linux/drivers/infiniband/ulp, branch master

Merge tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2026-04-15T01:36:10Z

Pull networking updates from Jakub Kicinski: "Core & protocols: - Support HW queue leasing, allowing containers to be granted access to HW queues for zero-copy operations and AF_XDP - Number of code moves to help the compiler with inlining. Avoid output arguments for returning drop reason where possible - Rework drop handling within qdiscs to include more metadata about the reason and dropping qdisc in the tracepoints - Remove the rtnl_lock use from IP Multicast Routing - Pack size information into the Rx Flow Steering table pointer itself. This allows making the table itself a flat array of u32s, thus making the table allocation size a power of two - Report TCP delayed ack timer information via socket diag - Add ip_local_port_step_width sysctl to allow distributing the randomly selected ports more evenly throughout the allowed space - Add support for per-route tunsrc in IPv6 segment routing - Start work of switching sockopt handling to iov_iter - Improve dynamic recvbuf sizing in MPTCP, limit burstiness and avoid buffer size drifting up - Support MSG_EOR in MPTCP - Add stp_mode attribute to the bridge driver for STP mode selection. This addresses concerns about call_usermodehelper() usage - Remove UDP-Lite support (as announced in 2023) - Remove support for building IPv6 as a module. Remove the now unnecessary function calling indirection Cross-tree stuff: - Move Michael MIC code from generic crypto into wireless, it's considered insecure but some WiFi networks still need it Netfilter: - Switch nft_fib_ipv6 module to no longer need temporary dst_entry object allocations by using fib6_lookup() + RCU. Florian W reports this gets us ~13% higher packet rate - Convert IPVS's global __ip_vs_mutex to per-net service_mutex and switch the service tables to be per-net. Convert some code that walks the service lists to use RCU instead of the service_mutex - Add more opinionated input validation to lower security exposure - Make IPVS hash tables to be per-netns and resizable Wireless: - Finished assoc frame encryption/EPPKE/802.1X-over-auth - Radar detection improvements - Add 6 GHz incumbent signal detection APIs - Multi-link support for FILS, probe response templates and client probing - New APIs and mac80211 support for NAN (Neighbor Aware Networking, aka Wi-Fi Aware) so less work must be in firmware Driver API: - Add numerical ID for devlink instances (to avoid having to create fake bus/device pairs just to have an ID). Support shared devlink instances which span multiple PFs - Add standard counters for reporting pause storm events (implement in mlx5 and fbnic) - Add configuration API for completion writeback buffering (implement in mana) - Support driver-initiated change of RSS context sizes - Support DPLL monitoring input frequency (implement in zl3073x) - Support per-port resources in devlink (implement in mlx5) Misc: - Expand the YAML spec for Netfilter Drivers - Software: - macvlan: support multicast rx for bridge ports with shared source MAC address - team: decouple receive and transmit enablement for IEEE 802.3ad LACP "independent control" - Ethernet high-speed NICs: - nVidia/Mellanox: - support high order pages in zero-copy mode (for payload coalescing) - support multiple packets in a page (for systems with 64kB pages) - Broadcom 25-400GE (bnxt): - implement XDP RSS hash metadata extraction - add software fallback for UDP GSO, lowering the IOMMU cost - Broadcom 