linux/drivers/i3c, branch v6.4

i3c: ast2600: set variable ast2600_i3c_ops storage-class-specifier to static

2023-04-30T21:50:26Z

smatch reports drivers/i3c/master/ast2600-i3c-master.c:121:34: warning: symbol 'ast2600_i3c_ops' was not declared. Should it be static? This variable is only used in its defining file, so it should be static. Signed-off-by: Tom Rix Reviewed-by: Jeremy Kerr Link: https://lore.kernel.org/r/20230429134601.2688558-1-trix@redhat.com Signed-off-by: Alexandre Belloni

i3c: ast2600: fix register setting for 545 ohm pullups

2023-04-28T06:52:23Z

The 2k register setting is zero, OR-ing it in doesn't parallel the 2k and 750 ohm pullups. We need a separate value for the 545 ohm setting. Reported-by: Lukwinski Zbigniew Signed-off-by: Jeremy Kerr Link: https://lore.kernel.org/r/20230428001849.1775559-1-jk@codeconstruct.com.au Signed-off-by: Alexandre Belloni

i3c: ast2600: enable IBI support

2023-04-28T06:49:50Z

The ast2600 i3c hardware is capable of IBIs, but we need a workaround for a hardware issue with the I3C state machine handling IBI payloads of specific lengths when PEC is not enabled. To avoid this, we need to unconditionally enable PECs, at the consquence of losing a byte of data when the device does not send a PEC. Enable IBIs on the ast2600 platform, including an implementation of the PEC workaround, which prints a warning when triggered. Signed-off-by: Jeremy Kerr Reviewed-by: Joel Stanley Link: https://lore.kernel.org/r/ba923b96d6d129024c975e8a0472c5b2fcb3af32.1680161823.git.jk@codeconstruct.com.au Signed-off-by: Alexandre Belloni

i3c: dw: Add a platform facility for IBI PEC workarounds

2023-04-28T06:20:07Z

On the AST2600 i3c controller, we'll need to apply a workaround for a hardware issue with IBI payloads. Introduce a platform hook to allow dw i3c platform implementations to modify the DAT entry in IBI enable/disable to allow this workaround in a future change. Signed-off-by: Jeremy Kerr Reviewed-by: Joel Stanley Link: https://lore.kernel.org/r/d5d76a8d2336d2a71886537f42e71d51db184df6.1680161823.git.jk@codeconstruct.com.au Signed-off-by: Alexandre Belloni

i3c: dw: Add support for in-band interrupts

2023-04-28T06:20:07Z

This change adds support for receiving and dequeueing i3c IBIs. By setting struct dw_i3c_master->ibi_capable before probe, a platform implementation can select the IBI-enabled version of the i3c_master_ops, enabling the global IBI infrastrcture for that controller. Signed-off-by: Jeremy Kerr Reviewed-by: Joel Stanley Link: https://lore.kernel.org/r/79daeefd7ccb7c935d0c159149df21a6c9a73ffa.1680161823.git.jk@codeconstruct.com.au Signed-off-by: Alexandre Belloni

i3c: dw: Turn DAT array entry into a struct

2023-04-28T06:20:07Z

In an upcoming change, we will want to store additional data about the devices we have in the data address table. Change the type of the DAT entries into a struct, which currently just has the address data. Signed-off-by: Jeremy Kerr Reviewed-by: Joel Stanley Link: https://lore.kernel.org/r/9dc0d9e2857e851a0cf04819df48e5d31921f83e.1680161823.git.jk@codeconstruct.com.au Signed-off-by: Alexandre Belloni

i3c: dw: Create a generic fifo read function

2023-04-28T06:20:07Z

In a future change we'll want to read from the IBI FIFO too, so turn dw_i3c_read_rx_fifo() into a generic read with the FIFO register as a parameter. Signed-off-by: Jeremy Kerr Reviewed-by: Joel Stanley Link: https://lore.kernel.org/r/827204789583dd86addffb47ecaeab9d67cf95d5.1680161823.git.jk@codeconstruct.com.au Signed-off-by: Alexandre Belloni

i3c: Allow OF-alias-based persistent bus numbering

2023-04-28T06:19:01Z

Parse the /aliases node to assign any fixed bus numbers, as is done with the i2c subsystem. Numbering for non-aliased busses will start after the highest fixed bus number. This allows an alias node such as: aliases { i3c0 = &bus_a, i3c4 = &bus_b, }; to set the numbering for a set of i3c controllers: /* fixed-numbered bus, assigned "i3c-0" */ bus_a: i3c-master { }; /* another fixed-numbered bus, assigned "i3c-4" */ bus_b: i3c-master { }; /* dynamic-numbered bus, likely assigned "i3c-5" */ bus_c: i3c-master { }; If no i3c device aliases are present, the numbering will stay as-is, starting from 0. Signed-off-by: Jeremy Kerr Link: https://lore.kernel.org/r/20230405094149.1513209-1-jk@codeconstruct.com.au Signed-off-by: Alexandre Belloni

i3c: ast2600: Add AST2600 platform-specific driver

2023-04-28T06:19:01Z

Now that we have platform-specific infrastructure for the dw i3c driver, add platform support for the ASPEED AST2600 SoC. The AST2600 has a small set of "i3c global" registers, providing platform-level i3c configuration outside of the i3c core. For the ast2600, we need a couple of extra setup operations: - on probe: find the i3c global register set and parse the SDA pullup resistor values - on init: set the pullups accordingly, and set the i3c instance IDs Signed-off-by: Jeremy Kerr Reviewed-by: Joel Stanley Link: https://lore.kernel.org/r/20230331091501.3800299-4-jk@codeconstruct.com.au Signed-off-by: Alexandre Belloni

i3c: dw: Add infrastructure for platform-specific implementations

2023-04-28T06:18:53Z

The dw i3c core can be integrated into various SoC devices. Platforms that use this core may need a little configuration that is specific to that platform. Add some infrastructure to allow platform-specific behaviour: common probe/remove functions, a set of platform hook operations, and a pointer for platform-specific data in struct dw_i3c_master. Move the common api into a new (i3c local) header file. Platforms will provide their own struct platform_driver, which allocates struct dw_i3c_master, does any platform-specific probe behaviour, and calls into the common probe. A future change will add new platform support that uses this infrastructure. Signed-off-by: Jeremy Kerr Reviewed-by: Joel Stanley Link: https://lore.kernel.org/r/20230331091501.3800299-2-jk@codeconstruct.com.au Signed-off-by: Alexandre Belloni