linux/drivers/i2c, branch v4.5

i2c: brcmstb: allocate correct amount of memory for regmap

2016-03-01T18:16:45Z

We want the size of the struct, not of a pointer to it. To be future proof, just dereference the pointer to get the desired type. Fixes: dd1aa2524bc5 ("i2c: brcmstb: Add Broadcom settop SoC i2c controller driver") Acked-by: Gregory Fong Acked-by: Florian Fainelli Reviewed-by: Kamal Dasu Signed-off-by: Wolfram Sang Cc: stable@kernel.org

i2c: i801: Adding Intel Lewisburg support for iTCO

2016-02-18T12:18:48Z

Starting from Intel Sunrisepoint (Skylake PCH) the iTCO watchdog resources have been moved to reside under the i801 SMBus host controller whereas previously they were under the LPC device. This patch adds Intel lewisburg SMBus support for iTCO device. It allows to load watchdog dynamically when the hardware is present. Fixes: cdc5a3110e7c ("i2c: i801: add Intel Lewisburg device IDs") Reviewed-by: Jean Delvare Signed-off-by: Alexandra Yates Signed-off-by: Wolfram Sang Cc: stable@kernel.org

i2c: uniphier: fix typos in error messages

2016-02-12T19:23:37Z

Signed-off-by: Masahiro Yamada Signed-off-by: Wolfram Sang

i2c: omap: Fix PM regression with deferred probe for pm_runtime_reinit

2016-02-12T18:42:31Z

Commit 5de85b9d57ab ("PM / runtime: Re-init runtime PM states at probe error and driver unbind") introduced pm_runtime_reinit() that is used to reinitialize PM runtime after -EPROBE_DEFER. This allows shutting down the device after a failed probe. However, for drivers using pm_runtime_use_autosuspend() this can cause a state where suspend callback is never called after -EPROBE_DEFER. On the following device driver probe, hardware state is different from the PM runtime state causing omap_device to produce the following error: omap_device_enable() called from invalid state 1 And with omap_device and omap hardware being picky for PM, this will block any deeper idle states in hardware. The solution is to fix the drivers to follow the PM runtime documentation: 1. For sections of code that needs the device disabled, use pm_runtime_put_sync_suspend() if pm_runtime_set_autosuspend() has been set. 2. For driver exit code, use pm_runtime_dont_use_autosuspend() before pm_runtime_put_sync() if pm_runtime_use_autosuspend() has been set. Fixes: 5de85b9d57ab ("PM / runtime: Re-init runtime PM states at probe error and driver unbind") Signed-off-by: Tony Lindgren Acked-by: Ulf Hansson Signed-off-by: Wolfram Sang

i2c: piix4: don't regress on bus names

2016-01-29T10:13:52Z

The I2C bus names are supposed to be stable as they can be used by userspace to uniquely identify a specific I2C bus. So restore the original names for all legacy (pre-SB800) devices. For SB800 devices and later, improve the names. "SDA" refers to the serial data pin of each SMBus port, it's an implementation detail the user doesn't need to know. Use "port" instead, which is easier to understand. Signed-off-by: Jean Delvare Reviewed-by: Mika Westerberg Tested-by: Christian Fetzer Signed-off-by: Wolfram Sang

i2c: designware-pci: use IRQF_COND_SUSPEND flag

2016-01-26T06:00:27Z

This is effectively reapplies the commit b0898fdaffb2 ("i2c: designware-pci: use IRQF_COND_SUSPEND flag") after the commit d80d134182ba ("i2c: designware: Move common probe code into i2c_dw_probe()"). Original message as follows. The mentioned flag fixes a warning on Intel Edison board since one of the I2C controller shares IRQ line with watchdog timer. Fixes: d80d134182ba (i2c: designware: Move common probe code into i2c_dw_probe()) Signed-off-by: Andy Shevchenko Acked-by: Jarkko Nikula Signed-off-by: Wolfram Sang

