linux/drivers/input/misc, branch v6.4

Input: soc_button_array - add invalid acpi_index DMI quirk handling

2023-05-11T19:06:58Z

Some devices have a wrong entry in their button array which points to a GPIO which is required in another driver, so soc_button_array must not claim it. A specific example of this is the Lenovo Yoga Book X90F / X90L, where the PNP0C40 home button entry points to a GPIO which is not a home button and which is required by the lenovo-yogabook driver. Add a DMI quirk table which can specify an ACPI GPIO resource index which should be skipped; and add an entry for the Lenovo Yoga Book X90F / X90L to this new DMI quirk table. Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20230414072116.4497-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov

Input: cma3000_d0x - remove unneeded code

2023-04-10T02:18:39Z

Function input_set_abs_params() has already set EV_ABS bit for us. drivers/input/misc/cma3000_d0x.c:328 cma3000_init() warn: inconsistent indenting. Reported-by: Abaci Robot Signed-off-by: Jiapeng Chong Link: https://lore.kernel.org/r/20230407021343.63512-1-jiapeng.chong@linux.alibaba.com Signed-off-by: Dmitry Torokhov

Merge tag 'v6.3-rc2' into next

2023-03-17T11:01:30Z

Merge with mainline to get of_property_present() and other newer APIs.

Merge tag 'input-for-v6.3-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2023-02-25T23:01:32Z

Pull input updates from Dmitry Torokhov: - a set of tweaks to iqs269a touch controller driver - a fix for ads7846 driver to properly handle 7845 chip - cap11xx driver will support cap1203, cap1293 and cap1298 models - xpad driver will support 8BitDo Pro 2 Wired Controller - input drivers have been switched to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() - other miscellaneous fixes and tweaks * tag 'input-for-v6.3-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (113 commits) dt-bindings: input: iqs626a: Redefine trackpad property types Input: iqs626a - drop unused device node references dt-bindings: input: touchscreen: st,stmfts: convert to dtschema Input: cyttsp5 - fix bitmask for touch buttons Input: exc3000 - properly stop timer on shutdown Input: synaptics-rmi4 - fix SPI device ID Input: cap11xx - add support for cap1203, cap1293 and cap1298 dt-bindings: input: microchip,cap11xx: add cap1203, cap1293 and cap1298 Input: pmic8xxx-keypad - fix a Kconfig spelling mistake & hyphenation Input: edt-ft5x06 - fix typo in a comment Input: tegra-kbc - use devm_platform_get_and_ioremap_resource() Input: st-keyscan - use devm_platform_get_and_ioremap_resource() Input: spear-keyboard - use devm_platform_get_and_ioremap_resource() Input: olpc_apsp - use devm_platform_get_and_ioremap_resource() Input: arc_ps2 - use devm_platform_get_and_ioremap_resource() Input: apbps2 - use devm_platform_get_and_ioremap_resource() Input: altera_ps2 - use devm_platform_get_and_ioremap_resource() Input: ads7846 - don't check penirq immediately for 7845 Input: ads7846 - always set last command to PWRDOWN Input: ads7846 - don't report pressure for ads7845 ...

Input: hp_sdc_rtc - mark an unused function as __maybe_unused

2023-02-21T21:57:40Z

When CONFIG_PROC_FS is not set, one procfs-related function is not used, causing a build error or warning. Mark this function as __maybe_unused to quieten the build. ../drivers/input/misc/hp_sdc_rtc.c:268:12: warning: 'hp_sdc_rtc_proc_show' defined but not used [-Wunused-function] 268 | static int hp_sdc_rtc_proc_show(struct seq_file *m, void *v) | ^~~~~~~~~~~~~~~~~~~~ Fixes: c18bd9a1ff47 ("hp_sdc_rtc: Don't use create_proc_read_entry()") Signed-off-by: Randy Dunlap Reviewed-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/20230209010125.23690-1-rdunlap@infradead.org Signed-off-by: Dmitry Torokhov

