linux/drivers/input/mouse/synaptics.c, branch v2.6.35

Input: synaptics - relax capability ID checks on newer hardware

2010-07-22T01:39:03Z

Older firmwares fixed the middle byte of the Synaptics capabilities query to 0x47, but starting with firmware 7.5 the middle byte represents submodel ID, sometimes also called "dash number". Reported-and-tested-by: Miroslav Šulc Signed-off-by: Dmitry Torokhov

Input: synaptics - fix wrong dimensions check

2010-07-14T16:33:56Z

The commit 83ba9ea8a04b72dfee2515428c15e7414ba4fc61 ommitted the return line for the old synaptics model accidentally. This resulted in a wrong check, namely, the dimensions are checked for the old devices that don't support the query properly. This patch adds the return line back. Signed-off-by: Takashi Iwai Signed-off-by: Dmitry Torokhov

Input: psmouse - small formatting changes to better follow coding style

2010-05-19T18:31:51Z

Signed-off-by: Dmitry Torokhov

Input: synaptics - set dimensions as reported by firmware

2010-05-19T17:15:29Z

Newer Synaptics firmware allows to query maximim dimensions reported by device, let's use this data. Tested-by: Takashi Iwai Signed-off-by: Dmitry Torokhov

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2010-05-05T14:53:18Z

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: joydev - allow binding to button-only devices Input: elantech - ignore high bits in the position coordinates Input: elantech - allow forcing Elantech protocol Input: elantech - fix firmware version check Input: ati_remote - add some missing devices from lirc_atiusb Input: eeti_ts - cancel pending work when going to suspend Input: Add support of Synaptics Clickpad device Revert "Input: ALPS - add signature for HP Pavilion dm3 laptops" Input: psmouse - ignore parity error for basic protocols

Input: Add support of Synaptics Clickpad device

2010-04-20T07:42:40Z

The new type of touchpads can be detected via a new query command 0x0c. The clickpad flags are in cap[0]:4 and cap[1]:0 bits. When the device is detected, the driver now reports only the left button as the supported buttons so that X11 driver can detect that the device is Clickpad. A Clickpad device gives the button events only as the middle button. The kernel driver morphs to the left button. The real handling of Clickpad is done rather in X driver side. Signed-off-by: Takashi Iwai Signed-off-by: Dmitry Torokhov

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

2010-03-30T13:02:32Z

percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo Guess-its-ok-by: Christoph Lameter Cc: Ingo Molnar Cc: Lee Schermerhorn

Input: psmouse - fix Synaptics detection when protocol is disabled

2010-01-07T09:53:30Z

For configurations where Synaptics hardware is present but the Synaptics extensions support is not compiled in, the mouse is reprobed and a new device is allocated on every suspend/resume. During probe, psmouse_switch_protocol() calls psmouse_extensions() with set_properties=1. This calls the dummy synaptics_init() which returns an error code, instructing us not to use the synaptics extensions. During resume, psmouse_reconnect() calls psmouse_extensions() with set_properties=0, in which case call to synaptics_init() is bypassed and PSMOUSE_SYNAPTICS is returned. Since the result is different from previous attempt psmouse_reconnect() fails and full re-probe happens. Fix this by tweaking the set_properties=0 codepath in psmouse_extensions() to be more careful about offering PSMOUSE_SYNAPTICS extensions. Signed-off-by: Daniel Drake Signed-off-by: Dmitry Torokhov

Input: psmouse - remove identification strings from DMI tables

2009-12-05T06:14:43Z

The driver does not reference identification strings in DMI tables and since these strings are no longer required by DMI core we can safely remove them and save some memory. Signed-off-by: Dmitry Torokhov

Input: psmouse - do not carry DMI data around

2009-12-04T07:25:36Z

DMI tables use considerable amount of memory. Mark them as __initconst so they will be discarded once module is loaded. Signed-off-by: Dmitry Torokhov