i2c: piix4: Fully initialize SB800 before it is registered

2016-01-26T05:46:33Z

This closes a race window where I2C device drivers attempt to access I2C buses which aren't fully initialized yet. Signed-off-by: Jean Delvare Tested-by: Christian Fetzer Signed-off-by: Wolfram Sang

i2c: piix4: Fix SB800 locking

2016-01-26T05:46:26Z

We need a single mutex for all 4 shared SMBus ports on the SB800. A per-port mutex doesn't protect us from concurrent access. In theory the mutex should be per PCI device, however in practice we know that there's only ever a single instance of the device in a given system so we can use a global. Also take the mutex during initialization, as first port may be already in use when second port is initialized. Signed-off-by: Jean Delvare Tested-by: Christian Fetzer Reviewed-by: Mika Westerberg [wsa: made mutex static] Signed-off-by: Wolfram Sang

Merge branch 'i2c/for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

2016-01-14T19:25:37Z

Pull i2c updates from Wolfram Sang: "Quite some driver updates: - piix4 can now handle multiplexed adapters - brcmstb, xlr, eg20t, designware drivers support more SoCs - emev2 gained i2c slave support - img-scb and rcar got bigger refactoring to remove issues - lots of common driver updates i2c core changes: - new quirk flag when an adapter does not support clock stretching, so clients can be configured to avoid that if possible - added a helper function to retrieve timing parameters from firmware (with rcar being the first user) - "multi-master" DT binding added so drivers can adapt to this setting (like disabling PM to keep arbitration working) - RuntimePM for the logical adapter device is now always enabled by the core to ensure propagation from childs to the parent (the HW device) - new macro builtin_i2c_driver to reduce boilerplate" * 'i2c/for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (70 commits) i2c: create builtin_i2c_driver to avoid registration boilerplate i2c: imx: fix i2c resource leak with dma transfer dt-bindings: i2c: eeprom: add another EEPROM device dt-bindings: move I2C eeprom descriptions to the proper file i2c: designware: Do not require clock when SSCN and FFCN are provided DT: i2c: trivial-devices: Add Epson RX8010 and MPL3115 i2c: s3c2410: remove superfluous runtime PM calls i2c: always enable RuntimePM for the adapter device i2c: designware: retry transfer on transient failure i2c: ibm_iic: rename i2c_timings struct due to clash with generic version i2c: designware: Add support for AMD Seattle I2C i2c: imx: Remove unneeded comments i2c: st: use to_platform_device() i2c: designware: use to_pci_dev() i2c: brcmstb: Adding support for CM and DSL SoCs i2c: mediatek: fix i2c multi transfer issue in high speed mode i2c: imx: improve code readability i2c: imx: Improve message log when DMA is not used i2c: imx: add runtime pm support to improve the performance i2c: imx: init bus recovery info before adding i2c adapter ...

Merge branch 'acpi-soc'

2016-01-12T00:08:47Z

* acpi-soc: PM / clk: don't leave clocks enabled when driver not bound i2c: dw: Add APM X-Gene ACPI I2C device support ACPI / APD: Add APM X-Gene ACPI I2C device support ACPI / LPSS: change 'does not have' to 'has' in comment Revert "dmaengine: dw: platform: provide platform data for Intel" dmaengine: dw: return immediately from IRQ when DMA isn't in use dmaengine: dw: platform: power on device on shutdown ACPI / LPSS: override power state for LPSS DMA device ACPI / LPSS: power on when probe() and otherwise when remove() ACPI / LPSS: do delay for all LPSS devices when D3->D0 ACPI / LPSS: allow to use specific PM domain during ->probe() Revert "ACPI / LPSS: allow to use specific PM domain during ->probe()" device core: add BUS_NOTIFY_DRIVER_NOT_BOUND notification x86/platform/iosf_mbi: Remove duplicate definitions Conflicts: drivers/i2c/busses/i2c-designware-platdrv.c