linux/drivers/input/misc/Makefile, branch v2.6.30

Input: arrange drivers/input/misc/Makefile in alphabetical order

2009-03-10T03:15:42Z

Everyone adds their driver to the end of the list, hopefully if it is in alphabetical order new drivers will spread out a bit and I can merge them more easily. Signed-off-by: Dmitry Torokhov

Input: add driver for S1 button of rb532

2009-03-10T03:10:12Z

Mikrotik's Routerboard 532 has two builtin buttons, from which one triggers a hardware reset. The other one is accessible through GPIO pin 1. Sadly, this pin is being multiplexed with UART0 input, so enabling it as interrupt source (as implied by the gpio-keys driver) is not possible unless UART0 has been turned off. The later one though is a rather bad idea as the Routerboard is an embedded device with only a single serial port, so it's almost always used as serial console device. This patch adds a driver based on INPUT_POLLDEV, which disables the UART and reconfigures GPIO pin 1 temporarily while reading the button state. This procedure works fine and has been tested as part of another, unpublished driver for this device. Signed-off-by: Phil Sutter Signed-off-by: Dmitry Torokhov

Input: generic driver for rotary encoders on GPIOs

2009-03-08T23:35:53Z

This patch adds a generic driver for rotary encoders connected to GPIO pins of a system. It relies on gpiolib and generic hardware irqs. The documentation that also comes with this patch explains the concept and how to use the driver. Signed-off-by: Daniel Mack Tested-by: H Hartley Sweeten Signed-off-by: Dmitry Torokhov

input: PCF50633 input driver

2009-01-11T00:34:25Z

Signed-off-by: Balaji Rao Cc: Andy Green Cc: Dmitry Torokhov Acked-by: Dmitry Torokhov Signed-off-by: Samuel Ortiz

Input: add driver for USB VoIP phones with CM109 chipset

2008-08-08T15:54:03Z

Signed-off-by: Alfred E. Heggestad Signed-off-by: Dmitry Torokhov

Input: sgi_btns - add support for SGI Indy volume buttons

2008-07-19T04:50:39Z

Also rename sgio2_btns to sgi_btns since the driver is not only for SGI O2 anymore. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Dmitry Torokhov

Input: new driver for SGI O2 volume buttons

2008-07-07T13:08:07Z

This driver adds support for the volume buttons on the front of every SGI O2 workstation. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Dmitry Torokhov

Input: add driver for Fujitsu application buttons

2008-01-21T06:11:07Z

This driver supports the application buttons on some Fujitsu Lifebook laptops. It is based on the earlier apanel driver done by Jochen Eisenger, but with many changes. The original driver used ioctl's and a separate user space program (see http://apanel.sourceforge.net). This driver hooks into the input subsystem so that the normal keys act as expected without a daemon. In addition to buttons, the Mail Led is handled via LEDs class device. The driver now supports redefinable keymaps and no longer has to have a DMI table for all Fujitsu laptops. I thought about mixing this driver should be integrated into the Fujitsu laptop extras driver that handles backlight, but rejected the idea because it wasn't clear if all the Fujitsu laptops supported both. Signed-off-by: Stephen Hemminger Signed-off-by: Dmitry Torokhov

Input: move input-polldev to drivers/input

2007-06-13T05:49:58Z

To work around deficiences in Kconfig that allows to "select" a symbol without automatically selecting all dependencies for that symbol move input-polldev from drivers/input/misc to drivers/input thus removing extra dependency on CONFIG_INPUT_MISC. Signed-off-by: Dmitry Torokhov

Input: move USB miscellaneous devices under drivers/input/misc

2007-05-08T05:41:29Z

This will allow concentrating all input devices in one place in {menu|x|q}config. Signed-off-by: Dmitry Torokhov Acked-by: Greg Kroah-Hartman