linux/drivers/input/mouse/trackpoint.c, branch v4.5

Input: psmouse - expose drift duration for IBM trackpoints

2014-12-17T23:46:51Z

IBM Trackpoints have a feature to compensate for drift by recalibrating themselves periodically. By default, if for 0.5 seconds there is no change in position, it's used as the new zero. This duration is too low. Often, the calibration happens when the trackpoint is in fact being used. IBM's Trackpoint Engineering Specifications show a configuration register that allows changing this duration, rstdft1. Expose it via sysfs among the other settings. Signed-off-by: Mike Murdoch Signed-off-by: Dmitry Torokhov

Input: add missing POINTER / DIRECT properties to a bunch of drivers

2014-09-08T21:58:12Z

I've not done a full audit of all mouse drivers, I noticed these ones were missing the POINTER property while working on the POINTING_STICK property. Signed-off-by: Hans de Goede Signed-off-by: Dmitry Torokhov

Input: add INPUT_PROP_POINTING_STICK property

2014-09-08T21:58:11Z

It is useful for userspace to know that there not dealing with a regular mouse but rather with a pointing stick (e.g. a trackpoint) so that userspace can e.g. automatically enable middle button scrollwheel emulation. It is impossible to tell the difference from the evdev info without resorting to putting a list of device / driver names in userspace, this is undesirable. Add a property which allows userspace to see if a device is a pointing stick, and set it on all the pointing stick drivers. Signed-off-by: Hans de Goede Acked-by: Benjamin Tissoires Acked-by: Peter Hutterer Signed-off-by: Dmitry Torokhov

Input: trackpoint - Optimize trackpoint init to use power-on reset

2013-04-19T16:05:44Z

The trackpoint driver sets various parameter default values, all of which happen to be power-on defaults (Source: IBM TrackPoint Engineering Specification, Version 4.0. Also confirmed by empirical data). By sending the power-on reset command to reset all parameters to power-on state, we can skip the lengthy process of programming all parameters. In testing, ~2.5 secs of time writing parameters was reduced to .35 seconds waiting for power-on reset to complete. Signed-off-by: Shawn Nematbakhsh Signed-off-by: Dmitry Torokhov

Input: trackpoint - use psmouse_fmt() for messages

2012-04-10T07:40:39Z

Use psmouse_*() macros introduced in commit b5d21704361ee. Signed-off-by: JJ Ding Signed-off-by: Dmitry Torokhov

Input: convert obsolete strict_strtox to kstrtox

2011-11-10T05:23:26Z

With commit 67d0a0754455f89ef3946946159d8ec9e45ce33a we mark strict_strtox as obsolete. Convert all remaining such uses in drivers/input/. Also change long to appropriate types, and return error conditions from kstrtox separately, as Dmitry sugguests. Signed-off-by: JJ Ding Signed-off-by: Dmitry Torokhov

Input: return -ENOMEM in select drivers when memory allocation fails

2010-10-13T14:49:23Z

Instead of using -1 let's start using proper error codes. Signed-off-by: Davidlohr Bueso Signed-off-by: Dmitry Torokhov

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

2010-03-30T13:02:32Z

percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo Guess-its-ok-by: Christoph Lameter Cc: Ingo Molnar Cc: Lee Schermerhorn

Input: psmouse - rework setting of BTN_MIDDLE capability

2009-11-20T08:52:12Z

Do not start protocol detection assuming that middle mouse is present, instead let individual protocols explicitly set this capability. This fixes issue with Synaptics touchpads pretending that they have middle button when hardware clearly reports otherwise. Reported-and-tested-by: Andrey Borzenkov Signed-off-by: Dmitry Torokhov

Input: psmouse - use boolean type

2009-09-11T05:11:38Z

Signed-off-by: Dmitry Torokhov