code in ivm.c around to avoid unnecessary ifdef's x86/hyperv: Remove hv_isolation_type_en_snp x86/hyperv: Use TDX GHCI to access some MSRs in a TDX VM with the paravisor Drivers: hv: vmbus: Bring the post_msg_page back for TDX VMs with the paravisor x86/hyperv: Introduce a global variable hyperv_paravisor_present Drivers: hv: vmbus: Support >64 VPs for a fully enlightened TDX/SNP VM x86/hyperv: Fix serial console interrupts for fully enlightened TDX guests Drivers: hv: vmbus: Support fully enlightened TDX guests x86/hyperv: Support hypercalls for fully enlightened TDX guests x86/hyperv: Add hv_isolation_type_tdx() to detect TDX guests x86/hyperv: Fix undefined reference to isolation_type_en_snp without CONFIG_HYPERV x86/hyperv: Add missing 'inline' to hv_snp_boot_ap() stub hv: hyperv.h: Replace one-element array with flexible-array member Drivers: hv: vmbus: Don't dereference ACPI root object handle x86/hyperv: Add hyperv-specific handling for VMMCALL under SEV-ES x86/hyperv: Add smp support for SEV-SNP guest clocksource: hyper-v: Mark hyperv tsc page unencrypted in sev-snp enlightened guest x86/hyperv: Use vmmcall to implement Hyper-V hypercall in sev-snp enlightened guest drivers: hv: Mark percpu hvcall input arg page unencrypted in SEV-SNP enlightened guest ...

x86/hyperv: Remove hv_isolation_type_en_snp

2023-08-25T00:04:57Z

In ms_hyperv_init_platform(), do not distinguish between a SNP VM with the paravisor and a SNP VM without the paravisor. Replace hv_isolation_type_en_snp() with !ms_hyperv.paravisor_present && hv_isolation_type_snp(). The hv_isolation_type_en_snp() in drivers/hv/hv.c and drivers/hv/hv_common.c can be changed to hv_isolation_type_snp() since we know !ms_hyperv.paravisor_present is true there. Signed-off-by: Dexuan Cui Reviewed-by: Michael Kelley Reviewed-by: Tianyu Lan Signed-off-by: Wei Liu Link: https://lore.kernel.org/r/20230824080712.30327-10-decui@microsoft.com

Drivers: hv: vmbus: Bring the post_msg_page back for TDX VMs with the paravisor

2023-08-25T00:04:57Z

The post_msg_page was removed in commit 9a6b1a170ca8 ("Drivers: hv: vmbus: Remove the per-CPU post_msg_page") However, it turns out that we need to bring it back, but only for a TDX VM with the paravisor: in such a VM, the hyperv_pcpu_input_arg is not decrypted, but the HVCALL_POST_MESSAGE in such a VM needs a decrypted page as the hypercall input page: see the comments in hyperv_init() for a detailed explanation. Except for HVCALL_POST_MESSAGE and HVCALL_SIGNAL_EVENT, the other hypercalls in a TDX VM with the paravisor still use hv_hypercall_pg and must use the hyperv_pcpu_input_arg (which is encrypted in such a VM), when a hypercall input page is used. Signed-off-by: Dexuan Cui Reviewed-by: Tianyu Lan Reviewed-by: Michael Kelley Signed-off-by: Wei Liu Link: https://lore.kernel.org/r/20230824080712.30327-8-decui@microsoft.com

