linux/drivers/input/misc, branch v6.8

Merge tag 'input-for-v6.8-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2024-01-19T01:21:35Z

Pull input updates from Dmitry Torokhov: - a new driver for Adafruit Seesaw gamepad device - Zforce touchscreen will handle standard device properties for axis swap/inversion - handling of advanced sensitivity settings in Microchip CAP11xx capacitive sensor driver - more drivers have been converted to use newer gpiod API - support for dedicated wakeup IRQs in gpio-keys dirver - support for slider gestures and OTP variants in iqs269a driver - atkbd will report keyboard version as 0xab83 in cases when GET ID command was skipped (to deal with problematic firmware on newer laptops), restoring the previous behavior - other assorted cleanups and changes * tag 'input-for-v6.8-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (44 commits) Input: atkbd - use ab83 as id when skipping the getid command Input: driver for Adafruit Seesaw Gamepad dt-bindings: input: bindings for Adafruit Seesaw Gamepad Input: da9063_onkey - avoid explicitly setting input's parent Input: da9063_onkey - avoid using OF-specific APIs Input: iqs269a - add support for OTP variants dt-bindings: input: iqs269a: Add bindings for OTP variants Input: iqs269a - add support for slider gestures dt-bindings: input: iqs269a: Add bindings for slider gestures Input: gpio-keys - filter gpio_keys -EPROBE_DEFER error messages Input: zforce_ts - accept standard touchscreen properties dt-bindings: touchscreen: neonode,zforce: Use standard properties dt-bindings: touchscreen: convert neonode,zforce to json-schema dt-bindings: input: convert drv266x to json-schema Input: da9063 - use dev_err_probe() Input: da9063 - drop redundant prints in probe() Input: da9063 - simplify obtaining OF match data Input: as5011 - convert to GPIO descriptor Input: omap-keypad - drop optional GPIO support Input: tca6416-keypad - drop unused include ...

Merge branch 'next' into for-linus

2024-01-14T05:54:39Z

Prepare input updates for 6.8 merge window.

Merge tag 'pwm/for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

2024-01-12T22:59:50Z

Pull pwm updates from Thierry Reding: "This contains a bunch of cleanups and simplifications across the board, as well as a number of small fixes. Perhaps the most notable change here is the addition of an API that allows PWMs to be used in atomic contexts, which is useful when time- critical operations are involved, such as using a PWM to generate IR signals. Finally, I have decided to step down as PWM subsystem maintainer. Due to other responsibilities I have lately not been able to find the time that the subsystem deserves and Uwe, who has been helping out a lot for the past few years and has many things planned for the future, has kindly volunteered to take over. I have no doubt that he will be a suitable replacement" * tag 'pwm/for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (44 commits) MAINTAINERS: pwm: Thierry steps down, Uwe takes over pwm: linux/pwm.h: fix Excess kernel-doc description warning pwm: Add pwm_apply_state() compatibility stub pwm: cros-ec: Drop documentation for dropped struct member pwm: Drop two unused API functions pwm: lpc18xx-sct: Don't modify the cached period of other PWM outputs pwm: meson: Simplify using dev_err_probe() pwm: stmpe: Silence duplicate error messages pwm: Reduce number of pointer dereferences in pwm_device_request() pwm: crc: Use consistent variable naming for driver data pwm: omap-dmtimer: Drop locking dt-bindings: pwm: ti,pwm-omap-dmtimer: Update binding for yaml media: pwm-ir-tx: Trigger edges from hrtimer interrupt context pwm: bcm2835: Allow PWM driver to be used in atomic context pwm: Make it possible to apply PWM changes in atomic context pwm: renesas: Remove unused include pwm: Replace ENOTSUPP with EOPNOTSUPP pwm: Rename pwm_apply_state() to pwm_apply_might_sleep() pwm: Stop referencing pwm->chip pwm: Update kernel doc for struct pwm_chip ...

