linux/drivers/hwmon, branch v6.7

hwmon: (corsair-psu) Fix probe when built-in

2023-12-08T18:36:02Z

It seems that when the driver is built-in, the HID bus is initialized after the driver is loaded, which whould cause module_hid_driver() to fail. Fix this by registering the driver after the HID bus using late_initcall() in accordance with other hwmon HID drivers. Signed-off-by: Armin Wolf Link: https://lore.kernel.org/r/20231207210723.222552-1-W_Armin@gmx.de [groeck: Dropped "compile tested" comment; the patch has been tested but the tester did not provide a Tested-by: tag] Signed-off-by: Guenter Roeck

hwmon: (nzxt-kraken2) Fix error handling path in kraken2_probe()

2023-12-03T17:07:26Z

There is no point in calling hid_hw_stop() if hid_hw_start() has failed. There is no point in calling hid_hw_close() if hid_hw_open() has failed. Update the error handling path accordingly. Fixes: 82e3430dfa8c ("hwmon: add driver for NZXT Kraken X42/X52/X62/X72") Reported-by: Aleksa Savic Closes: https://lore.kernel.org/all/121470f0-6c1f-418a-844c-7ec2e8a54b8e@gmail.com/ Signed-off-by: Christophe JAILLET Reviewed-by: Jonas Malaco Link: https://lore.kernel.org/r/a768e69851a07a1f4e29f270f4e2559063f07343.1701617030.git.christophe.jaillet@wanadoo.fr Signed-off-by: Guenter Roeck

hwmon: (acpi_power_meter) Fix 4.29 MW bug

2023-12-01T04:12:28Z

The ACPI specification says: "If an error occurs while obtaining the meter reading or if the value is not available then an Integer with all bits set is returned" Since the "integer" is 32 bits in case of the ACPI power meter, userspace will get a power reading of 2^32 * 1000 miliwatts (~4.29 MW) in case of such an error. This was discovered due to a lm_sensors bugreport (https://github.com/lm-sensors/lm-sensors/issues/460). Fix this by returning -ENODATA instead. Tested-by: Fixes: de584afa5e18 ("hwmon driver for ACPI 4.0 power meters") Signed-off-by: Armin Wolf Link: https://lore.kernel.org/r/20231124182747.13956-1-W_Armin@gmx.de Signed-off-by: Guenter Roeck

hwmon: max31827: include regulator header

2023-11-14T13:32:47Z

Include `linux/regulator/consumer.h` since the driver is using `devm_regulator_get_enable` function. Signed-off-by: Antoniu Miclaus Link: https://lore.kernel.org/r/20231031091324.23991-1-antoniu.miclaus@analog.com Signed-off-by: Guenter Roeck

hwmon: ltc2991: Fix spelling mistake "contiuous" -> "continuous"

2023-11-14T13:32:47Z

There is a spelling mistake in a dev_err_probe messages. Fix it. Signed-off-by: Colin Ian King Link: https://lore.kernel.org/r/20231031084240.2148339-1-colin.i.king@gmail.com Signed-off-by: Guenter Roeck

Merge tag 'hwmon-for-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

2023-11-01T03:44:17Z

Pull hwmon updates from Guenter Roeck: "New drivers: - Driver for LTC2991 - Driver for POWER-Z Added chip / system support to existing drivers: - The ina238 driver now also supports INA237 - The asus-ec-sensors driver now supports ROG Crosshair X670E Gene - The aquacomputer_d5next now supports Aquacomputer High Flow USB and MPS Flow - The pmbus/mpq7932 driver now also supports MPQ2286 - The nct6683 now also supports ASRock X670E Taichi Various other minor improvements and fixes: - One patch series to call out is the conversion of hwmon platform drivers to use the platform remove callback returning void" * tag 'hwmon-for-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (69 commits) hwmon: (aquacomputer_d5next) Check if temp sensors of legacy devices are connected hwmon: (aquacomputer_d5next) Add support for Aquacomputer High Flow USB and MPS Flow dt-bindings: hwmon: npcm: Add npcm845 compatible string hwmon: Add driver for ltc2991 dt-bindings: hwmon: ltc2991: add bindings hwmon: (pmbus/max31785) Add delay between bus accesses hwmon: (ina238) add ina237 support dt-bindings: hwmon: ti,ina2xx: add ti,ina237 hwmon: (asus-ec-sensors) add ROG Crosshair X670E Gene. hwmon: (max31827) handle vref regulator hwmon: (ina3221) Add support for channel summation disable dt-bindings: hwmon: ina3221: Add ti,summation-disable dt-bindings: hwmon: ina3221: Convert to json-schema hwmon: (pmbus/mpq7932) Add a support for mpq2286 Power Management IC hwmon: (pmbus/core) Add helper macro to define single pmbus regulator regulator: dt-bindings: Add mps,mpq2286 power-management IC hwmon: (pmbus/mpq7932) Get page count based on chip info dt-bindings: hwmon: Add possible new properties to max31827 bindings hwmon: (max31827) Modify conversion wait time hwmon: (max31827) Make code cleaner ...

Merge tag 'acpi-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2023-11-01T01:33:26Z

Pull ACPI updates from Rafael Wysocki: "These fix issues, add new quirks, rearrange the IRQ override quirk definitions, add new helpers and switch over code to using them, rework a couple of interfaces to be more flexible, eliminate strncpy() usage from PNP, extend the ACPI PCC mailbox driver and clean up code. This is based on ACPI thermal driver changes that are present in the thermal control updates for 6.7-rc1 pull request (they are depended on by the ACPI utilities updates). However, the ACPI thermal driver changes are not included in the list of specific ACPI changes below. Specifics: - Add symbol definitions related to CDAT to the ACPICA code (Dave Jiang) - Use the acpi_device_is_present() helper in more places and rename acpi_scan_device_not_present() to be about enumeration (James Morse) - Add __printf format attribute to acpi_os_vprintf() (Su Hui) - Clean up departures from kernel coding style in the low-level interface for ACPICA (Jonathan Bergh) - Replace strncpy() with strscpy() in acpi_osi_setup() (Justin Stitt) - Fail FPDT parsing on zero length records and add proper handling for fpdt_process_subtable() to acpi_init_fpdt() (Vasily Khoruzhick) - Rework acpi_handle_list handling so as to manage it dynamically, including size computation (Rafael Wysocki) - Clean up ACPI utilities code so as to make it follow the kernel coding style (Jonathan Bergh) - Consolidate IRQ trigger-type override DMI tables and drop .ident values from dmi_system_id tables used for ACPI resources management quirks (Hans de Goede) - Add ACPI IRQ override for TongFang GMxXGxx (Werner Sembach) - Allow _DSD buffer data only for byte accessors and document the _DSD data buffer GUID (Andy Shevchenko) - Drop BayTrail and Lynxpoint pinctrl device IDs from the ACPI LPSS driver, because it does not need them (Raag Jadav) - Add acpi_backlight=vendor quirk for Toshiba Portégé R100 (Ondrej Zary) - Add "vendor" backlight quirks for 3 Lenovo x86 Android tablets (Hans de Goede) - Move Xiaomi Mi Pad 2 backlight quirk to its own section (Hans de Goede) - Annotate struct prm_module_info with __counted_by (Kees Cook) - Fix AER info corruption in aer_recover_queue() when error status data has multiple sections (Shiju Jose) - Make APEI use ERST maximum execution time for slow devices (Jeshua Smith) - Add support for platform notification handling to the PCC mailbox driver and modify it to support shared interrupts for multiple subspaces (Huisong Li) - Define common macros to use when referring to various bitfields in the PCC generic communications channel command and status fields and use them in some drivers (Sudeep Holla) - Add EC GPE detection quirk for HP 250 G7 Notebook PC (Jonathan Denose) - Fix and clean up create_pnp_modalias() and create_of_modalias() (Christophe JAILLET) - Modify 2 pieces of code to use acpi_evaluate_dsm_typed() (Andy Shevchenko) - Define acpi_dev_uid_match() for matching _UID and use it in several places (Raag Jadav) - Use acpi_device_uid() for fetching _UID in 2 places (Raag Jadav) - Add context argument to acpi_dev_install_notify_handler() (Rafael Wysocki) - Clarify ACPI bus concepts in the ACPI device enumeration documentation (Rafael Wysocki) - Switch over the ACPI AC and ACPI PAD drivers to using the platform driver interface which, is more logically consistent than binding a driver directly to an ACPI device object, and clean them up (Michal Wilczynski) - Replace strncpy() in the PNP code with either memcpy() or strscpy() as appropriate (Justin Stitt) - Clean up coding style in pnp.h (GuoHua Cheng)" * tag 'acpi-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (54 commits) ACPI: resource: Do IRQ override on TongFang GMxXGxx perf: arm_cspmu: use acpi_dev_hid_uid_match() for matching _HID and _UID ACPI: EC: Add quirk for HP 250 G7 Notebook PC ACPI: x86: use acpi_dev_uid_match() for matching _UID ACPI: utils: use acpi_dev_uid_match() for matching _UID pinctrl: intel: use acpi_dev_uid_match() for matching _UID ACPI: utils: Introduce acpi_dev_uid_match() for matching _UID ACPI: sysfs: Clean up create_pnp_modalias() and create_of_modalias() ACPI: sysfs: Fix create_pnp_modalias() and create_of_modalias() ACPI: acpi_pad: Rename ACPI device from device to adev ACPI: acpi_pad: Use dev groups for sysfs ACPI: acpi_pad: Replace acpi_driver with platform_driver ACPI: APEI: Use ERST timeout for slow devices ACPI: scan: Rename acpi_scan_device_not_present() to be about enumeration PNP: replace deprecated strncpy() with memcpy() PNP: ACPI: replace deprecated strncpy() with strscpy() perf: qcom: use acpi_device_uid() for fetching _UID ACPI: sysfs: use acpi_device_uid() for fetching _UID ACPI: scan: Use the acpi_device_is_present() helper in more places ACPI: AC: Rename ACPI device from device to adev ...

