linux/drivers/hwmon, branch for-next

hwmon: (ltc2991) Fix mixed signed/unsigned in DIV_ROUND_CLOSEST

2025-01-15T21:52:43Z

Fix use of DIV_ROUND_CLOSEST where a possibly negative value is divided by an unsigned type by casting the unsigned type to the signed type of the same size (st->r_sense_uohm[channel] has type of u32). The docs on the DIV_ROUND_CLOSEST macro explain that dividing a negative value by an unsigned type is undefined behavior. The actual behavior is that it converts both values to unsigned before doing the division, for example: int ret = DIV_ROUND_CLOSEST(-100, 3U); results in ret == 1431655732 instead of -33. Fixes: 2b9ea4262ae9 ("hwmon: Add driver for ltc2991") Signed-off-by: David Lechner Link: https://lore.kernel.org/r/20250115-hwmon-ltc2991-fix-div-round-closest-v1-1-b4929667e457@baylibre.com Signed-off-by: Guenter Roeck

hwmon: (drivetemp) Set scsi command timeout to 10s

2025-01-15T14:22:13Z

There's at least one drive (MaxDigitalData OOS14000G) such that if it receives a large amount of I/O while entering an idle power state will first exit idle before responding, including causing SMART temperature requests to be delayed. This causes the drivetemp request to exceed its timeout of 1 second. Signed-off-by: Russell Harmon Link: https://lore.kernel.org/r/20250115131340.3178988-1-russ@har.mn Signed-off-by: Guenter Roeck

hwmon: (acpi_power_meter) Fix a check for the return value of read_domain_devices().

2025-01-15T14:21:19Z

After commit fabb1f813ec0 ("hwmon: (acpi_power_meter) Fix fail to load module on platform without _PMD method"), the acpi_power_meter driver fails to load if the platform has _PMD method. To address this, add a check for successful read_domain_devices(). Tested on Nvidia Grace machine. Fixes: fabb1f813ec0 ("hwmon: (acpi_power_meter) Fix fail to load module on platform without _PMD method") Signed-off-by: Kazuhiro Abe Link: https://lore.kernel.org/r/20250115073532.3211000-1-fj1078ii@aa.jp.fujitsu.com [groeck: Dropped unnecessary () from expression] Signed-off-by: Guenter Roeck

hwmon: (tmp513) Fix division of negative numbers

2025-01-14T23:42:16Z

Fix several issues with division of negative numbers in the tmp513 driver. The docs on the DIV_ROUND_CLOSEST macro explain that dividing a negative value by an unsigned type is undefined behavior. The driver was doing this in several places, i.e. data->shunt_uohms has type of u32. The actual "undefined" behavior is that it converts both values to unsigned before doing the division, for example: int ret = DIV_ROUND_CLOSEST(-100, 3U); results in ret == 1431655732 instead of -33. Furthermore the MILLI macro has a type of unsigned long. Multiplying a signed long by an unsigned long results in an unsigned long. So, we need to cast both MILLI and data data->shunt_uohms to long when using the DIV_ROUND_CLOSEST macro. Fixes: f07f9d2467f4 ("hwmon: (tmp513) Use SI constants from units.h") Fixes: 59dfa75e5d82 ("hwmon: Add driver for Texas Instruments TMP512/513 sensor chips.") Signed-off-by: David Lechner Link: https://lore.kernel.org/r/20250114-fix-si-prefix-macro-sign-bugs-v1-1-696fd8d10f00@baylibre.com [groeck: Drop some continuation lines] Signed-off-by: Guenter Roeck

hwmon: (drivetemp) Fix driver producing garbage data when SCSI errors occur

2025-01-08T00:36:01Z

scsi_execute_cmd() function can return both negative (linux codes) and positive (scsi_cmnd result field) error codes. Currently the driver just passes error codes of scsi_execute_cmd() to hwmon core, which is incorrect because hwmon only checks for negative error codes. This leads to hwmon reporting uninitialized data to userspace in case of SCSI errors (for example if the disk drive was disconnected). This patch checks scsi_execute_cmd() output and returns -EIO if it's error code is positive. Fixes: 5b46903d8bf37 ("hwmon: Driver for disk and solid state drives with temperature sensors") Signed-off-by: Daniil Stas Cc: Guenter Roeck Cc: Chris Healy Cc: Linus Walleij Cc: Martin K. Petersen Cc: Bart Van Assche Cc: linux-kernel@vger.kernel.org Cc: linux-scsi@vger.kernel.org Cc: linux-ide@vger.kernel.org Cc: linux-hwmon@vger.kernel.org Link: https://lore.kernel.org/r/20250105213618.531691-1-daniil.stas@posteo.net [groeck: Avoid inline variable declaration for portability] Signed-off-by: Guenter Roeck

hwmon: (tmp513) Fix interpretation of values of Temperature Result and Limit Registers

