linux/drivers/iio/accel/Makefile, branch master

iio: accel: bma220: add i2c module

2025-10-19T10:59:20Z

Add the bma220_i2c module. Note that this kernel module transparently shifts all register addresses 1 bit to the left, so all functions will operate based on the SPI memory map. Signed-off-by: Petre Rodan Signed-off-by: Jonathan Cameron

iio: accel: bma220: split original driver

2025-10-19T10:59:19Z

In preparation for the i2c module, move the original code into multiple source files without any other functional change. Create the additional bma220_core module which currently is not providing an abstracted bus type (this will change with the regmap patch). Fix a few includes in the context of this patch. Signed-off-by: Petre Rodan Signed-off-by: Jonathan Cameron

iio: accel: add ADXL380 driver

2024-08-03T09:13:36Z

The ADXL380/ADXL382 is a low noise density, low power, 3-axis accelerometer with selectable measurement ranges. The ADXL380 supports the +/-4 g, +/-8 g, and +/-16 g ranges, and the ADXL382 supports +/-15 g, +/-30 g and +/-60 g ranges. The ADXL380/ADXL382 offers industry leading noise, enabling precision applications with minimal calibration. The low noise, and low power ADXL380/ADXL382 enables accurate measurement in an environment with high vibration, heart sounds and audio. In addition to its low power consumption, the ADXL380/ADXL382 has many features to enable true system level performance. These include a built-in micropower temperature sensor, single / double / triple tap detection and a state machine to prevent a false triggering. In addition, the ADXL380/ADXL382 has provisions for external control of the sampling time and/or an external clock. Signed-off-by: Ramona Gradinariu Signed-off-by: Antoniu Miclaus Link: https://patch.msgid.link/20240708104114.29894-2-antoniu.miclaus@analog.com Signed-off-by: Jonathan Cameron

iio: accel: bmi088: add i2c support for bmi088 accel driver

2024-01-23T22:06:56Z

The BMI088, BMI085 and BMI090L accelerometer also support I2C protocol, so let's add the missing I2C support. The I2C interface of the {BMI085,BMI088,BMI090L} is compatible with the I2C Specification UM10204 Rev. 03 (19 June 2007), available at http://www.nxp.com. The {BMI085,BMI088,BMI090L} supports I2C standard mode and fast mode, only 7-bit address mode is supported. Datasheet: https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmi085-ds001.pdf Datasheet: https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmi088-ds001.pdf Datasheet: https://mm.digikey.com/Volume0/opasdata/d220001/medias/docus/4807/BST-BMI090L-DS000-00.pdf Signed-off-by: Jun Yan Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202312191325.jfiyeL5F-lkp@intel.com/ Link: https://lore.kernel.org/r/20231219150440.264033-1-jerrysteve1101@gmail.com Signed-off-by: Jonathan Cameron

iio: accel: Support Kionix/ROHM KX022A accelerometer

2022-11-23T19:44:03Z

KX022A is a 3-axis accelerometer from ROHM/Kionix. The sensor features include variable ODRs, I2C and SPI control, FIFO/LIFO with watermark IRQ, tap/motion detection, wake-up & back-to-sleep events, four acceleration ranges (2, 4, 8 and 16g), and probably some other cool features. Add support for the basic accelerometer features such as getting the acceleration data via IIO. (raw reads, triggered buffer [data-ready] or using the WMI IRQ). Important things to be added include the double-tap, motion detection and wake-up as well as the runtime power management. Signed-off-by: Matti Vaittinen Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/758b00d6aea0a6431a5a3a78d557d449c113b21e.1666614295.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron

iio: add MEMSensing MSA311 3-axis accelerometer driver

2022-08-30T17:35:38Z

MSA311 is a tri-axial, low-g accelerometer with I2C digital output for sensitivity consumer applications. It has dynamic user-selectable full scales range of +-2g/+-4g/+-8g/+-16g and allows acceleration measurements with output data rates from 1Hz to 1000Hz. This driver supports following MSA311 features: - IIO interface - Different power modes: NORMAL and SUSPEND (using pm_runtime) - ODR (Output Data Rate) selection - Scale and samp_freq selection - IIO triggered buffer, IIO reg access - NEW_DATA interrupt + trigger Below features to be done: - Motion Events: ACTIVE, TAP, ORIENT, FREEFALL - Low Power mode Datasheet: https://cdn-shop.adafruit.com/product-files/5309/MSA311-V1.1-ENG.pdf Signed-off-by: Dmitry Rokosov Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20220822175011.2886-4-ddrokosov@sberdevices.ru Signed-off-by: Jonathan Cameron

iio: accel: add ADXL367 driver

2022-02-21T19:33:06Z

The ADXL367 is an ultralow power, 3-axis MEMS accelerometer. The ADXL367 does not alias input signals to achieve ultralow power consumption, it samples the full bandwidth of the sensor at all data rates. Measurement ranges of +-2g, +-4g, and +-8g are available, with a resolution of 0.25mg/LSB on the +-2 g range. In addition to its ultralow power consumption, the ADXL367 has many features to enable true system level power reduction. It includes a deep multimode output FIFO, a built-in micropower temperature sensor, and an internal ADC for synchronous conversion of an additional analog input. Signed-off-by: Cosmin Tanislav Link: https://lore.kernel.org/r/20220214073810.781016-6-cosmin.tanislav@analog.com Signed-off-by: Jonathan Cameron

iio: accel: Add driver support for ADXL313

2021-09-14T11:00:35Z

ADXL313 is a small, thin, low power, 3-axis accelerometer with high resolution measurement up to +/-4g. It includes an integrated 32-level FIFO and has activity and inactivity sensing capabilities. Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADXL313.pdf Signed-off-by: Lucas Stankus Reviewed-by: Alexandru Ardelean Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/d16e2d1967e46bb2b1024b6d23bc4889da77dc6b.1630523106.git.lucas.p.stankus@gmail.com Signed-off-by: Jonathan Cameron

iio: accel: Add driver support for ADXL355

2021-09-14T11:00:30Z

ADXL355 is a 3-axis MEMS Accelerometer. It offers low noise density, low 0g offset drift, low power with selectable measurement ranges. It also features programmable high-pass and low-pass filters. Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/adxl354_adxl355.pdf Reviewed-by: Alexandru Ardelean Reviewed-by: Andy Shevchenko Signed-off-by: Puranjay Mohan Link: https://lore.kernel.org/r/20210811073027.124619-3-puranjay12@gmail.com Signed-off-by: Jonathan Cameron

iio: accel: add support for FXLS8962AF/FXLS8964AF accelerometers

2021-05-17T12:54:23Z

Add basic support for NXP FXLS8962AF/FXLS8964AF Automotive accelerometers. It will allow setting up scale/gain and reading x,y,z axis. Datasheet: https://www.nxp.com/docs/en/data-sheet/FXLS8962AF.pdf Datasheet: https://www.nxp.com/docs/en/data-sheet/FXLS8964AF.pdf Signed-off-by: Sean Nyekjaer Reviewed-by: Andy Shevchenko Signed-off-by: Jonathan Cameron