Input: da9063_onkey - avoid explicitly setting input's parent

2024-01-04T20:02:20Z

devm_input_allocate_device() already sets parent of the new input device, there's no need to set it up explicitly. Reviewed-by: Biju Das Link: https://lore.kernel.org/r/ZYOseYfVgg0Ve6Zl@google.com Signed-off-by: Dmitry Torokhov

Input: da9063_onkey - avoid using OF-specific APIs

2024-01-04T20:01:51Z

There is nothing OF-specific in the driver, so switch from OF properties helpers to generic device helpers. Reviewed-by: Biju Das Link: https://lore.kernel.org/r/ZYOsUfKceOFXuCt5@google.com Signed-off-by: Dmitry Torokhov

Input: iqs269a - add support for OTP variants

2024-01-01T21:24:03Z

This patch adds support for each available OTP variant of the device. The OTP configuration cannot be read over I2C, so it is derived from a compatible string instead. Early revisions of the D0 order code require their OTP-enabled func- tionality to be manually restored following a soft reset; this patch accommodates this erratum as well. Signed-off-by: Jeff LaBundy Link: https://lore.kernel.org/r/ZZMaZbdk6iAKUjlm@nixie71 Signed-off-by: Dmitry Torokhov

Input: iqs269a - add support for slider gestures

2024-01-01T21:24:03Z

This patch adds support for slider gestures that can be expressed by the device. Each gesture (e.g. tap or hold) can be mapped to a unique keycode for either slider 0 or 1. With this change, raw slider coordinates are reported only if the slider has no keycodes defined. This prevents unwanted mouse cur- sor movement when expressing axial gestures (e.g. swipe) and also eliminates some unnecessary I2C traffic. Different revisions of silicon use different tap and swipe timeout step sizes. Apply an appropriate scaling factor depending on which revision is found. To facilitate this change, store the iqs269_ver_info struct in the driver's private data so that other functions can use it after the driver has probed. Last but not least, a former reserved field in iqs269_ver_info now contains useful information; give it a name (fw_num). Signed-off-by: Jeff LaBundy Link: https://lore.kernel.org/r/ZZMaT46WQq1/Nrsb@nixie71 Signed-off-by: Dmitry Torokhov

Input: soc_button_array - add mapping for airplane mode button

2023-12-23T07:34:06Z

This add a mapping for the airplane mode button on the TUXEDO Pulse Gen3. While it is physically a key it behaves more like a switch, sending a key down on first press and a key up on 2nd press. Therefor the switch event is used here. Besides this behaviour it uses the HID usage-id 0xc6 (Wireless Radio Button) and not 0xc8 (Wireless Radio Slider Switch), but since neither 0xc6 nor 0xc8 are currently implemented at all in soc_button_array this not to standard behaviour is not put behind a quirk for the moment. Signed-off-by: Christoffer Sandberg Signed-off-by: Werner Sembach Link: https://lore.kernel.org/r/20231215171718.80229-1-wse@tuxedocomputers.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov

pwm: Rename pwm_apply_state() to pwm_apply_might_sleep()

2023-12-20T15:07:04Z

In order to introduce a pwm api which can be used from atomic context, we will need two functions for applying pwm changes: int pwm_apply_might_sleep(struct pwm *, struct pwm_state *); int pwm_apply_atomic(struct pwm *, struct pwm_state *); This commit just deals with renaming pwm_apply_state(), a following commit will introduce the pwm_apply_atomic() function. Acked-by: Uwe Kleine-König Acked-by: Guenter Roeck Acked-by: Mark Brown Acked-by: Dmitry Torokhov # for input Acked-by: Hans de Goede Acked-by: Jani Nikula Acked-by: Lee Jones Signed-off-by: Sean Young Signed-off-by: Thierry Reding

Input: da9063 - use dev_err_probe()

2023-12-15T06:30:52Z

Replace dev_err()->dev_err_probe() to simplify probe(). Signed-off-by: Biju Das Link: https://lore.kernel.org/r/20231213214803.9931-4-biju.das.jz@bp.renesas.com Signed-off-by: Dmitry Torokhov