800GE (bnge): - add link status and configuration handling - add various HW and SW statistics - Marvell/Cavium: - NPC HW block support for cn20k - Huawei (hinic3): - add mailbox / control queue - add rx VLAN offload - add driver info and link management - Ethernet NICs: - Marvell/Aquantia: - support reading SFP module info on some AQC100 cards - Realtek PCI (r8169): - add support for RTL8125cp - Realtek USB (r8152): - support for the RTL8157 5Gbit chip - add 2500baseT EEE status/configuration support - Ethernet NICs embedded and off-the-shelf IP: - Synopsys (stmmac): - cleanup and reorganize SerDes handling and PCS support - cleanup descriptor handling and per-platform data - cleanup and consolidate MDIO defines and handling - shrink driver memory use for internal structures - improve Tx IRQ coalescing - improve TCP segmentation handling - add support for Spacemit K3 - Cadence (macb): - support PHYs that have inband autoneg disabled with GEM - support IEEE 802.3az EEE - rework usrio capabilities and handling - AMD (xgbe): - improve power management for S0i3 - improve TX resilience for link-down handling - Virtual: - Google cloud vNIC: - support larger ring sizes in DQO-QPL mode - improve HW-GRO handling - support UDP GSO for DQO format - PCIe NTB: - support queue count configuration - Ethernet PHYs: - automatically disable PHY autonomous EEE if MAC is in charge - Broadcom: - add BCM84891/BCM84892 support - Micrel: - support for LAN9645X internal PHY - Realtek: - add RTL8224 pair order support - support PHY LEDs on RTL8211F-VD - support spread spectrum clocking (SSC) - Maxlinear: - add PHY-level statistics via ethtool - Ethernet switches: - Maxlinear (mxl862xx): - support for bridge offloading - support for VLANs - support driver statistics - Bluetooth: - large number of fixes and new device IDs - Mediatek: - support MT6639 (MT7927) - support MT7902 SDIO - WiFi: - Intel (iwlwifi): - UNII-9 and continuing UHR work - MediaTek (mt76): - mt7996/mt7925 MLO fixes/improvements - mt7996 NPU support (HW eth/wifi traffic offload) - Qualcomm (ath12k): - monitor mode support on IPQ5332 - basic hwmon temperature reporting - support IPQ5424 - Realtek: - add USB RX aggregation to improve performance - add USB TX flow control by tracking in-flight URBs - Cellular: - IPA v5.2 support" * tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1561 commits) net: pse-pd: fix kernel-doc function name for pse_control_find_by_id() wireguard: device: use exit_rtnl callback instead of manual rtnl_lock in pre_exit wireguard: allowedips: remove redundant space tools: ynl: add sample for wireguard wireguard: allowedips: Use kfree_rcu() instead of call_rcu() MAINTAINERS: Add netkit selftest files selftests/net: Add additional test coverage in nk_qlease selftests/net: Split netdevsim tests from HW tests in nk_qlease tools/ynl: Make YnlFamily closeable as a context manager net: airoha: Add missing PPE configurations in airoha_ppe_hw_init() net: airoha: Fix VIP configuration for AN7583 SoC net: caif: clear client service pointer on teardown net: strparser: fix skb_head leak in strp_abort_strp() net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete() selftests/bpf: add test for xdp_master_redirect with bond not up net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master net: airoha: Remove PCE_MC_EN_MASK bit in REG_FE_PCE_CFG configuration sctp: disable BH before calling udp_tunnel_xmit_skb() sctp: fix missing encap_port propagation for GSO fragments net: airoha: Rely on net_device pointer in ETS callbacks ...

