linux/drivers/infiniband/ulp/iser, branch v2.6.34

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

2010-03-30T13:02:32Z

percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo Guess-its-ok-by: Christoph Lameter Cc: Ingo Molnar Cc: Lee Schermerhorn

Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

2010-03-18T23:54:31Z

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (69 commits) [SCSI] scsi_transport_fc: Fix synchronization issue while deleting vport [SCSI] bfa: Update the driver version to 2.1.2.1. [SCSI] bfa: Remove unused header files and did some cleanup. [SCSI] bfa: Handle SCSI IO underrun case. [SCSI] bfa: FCS and include file changes. [SCSI] bfa: Modified the portstats get/clear logic [SCSI] bfa: Replace bfa_get_attr() with specific APIs [SCSI] bfa: New portlog entries for events (FIP/FLOGI/FDISC/LOGO). [SCSI] bfa: Rename pport to fcport in BFA FCS. [SCSI] bfa: IOC fixes, check for IOC down condition. [SCSI] bfa: In MSIX mode, ignore spurious RME interrupts when FCoE ports are in FW mismatch state. [SCSI] bfa: Fix Command Queue (CPE) full condition check and ack CPE interrupt. [SCSI] bfa: IOC recovery fix in fcmode. [SCSI] bfa: AEN and byte alignment fixes. [SCSI] bfa: Introduce a link notification state machine. [SCSI] bfa: Added firmware save clear feature for BFA driver. [SCSI] bfa: FCS authentication related changes. [SCSI] bfa: PCI VPD, FIP and include file changes. [SCSI] bfa: Fix to copy fpma MAC when requested by user space application. [SCSI] bfa: RPORT state machine: direct attach mode fix. ...

[SCSI] libiscsi: Make iscsi_eh_target_reset start with session reset

2010-03-03T12:09:04Z

The iscsi_eh_target_reset has been modified to attempt target reset only. If it fails, then iscsi_eh_session_reset will be called. Signed-off-by: Mike Christie Signed-off-by: Jayamohan Kallickal Signed-off-by: James Bottomley

IB/iser: Remove redundant locking from iser scsi command response flow

2010-02-24T17:41:14Z

Currently the iSER receive completion flow takes the session lock twice. Optimize it to avoid the first one by letting iser_task_rdma_finalize() be called only from the cleanup_task callback invoked by iscsi_free_task, thus reducing the contention on the session lock between the scsi command submission to the scsi command completion flows. Signed-off-by: Or Gerlitz Reviewed-by: Mike Christie Signed-off-by: Roland Dreier

IB/iser: Use libiscsi passthrough mode

2010-02-24T17:41:14Z

libiscsi passthrough mode invokes the transport xmit calls directly without first going through an internal queue, unlike the other mode, which uses a queue and a xmitworker thread. Now that the "cant_sleep" prerequisite of iscsi_host_alloc is met, move to use it. Handling xmit errors is now done by the passthrough flow of libiscsi. Since the queue/worker aren't used in this mode, the code that schedules the xmitworker is removed. Signed-off-by: Or Gerlitz Reviewed-by: Mike Christie Signed-off-by: Roland Dreier

IB/iser: Remove unnecessary connection checks

2010-02-24T17:41:13Z

Remove unnecessary checks for the IB connection state and for QP overflow, as conn state changes are reported by iSER to libiscsi and handled there. QP overflow is theoretically possible only when unsolicited data-outs are used; anyway it's being checked and handled by HW drivers. Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier

IB/iser: Use atomic allocations

2010-02-24T17:41:12Z

Two minor flows in iSER's data path still use allocations; move them to be atomic as a preperation step towards moving to use libiscsi passthrough mode. Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier

IB/iser: Simplify send flow/descriptors

2010-02-24T17:41:12Z

Simplify and shrink the logic/code used for the send descriptors. Changes include removing struct iser_dto (an unnecessary abstraction), using struct iser_regd_buf only for handling SCSI commands, using dma_sync instead of dma_map/unmap, etc. Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier

IB/iser: Use different CQ for send completions

2010-02-24T17:41:11Z

Use a different CQ for send completions, where send completions are polled by the interrupt-driven receive completion handler. Therefore, interrupts aren't used for the send CQ. Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier

IB/iser: Remove atomic counter for posted receive buffers

2010-02-24T17:41:11Z

Now that both the posting and reaping of receive buffers is done in the completion path, the counter of outstanding buffers not be atomic. Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier