linux/drivers/input/keyboard, branch v5.12

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2021-04-15T17:23:44Z

Pull input fixes from Dmitry Torokhov: "Just a few driver fixes here" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elants_i2c - drop zero-checking of ABS_MT_TOUCH_MAJOR resolution Input: elants_i2c - fix division by zero if firmware reports zero phys size Input: nspire-keypad - enable interrupts only when opened Input: i8042 - fix Pegatron C15B ID entry Input: n64joy - fix return value check in n64joy_probe() Input: s6sy761 - fix coordinate read bit shift

Input: nspire-keypad - enable interrupts only when opened

2021-03-23T17:55:10Z

The driver registers an interrupt handler in _probe, but didn't configure them until later when the _open function is called. In between, the keypad can fire an IRQ due to touchpad activity, which the handler ignores. This causes the kernel to disable the interrupt, blocking the keypad from working. Fix this by disabling interrupts before registering the handler. Additionally, disable them in _close, so that they're only enabled while open. Fixes: fc4f31461892 ("Input: add TI-Nspire keypad support") Signed-off-by: Fabian Vogt Link: https://lore.kernel.org/r/3383725.iizBOSrK1V@linux-e202.suse.de Signed-off-by: Dmitry Torokhov

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2021-02-23T22:56:23Z

Pull input updates from Dmitry Torokhov: "Mostly existing driver fixes plus a new driver for game controllers directly connected to Nintendo 64, and an enhancement for keyboards driven by Chrome OS EC to communicate layout of the top row to userspace" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (47 commits) Input: st1232 - fix NORMAL vs. IDLE state handling Input: aiptek - convert sysfs sprintf/snprintf family to sysfs_emit Input: alps - fix spelling of "positive" ARM: dts: cros-ec-keyboard: Use keymap macros dt-bindings: input: Fix the keymap for LOCK key dt-bindings: input: Create macros for cros-ec keymap Input: cros-ec-keyb - expose function row physical map to userspace dt-bindings: input: cros-ec-keyb: Add a new property describing top row Input: applespi - fix occasional crc errors under load. Input: applespi - don't wait for responses to commands indefinitely. Input: st1232 - add IDLE state as ready condition Input: zinitix - fix return type of zinitix_init_touch() Input: i8042 - add ASUS Zenbook Flip to noselftest list Input: add missing dependencies on CONFIG_HAS_IOMEM Input: joydev - prevent potential read overflow in ioctl Input: elo - fix an error code in elo_connect() Input: xpad - add support for PowerA Enhanced Wired Controller for Xbox Series X|S Input: sur40 - fix an error code in sur40_probe() Input: elants_i2c - detect enum overflow Input: zinitix - remove unneeded semicolon ...

Input: cros-ec-keyb - expose function row physical map to userspace

2021-02-23T05:22:15Z

The top-row keys in a keyboard usually have dual functionalities. E.g. A function key "F1" is also an action key "Browser back". Therefore, when an application receives an action key code from a top-row key press, the application needs to know how to correlate the action key code with the function key code and do the conversion whenever necessary. Since the userpace already knows the key scanlines (row/column) associated with a received key code. Essentially, the userspace only needs a mapping between the key row/column and the matching physical location in the top row. So, enhance the cros-ec-keyb driver to create such a mapping and expose it to userspace in the form of a function_row_physmap attribute. The attribute would be a space separated ordered list of row/column codes for the keys in the function row, in a left-to-right order. The attribute will only be present when the device has a custom design for the top-row keys. Signed-off-by: Philip Chen Reviewed-by: Stephen Boyd Link: https://lore.kernel.org/r/20210115122412.v7.2.I6542d7d9d0b246e7079bb16b41e697b2ac4b4e39@changeid Signed-off-by: Dmitry Torokhov

Merge tag 'v5.11' into next

2021-02-23T05:21:03Z

Merge with mainline to get latest APIs and device tree bindings.

Input: applespi - fix occasional crc errors under load.

2021-02-19T19:13:29Z

For some reason, when the system is under heavy CPU load, the read following the write sometimes occurs unusually quickly, resulting in the read data not being quite ready and hence a bad packet getting read. Adding another delay after reading the status message appears to fix this. Signed-off-by: Ronald Tschalär Link: https://lore.kernel.org/r/20210217190718.11035-2-ronald@innovation.ch Signed-off-by: Dmitry Torokhov

Input: applespi - don't wait for responses to commands indefinitely.

2021-02-19T19:13:27Z

The response to a command may never arrive or it may be corrupted (and hence dropped) for some reason. While exceedingly rare, when it did happen it blocked all further commands. One way to fix this was to do a suspend/resume. However, recovering automatically seems like a nicer option. Hence this puts a time limit (1 sec) on how long we're willing to wait for a response, after which we assume it got lost. Signed-off-by: Ronald Tschalär Link: https://lore.kernel.org/r/20210217190718.11035-1-ronald@innovation.ch Signed-off-by: Dmitry Torokhov

Input: add missing dependencies on CONFIG_HAS_IOMEM

2021-02-19T19:02:18Z

devm_ioremap_resource() is only guaranteed to be present if CONFIG_HAS_IOMEM is set. Reported-by: kernel test robot Link: https://lore.kernel.org/r/YCyauGyqxut69JNz@google.com Signed-off-by: Dmitry Torokhov

ARM: 9049/1: locomo: make locomo bus's remove callback return void

2021-02-01T19:44:30Z

The driver core ignores the return value of struct bus_type::remove because there is only little that can be done. To simplify the quest to make this function return void, let struct locomo_driver::remove return void, too. All users already unconditionally return 0, this commit makes it obvious that returning an error code is a bad idea and ensures future users behave accordingly. Link: https://lore.kernel.org/r/20201126110140.2021758-1-u.kleine-koenig@pengutronix.de Acked-by: Dmitry Torokhov Acked-by: Lee Jones Signed-off-by: Uwe Kleine-König Signed-off-by: Russell King

Input: omap4-keypad - implement errata check for lost key-up events

2021-01-11T06:23:04Z

We are still missing handling for errata i689 related issues for the case where we never see a key up interrupt for the last pressed key. To fix the issue, we must scan the key state again after the keyboard controller has idled to check if a key up event was missed. This is described in the omap4 silicon errata documentation for Errata ID i689 "1.32 Keyboard Key Up Event Can Be Missed": "When a key is released for a time shorter than the debounce time, in-between 2 key press (KP1 and KP2), the keyboard state machine will go to idle mode and will never detect the key release (after KP1, and also after KP2), and thus will never generate a new IRQ indicating the key release." We can use PM runtime autosuspend features to check the keyboard state after it enters idle. Signed-off-by: Tony Lindgren Link: https://lore.kernel.org/r/X/vrygoBxzGyXhfc@atomide.com Signed-off-by: Dmitry Torokhov