kernfs: pass struct ns_common instead of const void * for namespace tags

2026-04-09T12:36:52Z

kernfs has historically used const void * to pass around namespace tags used for directory-level namespace filtering. The only current user of this is sysfs network namespace tagging where struct net pointers are cast to void *. Replace all const void * namespace parameters with const struct ns_common * throughout the kernfs, sysfs, and kobject namespace layers. This includes the kobj_ns_type_operations callbacks, kobject_namespace(), and all sysfs/kernfs APIs that accept or return namespace tags. Passing struct ns_common is needed because various codepaths require access to the underlying namespace. A struct ns_common can always be converted back to the concrete namespace type (e.g., struct net) via container_of() or to_ns_common() in the reverse direction. This is a preparatory change for switching to ns_id-based directory iteration to prevent a KASLR pointer leak through the current use of raw namespace pointers as hash seeds and comparison keys. Signed-off-by: Christian Brauner

ipv6: convert CONFIG_IPV6 to built-in only and clean up Kconfigs

2026-03-29T18:21:22Z

Maintaining a modular IPv6 stack offers image size savings for specific setups, this benefit is outweighed by the architectural burden it imposes on the subsystems on implementation and maintenance. Therefore, drop it. Change CONFIG_IPV6 from tristate to bool. Remove all Kconfig dependencies across the tree that explicitly checked for IPV6=m. In addition, remove MODULE_DESCRIPTION(), MODULE_ALIAS(), MODULE_AUTHOR() and MODULE_LICENSE(). This is also replacing module_init() by device_initcall(). It is not possible to use fs_initcall() as IPv4 does because that creates a race condition on IPv6 addrconf. Finally, modify the default configs from CONFIG_IPV6=m to CONFIG_IPV6=y except for m68k as according to the bloat-o-meter the image is increasing by 330KB~ and that isn't acceptable. Instead, disable IPv6 on this architecture by default. This is aligned with m68k RAM requirements and recommendations [1]. [1] http://www.linux-m68k.org/faq/ram.html Signed-off-by: Fernando Fernandez Mancera Tested-by: Ricardo B. Marlière Acked-by: Krzysztof Kozlowski # arm64 Link: https://patch.msgid.link/20260325120928.15848-2-fmancera@suse.de Signed-off-by: Jakub Kicinski

Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses

2026-02-22T16:26:33Z

Conversion performed via this Coccinelle script: // SPDX-License-Identifier: GPL-2.0-only // Options: --include-headers-for-types --all-includes --include-headers --keep-comments virtual patch @gfp depends on patch && !(file in "tools") && !(file in "samples")@ identifier ALLOC = {kmalloc_obj,kmalloc_objs,kmalloc_flex, kzalloc_obj,kzalloc_objs,kzalloc_flex, kvmalloc_obj,kvmalloc_objs,kvmalloc_flex, kvzalloc_obj,kvzalloc_objs,kvzalloc_flex}; @@ ALLOC(... - , GFP_KERNEL ) $ make coccicheck MODE=patch COCCI=gfp.cocci Build and boot tested x86_64 with Fedora 42's GCC and Clang: Linux version 6.19.0+ (user@host) (gcc (GCC) 15.2.1 20260123 (Red Hat 15.2.1-7), GNU ld version 2.44-12.fc42) #1 SMP PREEMPT_DYNAMIC 1970-01-01 Linux version 6.19.0+ (user@host) (clang version 20.1.8 (Fedora 20.1.8-4.fc42), LLD 20.1.8) #1 SMP PREEMPT_DYNAMIC 1970-01-01 Signed-off-by: Kees Cook Signed-off-by: Linus Torvalds

Convert more 'alloc_obj' cases to default GFP_KERNEL arguments

2026-02-22T04:03:00Z

This converts some of the visually simpler cases that have been split over multiple lines. I only did the ones that are easy to verify the resulting diff by having just that final GFP_KERNEL argument on the next line. Somebody should probably do a proper coccinelle script for this, but for me the trivial script actually resulted in an assertion failure in the middle of the script. I probably had made it a bit _too_ trivial. So after fighting that far a while I decided to just do some of the syntactically simpler cases with variations of the previous 'sed' scripts. The more syntactically complex multi-line cases would mostly really want whitespace cleanup anyway. Signed-off-by: Linus Torvalds

Convert 'alloc_flex' family to use the new default GFP_KERNEL argument

2026-02-22T01:09:51Z

This is the exact same thing as the 'alloc_obj()' version, only much smaller because there are a lot fewer users of the *alloc_flex() interface. As with alloc_obj() version, this was done entirely with mindless brute force, using the same script, except using 'flex' in the pattern rather than 'objs*'. Signed-off-by: Linus Torvalds