x86/hyperv: Introduce a global variable hyperv_paravisor_present

2023-08-25T00:04:57Z

The new variable hyperv_paravisor_present is set only when the VM is a SNP/TDX VM with the paravisor running: see ms_hyperv_init_platform(). We introduce hyperv_paravisor_present because we can not use ms_hyperv.paravisor_present in arch/x86/include/asm/mshyperv.h: struct ms_hyperv_info is defined in include/asm-generic/mshyperv.h, which is included at the end of arch/x86/include/asm/mshyperv.h, but at the beginning of arch/x86/include/asm/mshyperv.h, we would already need to use struct ms_hyperv_info in hv_do_hypercall(). We use hyperv_paravisor_present only in include/asm-generic/mshyperv.h, and use ms_hyperv.paravisor_present elsewhere. In the future, we'll introduce a hypercall function structure for different VM types, and at boot time, the right function pointers would be written into the structure so that runtime testing of TDX vs. SNP vs. normal will be avoided and hyperv_paravisor_present will no longer be needed. Call hv_vtom_init() when it's a VBS VM or when ms_hyperv.paravisor_present is true, i.e. the VM is a SNP VM or TDX VM with the paravisor. Enhance hv_vtom_init() for a TDX VM with the paravisor. In hv_common_cpu_init(), don't decrypt the hyperv_pcpu_input_arg for a TDX VM with the paravisor, just like we don't decrypt the page for a SNP VM with the paravisor. Signed-off-by: Dexuan Cui Reviewed-by: Tianyu Lan Reviewed-by: Michael Kelley Signed-off-by: Wei Liu Link: https://lore.kernel.org/r/20230824080712.30327-7-decui@microsoft.com

Drivers: hv: vmbus: Support >64 VPs for a fully enlightened TDX/SNP VM

2023-08-25T00:04:56Z

Don't set *this_cpu_ptr(hyperv_pcpu_input_arg) before the function set_memory_decrypted() returns, otherwise we run into this ticky issue: For a fully enlightened TDX/SNP VM, in hv_common_cpu_init(), *this_cpu_ptr(hyperv_pcpu_input_arg) is an encrypted page before the set_memory_decrypted() returns. When such a VM has more than 64 VPs, if the hyperv_pcpu_input_arg is not NULL, hv_common_cpu_init() -> set_memory_decrypted() -> ... -> cpa_flush() -> on_each_cpu() -> ... -> hv_send_ipi_mask() -> ... -> __send_ipi_mask_ex() tries to call hv_do_rep_hypercall() with the hyperv_pcpu_input_arg as the hypercall input page, which must be a decrypted page in such a VM, but the page is still encrypted at this point, and a fatal fault is triggered. Fix the issue by setting *this_cpu_ptr(hyperv_pcpu_input_arg) after set_memory_decrypted(): if the hyperv_pcpu_input_arg is NULL, __send_ipi_mask_ex() returns HV_STATUS_INVALID_PARAMETER immediately, and hv_send_ipi_mask() falls back to orig_apic.send_IPI_mask(), which can use x2apic_send_IPI_all(), which may be slightly slower than the hypercall but still works correctly in such a VM. Reviewed-by: Michael Kelley Reviewed-by: Tianyu Lan Signed-off-by: Dexuan Cui Signed-off-by: Wei Liu Link: https://lore.kernel.org/r/20230824080712.30327-6-decui@microsoft.com

Drivers: hv: vmbus: Support fully enlightened TDX guests

2023-08-25T00:04:56Z

Add Hyper-V specific code so that a fully enlightened TDX guest (i.e. without the paravisor) can run on Hyper-V: Don't use hv_vp_assist_page. Use GHCI instead. Don't try to use the unsupported HV_REGISTER_CRASH_CTL. Don't trust (use) Hyper-V's TLB-flushing hypercalls. Don't use lazy EOI. Share the SynIC Event/Message pages with the hypervisor. Don't use the Hyper-V TSC page for now, because non-trivial work is required to share the page with the hypervisor. Reviewed-by: Michael Kelley Signed-off-by: Dexuan Cui Signed-off-by: Wei Liu Link: https://lore.kernel.org/r/20230824080712.30327-4-decui@microsoft.com

x86/hyperv: Support hypercalls for fully enlightened TDX guests

2023-08-25T00:04:56Z

A fully enlightened TDX guest on Hyper-V (i.e. without the paravisor) only uses the GHCI call rather than hv_hypercall_pg. Do not initialize hypercall_pg for such a guest. In hv_common_cpu_init(), the hyperv_pcpu_input_arg page needs to be decrypted in such a guest. Reviewed-by: Kuppuswamy Sathyanarayanan Reviewed-by: Michael Kelley Reviewed-by: Tianyu Lan Signed-off-by: Dexuan Cui Signed-off-by: Wei Liu Link: https://lore.kernel.org/r/20230824080712.30327-3-decui@microsoft.com