linux/drivers/i2c, branch v6.3

Merge tag 'i2c-for-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

2023-04-15T18:06:49Z

Pull i2c fixes from Wolfram Sang: "Just two driver fixes" * tag 'i2c-for-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: ocores: generate stop condition after timeout in polling mode i2c: mchp-pci1xxxx: Update Timing registers

Merge tag 'devicetree-fixes-for-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2023-04-13T22:21:56Z

Pull devicetree fixes from Rob Herring: - Fix interaction between fw_devlink and DT overlays causing devices to not be probed - Fix the compatible string for loongson,cpu-interrupt-controller * tag 'devicetree-fixes-for-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: treewide: Fix probing of devices in DT overlays dt-bindings: interrupt-controller: loongarch: Fix mismatched compatible

i2c: ocores: generate stop condition after timeout in polling mode

2023-04-13T16:29:29Z

In polling mode, no stop condition is generated after a timeout. This causes SCL to remain low and thereby block the bus. If this happens during a transfer it can cause slaves to misinterpret the subsequent transfer and return wrong values. To solve this, pass the ETIMEDOUT error up from ocores_process_polling() instead of setting STATE_ERROR directly. The caller is adjusted to call ocores_process_timeout() on error both in polling and in IRQ mode, which will set STATE_ERROR and generate a stop condition. Fixes: 69c8c0c0efa8 ("i2c: ocores: add polling interface") Signed-off-by: Gregor Herburger Signed-off-by: Matthias Schiffer Acked-by: Peter Korsgaard Reviewed-by: Andrew Lunn Reviewed-by: Federico Vaga Signed-off-by: Wolfram Sang

treewide: Fix probing of devices in DT overlays

2023-04-11T19:39:52Z

When loading a DT overlay that creates a device, the device is not probed, unless the DT overlay is unloaded and reloaded again. After the recent refactoring to improve fw_devlink, it no longer depends on the "compatible" property to identify which device tree nodes will become struct devices. fw_devlink now picks up dangling consumers (consumers pointing to descendent device tree nodes of a device that aren't converted to child devices) when a device is successfully bound to a driver. See __fw_devlink_pickup_dangling_consumers(). However, during DT overlay, a device's device tree node can have sub-nodes added/removed without unbinding/rebinding the driver. This difference in behavior between the normal device instantiation and probing flow vs. the DT overlay flow has a bunch of implications that are pointed out elsewhere[1]. One of them is that the fw_devlink logic to pick up dangling consumers is never exercised. This patch solves the fw_devlink issue by marking all DT nodes added by DT overlays with FWNODE_FLAG_NOT_DEVICE (fwnode that won't become device), and by clearing the flag when a struct device is actually created for the DT node. This way, fw_devlink knows not to have consumers waiting on these newly added DT nodes, and to propagate the dependency to an ancestor DT node that has the corresponding struct device. Based on a patch by Saravana Kannan, which covered only platform and spi devices. [1] https://lore.kernel.org/r/CAGETcx_bkuFaLCiPrAWCPQz+w79ccDp6=9e881qmK=vx3hBMyg@mail.gmail.com Fixes: 4a032827daa89350 ("of: property: Simplify of_link_to_phandle()") Link: https://lore.kernel.org/r/CAGETcx_+rhHvaC_HJXGrr5_WAd2+k5f=rWYnkCZ6z5bGX-wj4w@mail.gmail.com Signed-off-by: Geert Uytterhoeven Acked-by: Mark Brown Acked-by: Wolfram Sang # for I2C Acked-by: Shawn Guo Acked-by: Saravana Kannan Tested-by: Ivan Bornyakov Link: https://lore.kernel.org/r/e1fa546682ea4c8474ff997ab6244c5e11b6f8bc.1680182615.git.geert+renesas@glider.be Signed-off-by: Rob Herring

i2c: mchp-pci1xxxx: Update Timing registers

2023-03-29T19:12:06Z

Update I2C timing registers based on latest hardware design. This fix does not break functionality of chips with older design and existing users will not be affected. Fixes: 361693697249 ("i2c: microchip: pci1xxxx: Add driver for I2C host controller in multifunction endpoint of pci1xxxx switch") Signed-off-by: Tharun Kumar P Reviewed-by: Andy Shevchenko Signed-off-by: Wolfram Sang

i2c: xgene-slimpro: Fix out-of-bounds bug in xgene_slimpro_i2c_xfer()

2023-03-16T20:15:43Z

The data->block[0] variable comes from user and is a number between 0-255. Without proper check, the variable may be very large to cause an out-of-bounds when performing memcpy in slimpro_i2c_blkwr. Fix this bug by checking the value of writelen. Fixes: f6505fbabc42 ("i2c: add SLIMpro I2C device driver on APM X-Gene platform") Signed-off-by: Wei Chen Cc: stable@vger.kernel.org Reviewed-by: Andi Shyti Signed-off-by: Wolfram Sang

i2c: hisi: Only use the completion interrupt to finish the transfer

2023-03-16T20:02:15Z

The controller will always generate a completion interrupt when the transfer is finished normally or not. Currently we use either error or completion interrupt to finish, this may result the completion interrupt unhandled and corrupt the next transfer, especially at low speed mode. Since on error case, the error interrupt will come first then is the completion interrupt. So only use the completion interrupt to finish the whole transfer process. Fixes: d62fbdb99a85 ("i2c: add support for HiSilicon I2C controller") Reported-by: Sheng Feng Signed-off-by: Sheng Feng Signed-off-by: Yicong Yang Signed-off-by: Wolfram Sang

i2c: hisi: Avoid redundant interrupts

2023-03-16T20:00:47Z

After issuing all the messages we can disable the TX_EMPTY interrupts to avoid handling redundant interrupts. For doing a sinlge bus detection (i2cdetect -y -r 0) we can reduce ~97% interrupts (before ~12000 after ~400). Signed-off-by: Sheng Feng Signed-off-by: Yicong Yang Signed-off-by: Wolfram Sang

i2c: mxs: ensure that DMA buffers are safe for DMA

2023-03-16T19:47:32Z

We found that after commit 9c46929e7989 ("ARM: implement THREAD_INFO_IN_TASK for uniprocessor systems"), the PCF85063 RTC driver stopped working on i.MX28 due to regmap_bulk_read() reading bogus data into a stack buffer. This is caused by the i2c-mxs driver using DMA transfers even for messages without the I2C_M_DMA_SAFE flag, and the aforementioned commit enabling vmapped stacks. As the MXS I2C controller requires DMA for reads of >4 bytes, DMA can't be disabled, so the issue is fixed by using i2c_get_dma_safe_msg_buf() to create a bounce buffer when needed. Fixes: 9c46929e7989 ("ARM: implement THREAD_INFO_IN_TASK for uniprocessor systems") Signed-off-by: Matthias Schiffer Signed-off-by: Wolfram Sang

i2c: imx-lpi2c: check only for enabled interrupt flags

2023-03-16T19:35:57Z

When reading from I2C, the Tx watermark is set to 0. Unfortunately the TDF (transmit data flag) is enabled when Tx FIFO entries is equal or less than watermark. So it is set in every case, hence the reset default of 1. This results in the MSR_RDF _and_ MSR_TDF flags to be set thus trying to send Tx data on a read message. Mask the IRQ status to filter for wanted flags only. Fixes: a55fa9d0e42e ("i2c: imx-lpi2c: add low power i2c bus driver") Signed-off-by: Alexander Stein Tested-by: Emanuele Ghidoli Signed-off-by: Wolfram Sang