linux/drivers/input/misc/Kconfig, branch v4.8

Input: add powerkey driver for HISI 65xx SoC

2016-06-23T20:45:54Z

This driver provides a input driver for the power button on the HiSi 65xx SoC for boards like HiKey. This driver was originally by Zhiliang Xue then basically rewritten by Jorge, but preserving the original module author credits. Signed-off-by: Jorge Ramirez-Ortiz [jstultz: Reworked commit message, folded in other fixes/cleanups from Jorge, implemented some larger cleanups suggested by DmitryT] Signed-off-by: John Stultz Signed-off-by: Dmitry Torokhov

Input: atmel_captouch - add dependence on i2c

2016-05-19T16:35:14Z

The newly added Atmal captouch driver fails to build when CONFIG_I2C is disabled: drivers/input/misc/atmel_captouch.c: In function 'atmel_read': drivers/input/misc/atmel_captouch.c:115:8: error: implicit declaration of function 'i2c_transfer' [-Werror=implicit-function-declaration] This adds an explicit Kconfig dependency to prevent the broken configuration. Signed-off-by: Arnd Bergmann Fixes: b06d43f7a3db ("Input: add Atmel Captouch Button driver") Signed-off-by: Dmitry Torokhov

Input: add Atmel Captouch Button driver

2016-05-18T22:08:19Z

Add I2C driver for Atmel Capacitive Touch Button device. Signed-off-by: Hung-yu Wu Signed-off-by: Grant Grundler Acked-by: Rob Herring Signed-off-by: Dmitry Torokhov

Input: sirfsoc-onkey - allow modular build

2016-01-27T23:55:14Z

CONFIG_INPUT may itself be a loadable module, but the sirf power key driver is listed as 'bool', which makes it possible to select a broken configuration with the driver built-in but the subsystem not loaded. In this configuration, we get a link error: drivers/input/built-in.o: In function `sirfsoc_pwrc_isr': drivers/input/misc/sirfsoc-onkey.c:63: undefined reference to `input_event' drivers/input/built-in.o: In function `sirfsoc_pwrc_isr': include/linux/input.h:414: undefined reference to `input_event' drivers/input/built-in.o: In function `sirfsoc_pwrc_probe': drivers/input/misc/sirfsoc-onkey.c:132: undefined reference to `devm_input_allocate_device' drivers/input/misc/sirfsoc-onkey.c:139: undefined reference to `input_set_capability' drivers/input/misc/sirfsoc-onkey.c:161: undefined reference to `input_register_device' drivers/input/built-in.o: In function `sirfsoc_pwrc_report_event': drivers/input/misc/sirfsoc-onkey.c:48: undefined reference to `input_event' drivers/input/built-in.o: In function `sirfsoc_pwrc_report_event': include/linux/input.h:414: undefined reference to `input_event' drivers/input/built-in.o:(.debug_addr+0x24): undefined reference to `input_event' drivers/input/built-in.o:(.debug_addr+0xbc): undefined reference to `devm_input_allocate_device' drivers/input/built-in.o:(.debug_addr+0x104): undefined reference to `input_set_capability' drivers/input/built-in.o:(.debug_addr+0x128): undefined reference to `input_register_device' This marks the driver as 'tristate' so it becomes possible to have it in a loadable module, mainly to help with randconfig builds. We also have to add a missing semicolon here, which ended up not being needed in built-in mode because the following MODULE_DEVICE_TABLE is an empty macro followed by another semicolon then. Signed-off-by: Arnd Bergmann Signed-off-by: Dmitry Torokhov

Input: e3x0-button - update Kconfig description

2015-10-26T08:39:07Z

The driver is now used for the entire USRP e3xx series, this commit fixes the description that will be displayed in the menu accordingly. Signed-off-by: Moritz Fischer Signed-off-by: Dmitry Torokhov

Input: add DA9062 OnKey capability to DA9063 OnKey driver

2015-09-29T23:50:07Z

Add DA9062 OnKey support into the existing DA9063 OnKey driver component by using generic access tables for common register and bit mask definitions. The following change will add generic register and bit mask support to the DA9063 OnKey. The following alterations have been made to the DA9063 OnKey: - Addition of a da906x_chip_config structure to hold all generic registers and bitmasks for this type of OnKey component. - Addition of an struct of_device_id table for DA9063 and DA9062 defaults - Refactoring functions to use struct da9063_onkey accesses to generic registers/masks instead of using defines from registers.h - Re-work of da9063_onkey_probe() to use of_match_node() and dev_get_regmap() to provide initialisation of generic registers and masks and access to regmap Signed-off-by: Steve Twiss Signed-off-by: Dmitry Torokhov

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2015-09-04T19:02:11Z

Pull input subsystem updates from Dmitry Torokhov: "Drivers, drivers, drivers... No interesting input core changes this time" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (74 commits) Input: elan_i2c - use iap_version to get firmware information Input: max8997_haptic - fix module alias Input: elan_i2c - fix typos for validpage_count Input: psmouse - add small delay for IBM trackpoint pass-through mode Input: synaptics - fix handling of disabling gesture mode Input: elan_i2c - enable ELAN0100 acpi panels Input: gpio-keys - report error when disabling unsupported key Input: sur40 - fix error return code Input: sentelic - silence some underflow warnings Input: zhenhua - switch to using bitrev8() Input: cros_ec_keyb - replace KEYBOARD_CROS_EC dependency Input: cap11xx - add LED support Input: elants_i2c - fix for devm_gpiod_get API change Input: elan_i2c - enable asynchronous probing Input: elants_i2c - enable asynchronous probing Input: elants_i2c - wire up regulator support Input: do not emit unneeded EV_SYN when suspending Input: elants_i2c - disable idle mode before updating firmware MAINTAINERS: Add maintainer for atmel_mxt_ts Input: atmel_mxt_ts - remove warning on zero T44 count ...

Input: Remove the max77843 haptic driver

2015-08-07T13:57:25Z

The max77693 haptic driver supports Maxim 77843 device so remove the max77843 driver. Signed-off-by: Krzysztof Kozlowski Acked-by: Dmitry Torokhov Signed-off-by: Mark Brown

Input: max77693: Add support for Maxim 77843

2015-08-07T13:57:25Z

The Maxim 77843 haptic driver differs from 77693 by: 1. Setting the bias. 2. Different configuration register. 3. Not enabling the low-sys DAC. 4. Using same regmap for PMIC and haptic blocks. Incorporate all differences into max77693 haptic driver so both devices can be supported. Signed-off-by: Krzysztof Kozlowski Acked-by: Dmitry Torokhov Signed-off-by: Mark Brown

Input: Allow compile test of GPIO consumers if !GPIOLIB

2015-08-04T18:45:45Z

The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer functionality only, can still be compiled if GPIOLIB is not enabled. Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where appropriate. Signed-off-by: Geert Uytterhoeven Acked-by: Linus Walleij Signed-off-by: Dmitry Torokhov