Merge tag 'hardening-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

2023-10-31T05:09:55Z

Pull hardening updates from Kees Cook: "One of the more voluminous set of changes is for adding the new __counted_by annotation[1] to gain run-time bounds checking of dynamically sized arrays with UBSan. - Add LKDTM test for stuck CPUs (Mark Rutland) - Improve LKDTM selftest behavior under UBSan (Ricardo Cañuelo) - Refactor more 1-element arrays into flexible arrays (Gustavo A. R. Silva) - Analyze and replace strlcpy and strncpy uses (Justin Stitt, Azeem Shaikh) - Convert group_info.usage to refcount_t (Elena Reshetova) - Add __counted_by annotations (Kees Cook, Gustavo A. R. Silva) - Add Kconfig fragment for basic hardening options (Kees Cook, Lukas Bulwahn) - Fix randstruct GCC plugin performance mode to stay in groups (Kees Cook) - Fix strtomem() compile-time check for small sources (Kees Cook)" * tag 'hardening-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (56 commits) hwmon: (acpi_power_meter) replace open-coded kmemdup_nul reset: Annotate struct reset_control_array with __counted_by kexec: Annotate struct crash_mem with __counted_by virtio_console: Annotate struct port_buffer with __counted_by ima: Add __counted_by for struct modsig and use struct_size() MAINTAINERS: Include stackleak paths in hardening entry string: Adjust strtomem() logic to allow for smaller sources hardening: x86: drop reference to removed config AMD_IOMMU_V2 randstruct: Fix gcc-plugin performance mode to stay in group mailbox: zynqmp: Annotate struct zynqmp_ipi_pdata with __counted_by drivers: thermal: tsens: Annotate struct tsens_priv with __counted_by irqchip/imx-intmux: Annotate struct intmux_data with __counted_by KVM: Annotate struct kvm_irq_routing_table with __counted_by virt: acrn: Annotate struct vm_memory_region_batch with __counted_by hwmon: Annotate struct gsc_hwmon_platform_data with __counted_by sparc: Annotate struct cpuinfo_tree with __counted_by isdn: kcapi: replace deprecated strncpy with strscpy_pad isdn: replace deprecated strncpy with strscpy NFS/flexfiles: Annotate struct nfs4_ff_layout_segment with __counted_by nfs41: Annotate struct nfs4_file_layout_dsaddr with __counted_by ...