Convert 'alloc_obj' family to use the new default GFP_KERNEL argument

2026-02-22T01:09:51Z

This was done entirely with mindless brute force, using git grep -l '\

treewide: Replace kmalloc with kmalloc_obj for non-scalar types

2026-02-21T09:02:28Z

This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

2026-02-13T01:05:20Z

Pull rdma updates from Jason Gunthorpe: "Usual smallish cycle. The NFS biovec work to push it down into RDMA instead of indirecting through a scatterlist is pretty nice to see, been talked about for a long time now. - Various code improvements in irdma, rtrs, qedr, ocrdma, irdma, rxe - Small driver improvements and minor bug fixes to hns, mlx5, rxe, mana, mlx5, irdma - Robusness improvements in completion processing for EFA - New query_port_speed() verb to move past limited IBA defined speed steps - Support for SG_GAPS in rts and many other small improvements - Rare list corruption fix in iwcm - Better support different page sizes in rxe - Device memory support for mana - Direct bio vec to kernel MR for use by NFS-RDMA - QP rate limiting for bnxt_re - Remote triggerable NULL pointer crash in siw - DMA-buf exporter support for RDMA mmaps like doorbells" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (66 commits) RDMA/mlx5: Implement DMABUF export ops RDMA/uverbs: Add DMABUF object type and operations RDMA/uverbs: Support external FD uobjects RDMA/siw: Fix potential NULL pointer dereference in header processing RDMA/umad: Reject negative data_len in ib_umad_write IB/core: Extend rate limit support for RC QPs RDMA/mlx5: Support rate limit only for Raw Packet QP RDMA/bnxt_re: Report QP rate limit in debugfs RDMA/bnxt_re: Report packet pacing capabilities when querying device RDMA/bnxt_re: Add support for QP rate limiting MAINTAINERS: Drop RDMA files from Hyper-V section RDMA/uverbs: Add __GFP_NOWARN to ib_uverbs_unmarshall_recv() kmalloc svcrdma: use bvec-based RDMA read/write API RDMA/core: add rdma_rw_max_sge() helper for SQ sizing RDMA/core: add MR support for bvec-based RDMA operations RDMA/core: use IOVA-based DMA mapping for bvec RDMA operations RDMA/core: add bio_vec based RDMA read/write API RDMA/irdma: Use kvzalloc for paged memory DMA address array RDMA/rxe: Fix race condition in QP timer handlers RDMA/mana_ib: Add device‑memory support ...

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2026-02-12T23:43:02Z

Pull SCSI updates from James Bottomley: "Usual driver updates (qla2xxx, mpi3mr, mpt3sas, ufs) plus assorted cleanups and fixes. The biggest core change is the massive code motion in the sd driver to remove forward declarations and the most significant change is to enumify the queuecommand return" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (78 commits) scsi: csiostor: Fix dereference of null pointer rn scsi: buslogic: Reduce stack usage scsi: ufs: host: mediatek: Require CONFIG_PM scsi: ufs: mediatek: Fix page faults in ufs_mtk_clk_scale() trace event scsi: smartpqi: Fix memory leak in pqi_report_phys_luns() scsi: mpi3mr: Make driver probing asynchronous scsi: ufs: core: Flush exception handling work when RPM level is zero scsi: efct: Use IRQF_ONESHOT and default primary handler scsi: ufs: core: Use a host-wide tagset in SDB mode scsi: qla2xxx: target: Add WQ_PERCPU to alloc_workqueue() users scsi: qla2xxx: Add WQ_PERCPU to alloc_workqueue() users scsi: qla4xxx: Add WQ_PERCPU to alloc_workqueue() users scsi: mpi3mr: Driver version update to 8.17.0.3.50 scsi: mpi3mr: Fixed the W=1 compilation warning scsi: mpi3mr: Record and report controller firmware faults scsi: mpi3mr: Update MPI Headers to revision 39 scsi: mpi3mr: Use negotiated link rate from DevicePage0 scsi: mpi3mr: Avoid redundant diag-fault resets scsi: mpi3mr: Rename log data save helper to reflect threaded/BH context scsi: mpi3mr: Add module parameter to control threaded IRQ polling ...