linux/drivers/input/mouse/Makefile, branch master

Revert "Input: Add driver for PixArt PS/2 touchpad"

2024-10-01T10:54:05Z

This reverts commit 740ff03d7238214a318cdcfd96dec51832b053d2 because current PixArt detection is too greedy and claims devices that are not PixArt. Reported-by: Benjamin Tissoires Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2314756 Signed-off-by: Dmitry Torokhov

Input: Add driver for PixArt PS/2 touchpad

2024-07-24T04:27:18Z

This patch introduces a driver for the PixArt PS/2 touchpad, which supports both clickpad and touchpad types. At the same time, we extended the single data packet length to 16, because according to the current PixArt hardware and FW design, we need 11 bytes/15 bytes to represent the complete three-finger/four-finger data. Co-developed-by: Jon Xie Signed-off-by: Jon Xie Co-developed-by: Jay Lee Signed-off-by: Jay Lee Signed-off-by: Binbin Zhou Link: https://lore.kernel.org/r/20240704125243.3633569-1-zhoubinbin@loongson.cn Signed-off-by: Dmitry Torokhov

Input: navpoint - remove driver

2024-01-18T23:21:00Z

This driver does not use the SPI core as it should, instead tampering with the SSP registers manually. Refactoring the driver is almost certainly not worth it as the hardware seems to have been designed for and used only in the HP iPAQ hx4700 removed more than a year ago in d6df7df7ae5a ("ARM: pxa: remove unused board files"), so let's remove it. Signed-off-by: Duje Mihanović Link: https://lore.kernel.org/r/20240116-navpoint-removal-v2-2-e566806f1009@skole.hr Signed-off-by: Dmitry Torokhov

input: remove pxa930_trkball driver

2023-02-01T16:23:38Z

The pxa930 SoC support is getting removed, and no upstream board ever provided the trkball device that this driver relies on. Cc: Dmitry Torokhov Cc: Arnd Bergmann Cc: linux-input@vger.kernel.org Acked-by: Robert Jarzmik Signed-off-by: Arnd Bergmann

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

Input: psmouse - add support for SMBus companions

2017-03-25T17:37:29Z

This provides glue between PS/2 devices that enumerate the RMI4 devices and Elan touchpads to the RMI4 (or Elan) SMBus driver. The SMBus devices keep their PS/2 connection alive. If the initialization process goes too far (psmouse_activate called), the device disconnects from the I2C bus and stays on the PS/2 bus, that is why we explicitly disable PS/2 device reporting (by calling psmouse_deactivate) before trying to register SMBus companion device. The HID over I2C devices are enumerated through the ACPI DSDT, and their PS/2 device also exports the InterTouch bit in the extended capability 0x0C. However, the firmware keeps its I2C connection open even after going further in the PS/2 initialization. We don't need to take extra precautions with those device, especially because they block their PS/2 communication when HID over I2C is used. Signed-off-by: Benjamin Tissoires Signed-off-by: Dmitry Torokhov

Input: byd - add BYD PS/2 touchpad driver

2016-01-28T01:27:25Z

Driver for the BYD BTP10463 touchpad, found in PC Specialist `Lafite' laptops. This patch sends the magic command sequence which causes the touchpad to stream intellimouse-style packets. Gestures are detected inside the touchpad, and exposed as special values in the Z component of each packet - absolute coordinates are not supported, even in the Windows driver. At present, this supports two-finger vertical and horizontal scrolling, and provides the framework to expose the other gestures it can recognize. Signed-off-by: Chris Diamand Signed-off-by: Dmitry Torokhov

Input: cyapa - add gen6 device module support

2015-07-24T00:34:04Z

Based on the cyapa core, add support for basic functionality of the gen6 trackpad devices. The driver can automatically determine what protocol (gen3, gen5, or gen6) should be used with the attached trackpad device. Signed-off-by: Dudley Du Signed-off-by: Dmitry Torokhov

Input: add vmmouse driver

2015-04-14T21:29:03Z

VMMouse enables low-latency mouse-cursor-movements for VMWare and QEMU guests. By removing the guest cursor and using the host as a guest cursor the cursor movement appears instant although in reality there is some lag. To be able to do this, the host's view of the cursor position must exactly match the guest's view and an absolute pointer device is needed. Enter the VMMouse. While the VMMouse driver has historically been an Xorg user-space driver, implementing it as a kernel imput driver enables rootless Xorg and new compositing display servers for VMware guests. Signed-off-by: Thomas Hellstrom Signed-off-by: Dmitry Torokhov

Input: cyapa - add gen5 trackpad device basic functions support

2015-01-18T08:10:28Z

This change adds support for Gen5 Cypress trackpads. The driver detects generation of the device at probe time and automatically selects appropriate protocol. Signed-off-by: Dudley Du Tested-by: Jeremiah Mahler Signed-off-by: Dmitry Torokhov