Merge tag 'x86-core-2023-10-29-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2023-10-31T03:37:47Z

Pull x86 core updates from Thomas Gleixner: - Limit the hardcoded topology quirk for Hygon CPUs to those which have a model ID less than 4. The newer models have the topology CPUID leaf 0xB correctly implemented and are not affected. - Make SMT control more robust against enumeration failures SMT control was added to allow controlling SMT at boottime or runtime. The primary purpose was to provide a simple mechanism to disable SMT in the light of speculation attack vectors. It turned out that the code is sensible to enumeration failures and worked only by chance for XEN/PV. XEN/PV has no real APIC enumeration which means the primary thread mask is not set up correctly. By chance a XEN/PV boot ends up with smp_num_siblings == 2, which makes the hotplug control stay at its default value "enabled". So the mask is never evaluated. The ongoing rework of the topology evaluation caused XEN/PV to end up with smp_num_siblings == 1, which sets the SMT control to "not supported" and the empty primary thread mask causes the hotplug core to deny the bringup of the APS. Make the decision logic more robust and take 'not supported' and 'not implemented' into account for the decision whether a CPU should be booted or not. - Fake primary thread mask for XEN/PV Pretend that all XEN/PV vCPUs are primary threads, which makes the usage of the primary thread mask valid on XEN/PV. That is consistent with because all of the topology information on XEN/PV is fake or even non-existent. - Encapsulate topology information in cpuinfo_x86 Move the randomly scattered topology data into a separate data structure for readability and as a preparatory step for the topology evaluation overhaul. - Consolidate APIC ID data type to u32 It's fixed width hardware data and not randomly u16, int, unsigned long or whatever developers decided to use. - Cure the abuse of cpuinfo for persisting logical IDs. Per CPU cpuinfo is used to persist the logical package and die IDs. That's really not the right place simply because cpuinfo is subject to be reinitialized when a CPU goes through an offline/online cycle. Use separate per CPU data for the persisting to enable the further topology management rework. It will be removed once the new topology management is in place. - Provide a debug interface for inspecting topology information Useful in general and extremly helpful for validating the topology management rework in terms of correctness or "bug" compatibility. * tag 'x86-core-2023-10-29-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) x86/apic, x86/hyperv: Use u32 in hv_snp_boot_ap() too x86/cpu: Provide debug interface x86/cpu/topology: Cure the abuse of cpuinfo for persisting logical ids x86/apic: Use u32 for wakeup_secondary_cpu[_64]() x86/apic: Use u32 for [gs]et_apic_id() x86/apic: Use u32 for phys_pkg_id() x86/apic: Use u32 for cpu_present_to_apicid() x86/apic: Use u32 for check_apicid_used() x86/apic: Use u32 for APIC IDs in global data x86/apic: Use BAD_APICID consistently x86/cpu: Move cpu_l[l2]c_id into topology info x86/cpu: Move logical package and die IDs into topology info x86/cpu: Remove pointless evaluation of x86_coreid_bits x86/cpu: Move cu_id into topology info x86/cpu: Move cpu_core_id into topology info hwmon: (fam15h_power) Use topology_core_id() scsi: lpfc: Use topology_core_id() x86/cpu: Move cpu_die_id into topology info x86/cpu: Move phys_proc_id into topology info x86/cpu: Encapsulate topology information in cpuinfo_x86 ...

hwmon: (aquacomputer_d5next) Check if temp sensors of legacy devices are connected

2023-10-30T05:22:48Z

Return -ENODATA if a temp sensor of a legacy device does not contain a reading. Originally-from: Leonard Anderweit Signed-off-by: Aleksa Savic Link: https://lore.kernel.org/r/20231016083559.139341-2-savicaleksa83@gmail.com Signed-off-by: Guenter Roeck