2024-12-16T23:58:25Z

The values returned by the driver after processing the contents of the Temperature Result and the Temperature Limit Registers do not correspond to the TMP512/TMP513 specifications. A raw register value is converted to a signed integer value by a sign extension in accordance with the algorithm provided in the specification, but due to the off-by-one error in the sign bit index, the result is incorrect. According to the TMP512 and TMP513 datasheets, the Temperature Result (08h to 0Bh) and Limit (11h to 14h) Registers are 13-bit two's complement integer values, shifted left by 3 bits. The value is scaled by 0.0625 degrees Celsius per bit. E.g., if regval = 1 1110 0111 0000 000, the output should be -25 degrees, but the driver will return +487 degrees. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 59dfa75e5d82 ("hwmon: Add driver for Texas Instruments TMP512/513 sensor chips.") Signed-off-by: Murad Masimov Link: https://lore.kernel.org/r/20241216173648.526-4-m.masimov@maxima.ru [groeck: fixed description line length] Signed-off-by: Guenter Roeck

hwmon: (tmp513) Fix Current Register value interpretation

2024-12-16T23:58:25Z

The value returned by the driver after processing the contents of the Current Register does not correspond to the TMP512/TMP513 specifications. A raw register value is converted to a signed integer value by a sign extension in accordance with the algorithm provided in the specification, but due to the off-by-one error in the sign bit index, the result is incorrect. Moreover, negative values will be reported as large positive due to missing sign extension from u32 to long. According to the TMP512 and TMP513 datasheets, the Current Register (07h) is a 16-bit two's complement integer value. E.g., if regval = 1000 0011 0000 0000, then the value must be (-32000 * lsb), but the driver will return (33536 * lsb). Fix off-by-one bug, and also cast data->curr_lsb_ua (which is of type u32) to long to prevent incorrect cast for negative values. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 59dfa75e5d82 ("hwmon: Add driver for Texas Instruments TMP512/513 sensor chips.") Signed-off-by: Murad Masimov Link: https://lore.kernel.org/r/20241216173648.526-3-m.masimov@maxima.ru [groeck: Fixed description line length] Signed-off-by: Guenter Roeck

hwmon: (tmp513) Fix interpretation of values of Shunt Voltage and Limit Registers

2024-12-16T23:58:24Z

The values returned by the driver after processing the contents of the Shunt Voltage Register and the Shunt Limit Registers do not correspond to the TMP512/TMP513 specifications. A raw register value is converted to a signed integer value by a sign extension in accordance with the algorithm provided in the specification, but due to the off-by-one error in the sign bit index, the result is incorrect. Moreover, the PGA shift calculated with the tmp51x_get_pga_shift function is relevant only to the Shunt Voltage Register, but is also applied to the Shunt Limit Registers. According to the TMP512 and TMP513 datasheets, the Shunt Voltage Register (04h) is 13 to 16 bit two's complement integer value, depending on the PGA setting. The Shunt Positive (0Ch) and Negative (0Dh) Limit Registers are 16-bit two's complement integer values. Below are some examples: * Shunt Voltage Register If PGA = 8, and regval = 1000 0011 0000 0000, then the decimal value must be -32000, but the value calculated by the driver will be 33536. * Shunt Limit Register If regval = 1000 0011 0000 0000, then the decimal value must be -32000, but the value calculated by the driver will be 768, if PGA = 1. Fix sign bit index, and also correct misleading comment describing the tmp51x_get_pga_shift function. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 59dfa75e5d82 ("hwmon: Add driver for Texas Instruments TMP512/513 sensor chips.") Signed-off-by: Murad Masimov Link: https://lore.kernel.org/r/20241216173648.526-2-m.masimov@maxima.ru [groeck: Fixed description and multi-line alignments] Signed-off-by: Guenter Roeck

module: Convert default symbol namespace to string literal

2024-12-03T16:22:25Z

Commit cdd30ebb1b9f ("module: Convert symbol namespace to string literal") only converted MODULE_IMPORT_NS() and EXPORT_SYMBOL_NS(), leaving DEFAULT_SYMBOL_NAMESPACE as a macro expansion. This commit converts DEFAULT_SYMBOL_NAMESPACE in the same way to avoid annoyance for the default namespace as well. Signed-off-by: Masahiro Yamada Reviewed-by: Uwe Kleine-König Signed-off-by: Linus Torvalds

module: Convert symbol namespace to string literal

2024-12-02T19:34:44Z

Clean up the existing export namespace code along the same lines of commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo) to __section("foo")") and for the same reason, it is not desired for the namespace argument to be a macro expansion itself. Scripted using git grep -l -e MODULE_IMPORT_NS -e EXPORT_SYMBOL_NS | while read file; do awk -i inplace ' /^#define EXPORT_SYMBOL_NS/ { gsub(/__stringify$ns$/, "ns"); print; next; } /^#define MODULE_IMPORT_NS/ { gsub(/__stringify$ns$/, "ns"); print; next; } /MODULE_IMPORT_NS/ { $0 = gensub(/MODULE_IMPORT_NS$([^)]*)$/, "MODULE_IMPORT_NS(\"\\1\")", "g"); } /EXPORT_SYMBOL_NS/ { if ($0 ~ /(EXPORT_SYMBOL_NS[^(]*)$([^,]+),/) { if ($0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)$/ && $0 !~ /(EXPORT_SYMBOL_NS[^(]*)/ && $0 !~ /^my/) { getline line; gsub(/[[:space:]]*\\$/, ""); gsub(/[[:space:]]/, "", line); $0 = $0 " " line; } $0 = gensub(/(EXPORT_SYMBOL_NS[^(]*)$([^,]+), ([^)]+)$/, "\\1(\\2, \"\\3\")", "g"); } } { print }' $file; done Requested-by: Masahiro Yamada Signed-off-by: Peter Zijlstra (Intel) Link: https://mail.google.com/mail/u/2/#inbox/FMfcgzQXKWgMmjdFwwdsfgxzKpVHWPlc Acked-by: Greg KH Signed-off-by: Linus Torvalds