linux/drivers/input/misc, branch v5.10

Input: cm109 - do not stomp on control URB

2020-12-11T21:17:36Z

We need to make sure we are not stomping on the control URB that was issued when opening the device when attempting to toggle buzzer. To do that we need to mark it as pending in cm109_open(). Reported-and-tested-by: syzbot+150f793ac5bc18eee150@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov

Input: soc_button_array - add Lenovo Yoga Tablet2 1051L to the dmi_use_low_level_irq list

2020-12-07T06:12:43Z

Add the Lenovo Yoga Tablet2 1051L to the list of devices where the ACPI AML code is poking the GPIO config register directly changing the IRQ type to a low_level_irq, which we need to work around. This fixes the home button on the Lenovo Yoga Tablet2 1051L not working. Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20201206161245.24798-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov

Input: soc_button_array - add missing include

2020-11-25T01:48:43Z

This fixes the following build errors: CC [M] drivers/input/misc/soc_button_array.o drivers/input/misc/soc_button_array.c:156:4: error: implicit declaration of function 'irq_set_irq_type' [-Werror,-Wimplicit-function-declaration] irq_set_irq_type(irq, IRQ_TYPE_LEVEL_LOW); ^ drivers/input/misc/soc_button_array.c:156:26: error: use of undeclared identifier 'IRQ_TYPE_LEVEL_LOW' irq_set_irq_type(irq, IRQ_TYPE_LEVEL_LOW); ^ 2 errors generated. Fixes: 78a5b53e9fb4 ("Input: soc_button_array - work around DSDTs which modify the irqflags") Reported-by: kernel test robot Reviewed-by: Hans de Goede Link: https://lore.kernel.org/r/20201123061508.GA1009828@dtor-ws Signed-off-by: Dmitry Torokhov

Input: adxl34x - clean up a data type in adxl34x_probe()

2020-10-27T03:56:27Z

The "revid" is used to store negative error codes so it should be an int type. Fixes: e27c729219ad ("Input: add driver for ADXL345/346 Digital Accelerometers") Signed-off-by: Dan Carpenter Acked-by: Michael Hennerich Link: https://lore.kernel.org/r/20201026072824.GA1620546@mwanda Signed-off-by: Dmitry Torokhov

Input: soc_button_array - work around DSDTs which modify the irqflags

2020-09-14T06:08:48Z

Some 2-in-1s which use the soc_button_array driver have this ugly issue in their DSDT where the _LID method modifies the irq-type settings of the GPIOs used for the power and home buttons. The intend of this AML code is to disable these buttons when the lid is closed. The AML does this by directly poking the GPIO controllers registers. This is problematic because when re-enabling the irq, which happens whenever _LID gets called with the lid open (e.g. on boot and on resume), it sets the irq-type to IRQ_TYPE_LEVEL_LOW. Where as the gpio-keys driver programs the type to, and expects it to be, IRQ_TYPE_EDGE_BOTH. This commit adds a workaround for this which (on affected devices) does not set gpio_keys_button.gpio on these 2-in-1s, instead it gets the irq for the GPIO, configures it as IRQ_TYPE_LEVEL_LOW (to match how the _LID AML code configures it) and passes the irq in gpio_keys_button.irq. Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20200906122016.4628-2-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov

Input: soc_button_array - add support for INT33D3 tablet-mode switch devices

2020-09-14T06:08:47Z

According to the Microsoft documentation for Windows 8 convertible devices, these devices should implement a PNP0C60 "laptop/slate mode state indicator" ACPI device. This device can work in 2 ways, if there is a GPIO which directly indicates the device is in tablet-mode or not then the direct-gpio mode should be used. If there is no such GPIO, but instead the events are coming from e.g. the embedded-controller, then there should still be a PNP0C60 ACPI device and event-injection should be used to send the events. The drivers/platform/x86/intel-vbtn.c code is an example from a standardized manner of doing the latter. On various 2-in-1s with either a detachable keyboard, or with 360° hinges, the direct GPIO mode is indicated by an ACPI device with a HID of INT33D3, which contains a single GpioInt in its ACPI resource table, which directly indicates if the device is in tablet-mode or not. This commit adds support for this to the soc_button_array code, as well as for the alternative ID9001 HID which some devices use instead of the INT33D3 HID. Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20200826150601.12137-3-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov

Input: soc_button_array - add active_low setting to soc_button_info

2020-09-14T06:08:46Z

This is a preparation patch for adding support for Intel INT33D3 ACPI devices. These INT33D3 devices follow yet another Intel defined (but not documented) ACPI GPIO button standard. Unlike the ACPI GPIO button devices supported so far, the GPIO used in the INT33D3 devices is active-high, rather then active-low. This commit makes setting the gpio_keys_button.active_low flag configurable through the soc_button_info struct and enables it for all currently supported devices. Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20200826150601.12137-2-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov

Input: ims-pcu - return error code rather than -ENOMEM

2020-08-07T00:33:40Z

Currently the assignment of -ENOMEM to error is redundant because error is not being read and -ENOMEM is being hard coded as an error return. Fix this by returning the error code in variable 'error'; this also allows the error code from a failed call to input_register_device to be preserved and returned to the caller rather than just returning a possibly inappropriate -ENOMEM. Kudos to Dan Carpenter for the suggestion of an improved fix. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King Reviewed-by: Dan Carpenter Link: https://lore.kernel.org/r/20200603152151.139337-1-colin.king@canonical.com Signed-off-by: Dmitry Torokhov

Input: ati_remote2 - add missing newlines when printing module parameters

2020-07-22T05:33:28Z

When I cat some module parameters by sysfs, it displays as follows. It's better to add a newline for easy reading. root@syzkaller:~# cat /sys/module/ati_remote2/parameters/mode_mask 0x1froot@syzkaller:~# cat /sys/module/ati_remote2/parameters/channel_mask 0xffffroot@syzkaller:~# Signed-off-by: Xiongfeng Wang Link: https://lore.kernel.org/r/20200720092148.9320-1-wangxiongfeng2@huawei.com Signed-off-by: Dmitry Torokhov

Input: Use fallthrough pseudo-keyword

2020-07-07T18:25:54Z

Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva Link: https://lore.kernel.org/r/20200707180857.GA30600@embeddedor Signed-off-by: Dmitry Torokhov