Input: bbnsm_pwrkey - add bbnsm power key support

2023-02-21T21:56:35Z

The ON/OFF logic inside the BBNSM allows for connecting directly into a PMIC or other voltage regulator device. The module has an button input signal and a wakeup request input signal. It also has two interrupts (set_pwr_off_irq and set_pwr_on_irq) and an active-low PMIC enable (pmic_en_b) output. Add the power key support for the ON/OFF button function found in BBNSM module. Signed-off-by: Jacky Bai Reviewed-by: Peng Fan Link: https://lore.kernel.org/r/20230215024117.3357341-2-ping.bai@nxp.com Signed-off-by: Dmitry Torokhov

Input: iqs626a - drop unused device node references

2023-02-04T01:21:04Z

Each call to device/fwnode_get_named_child_node() must be matched with a call to fwnode_handle_put() once the corresponding node is no longer in use. This ensures a reference count remains balanced in the case of dynamic device tree support. Currently, the driver never calls fwnode_handle_put(); this patch adds the missing calls. Because fwnode_handle_put() does not take a const *fwnode_handle, the const qualifier is removed across all corresponding *fwnode_handle instances. As part of this change, trackpad channel touch thresholds and ATI base values are now specified under single trackpad channel child nodes. This enhancement moves both properties to scalar values as opposed to arrays, making their types consistent across bindings. Fixes: f1d2809de97a ("Input: Add support for Azoteq IQS626A") Signed-off-by: Jeff LaBundy Link: https://lore.kernel.org/r/Y9RQVe/V1Hnw1oly@nixie71 Signed-off-by: Dmitry Torokhov

Input: wistron_btns - use pm_sleep_ptr() to allow removal of ifdef CONFIG_PM guards

2023-01-27T22:49:53Z

As the guards only apply to suspend and resume, #ifdef CONFIG_PM_SLEEP would have been a tighter protection. As pm_sleep_ptr() lets the compiler see the protected ops structure and callbacks but also lets the compiler remove it as unused code if !CONFIG_PM_SLEEP this allows the #ifdef guards to be removed, slightly simplifying the resulting code. -- It seems likely that DEFINE_SIMPLE_DEV_PM_OPS() would work here but I'd prefer not to make that change unless someone can confirm that the extra callbacks registered will have no unwanted side effects in this driver. Signed-off-by: Jonathan Cameron Link: https://lore.kernel.org/r/20230114171620.42891-17-jic23@kernel.org Signed-off-by: Dmitry Torokhov

Input: cma3000 - use pm_sleep_ptr() to allow removal of ifdef CONFIG_PM guards

2023-01-27T22:49:53Z

As the guards only apply to suspend and resume, #ifdef CONFIG_PM_SLEEP would have been a tighter protection. As pm_sleep_ptr() lets the compiler see the protected ops structure and callbacks but also lets the compiler remove it as unused code if !CONFIG_PM_SLEEP this allows the #ifdef guards to be removed, slightly simplifying the resulting code. Signed-off-by: Jonathan Cameron -- It seems likely that DEFINE_SIMPLE_DEV_PM_OPS() would work here but I'd prefer not to make that change unless someone can confirm that the extra callbacks registered will have no unwanted side effects in this driver. Link: https://lore.kernel.org/r/20230114171620.42891-16-jic23@kernel.org Signed-off-by: Dmitry Torokhov

Input: adxl34x - unify dev_pm_ops using EXPORT_SIMPLE_DEV_PM_OPS()

2023-01-27T22:49:53Z

The I2C and SPI PM callbacks were identical (though wrapped in some bouncing out to the bus specific container of the struct device and then back again to get the drvdata). As such rather than just moving these to SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() take the opportunity to unify the struct dev_pm_ops and use the new EXPORT_SIMPLE_DEV_PM_OPS() macro so that we can drop the unused suspend and resume callbacks as well as the structure if !CONFIG_PM_SLEEP without needing to mark the callbacks __maybe_unused. Signed-off-by: Jonathan Cameron Cc: Michael Hennerich Link: https://lore.kernel.org/r/20230114171620.42891-9-jic23@kernel.org Signed-off-by: Dmitry Torokhov