linux/drivers/input/serio, branch v2.6.37

parisc: Fix GSC PS/2 driver name for keyboard and mouse

2010-12-04T16:19:59Z

Fix kernel warnings caused by the driver name of GSC PS/2 containing '/'. The following warnings are observed on a K410 system : [ 10.700000] name 'GSC PS/2 keyboard' [ 10.732000] ------------[ cut here ]------------ [ 10.772000] WARNING: at fs/proc/generic.c:323 [ 10.828000] Modules linked in: [ 10.916000] [ 10.916000] YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI [ 10.936000] PSW: 00000000000001000000000000001111 Not tainted [ 10.992000] r00-03 0004000f 104fe3e0 10201ea0 00000000 [ 11.060000] r04-07 4fc405c8 00000006 4fc405c8 4fc40694 [ 11.124000] r08-11 4fc40708 10438aa0 00000001 1043bfc8 [ 11.184000] r12-15 104ff2a0 104ff2a0 4fc38634 104ff2a0 [ 11.248000] r16-19 f0001570 10479af0 f000006c 1044fe50 [ 11.308000] r20-23 00000000 00000028 104cd858 00000000 [ 11.372000] r24-27 ffffffff 0000000e 1044fe10 1043bbe0 [ 11.436000] r28-31 0000002b 00000078 4fc40800 0000000d [ 11.496000] sr00-03 00000000 00000000 00000000 00000000 [ 11.560000] sr04-07 00000000 00000000 00000000 00000000 [ 11.624000] [ 11.688000] IASQ: 00000000 00000000 IAOQ: 10201ea0 10201ea4 [ 11.704000] IIR: 03ffe01f ISR: 00000000 IOR: 0000000d [ 11.772000] CPU: 0 CR30: 4fc40000 CR31: f01043b0 [ 11.836000] ORIG_R28: 4fc40940 [ 11.904000] IAOQ[0]: __xlate_proc_name+0x90/0xd0 [ 11.940000] IAOQ[1]: __xlate_proc_name+0x94/0xd0 [ 11.996000] RP(r2): __xlate_proc_name+0x90/0xd0 [ 12.052000] Backtrace: [ 12.108000] [<10257790>] vsnprintf+0x290/0x4f4 [ 12.136000] [ 12.188000] ---[ end trace 91bf6ece17e322dd ]--- [ 12.208000] serio: GSC PS/2 keyboard port at 0x0001c000 irq 19 @ 10:12:7 [ 12.264000] name 'GSC PS/2 mouse' [ 12.344000] ------------[ cut here ]------------ [ 12.384000] WARNING: at fs/proc/generic.c:323 [ 12.436000] Modules linked in: [ 12.524000] [ 12.528000] YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI [ 12.544000] PSW: 00000000000001000000000000001111 Tainted: G W [ 12.600000] r00-03 0004000f 104fe3e0 10201ea0 00000000 [ 12.680000] r04-07 4fc405c8 00000006 4fc405c8 4fc40694 [ 12.740000] r08-11 4fc40708 10438aa0 00000001 1043bfc8 [ 12.804000] r12-15 104ff2a0 104ff2a0 4fc38634 104ff2a0 [ 12.868000] r16-19 f0001570 10479af0 f000006c 1044fe50 [ 12.928000] r20-23 00000000 00000025 104cd858 00000000 [ 12.992000] r24-27 ffffffff 0000000e 1044fe10 1043bbe0 [ 13.056000] r28-31 00000028 00000078 4fc40800 0000000d [ 13.116000] sr00-03 00000000 00000000 00000000 00000000 [ 13.180000] sr04-07 00000000 00000000 00000000 00000000 [ 13.244000] [ 13.308000] IASQ: 00000000 00000000 IAOQ: 10201ea0 10201ea4 [ 13.324000] IIR: 03ffe01f ISR: 00000000 IOR: 0000000d [ 13.392000] CPU: 0 CR30: 4fc40000 CR31: f01043b0 [ 13.456000] ORIG_R28: 4fc40940 [ 13.524000] IAOQ[0]: __xlate_proc_name+0x90/0xd0 [ 13.560000] IAOQ[1]: __xlate_proc_name+0x94/0xd0 [ 13.616000] RP(r2): __xlate_proc_name+0x90/0xd0 [ 13.672000] Backtrace: [ 13.728000] [<10257790>] vsnprintf+0x290/0x4f4 [ 13.756000] [ 13.808000] ---[ end trace 91bf6ece17e322de ]--- [ 13.828000] serio: GSC PS/2 mouse port at 0x00020100 irq 19 @ 10:12:8 Signed-off-by: Guy Martin Acked-by: Helge Deller Signed-off-by: Kyle McMartin

BKL: remove extraneous #include

2010-11-17T16:59:32Z

The big kernel lock has been removed from all these files at some point, leaving only the #include. Remove this too as a cleanup. Signed-off-by: Arnd Bergmann Signed-off-by: Linus Torvalds

Input: i8042 - add Sony VAIOs to MUX blacklist

2010-11-04T15:39:11Z

The Sony VPCZ1 doesn't support active multiplexing and trying to enable it causes keyboard to stop working. Since most (all?) VAIOs do not have external PS/2 ports nor they implement active multiplexing properly, and trying to enable MUX usually messes up keyboard/touchpad, let's simply disable MUX probing based on board name (VAIO). Signed-off-by: Jesse Barnes Signed-off-by: Dmitry Torokhov

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2010-10-25T14:59:01Z

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (75 commits) Input: wacom - specify Cinitq supported tools Input: ab8500-ponkey - fix IRQ freeing in error path Input: adp5588-keys - use more obvious i2c_device_id name string Input: ad7877 - switch to using threaded IRQ Input: ad7877 - use attribute group to control visibility of attributes Input: serio - add support for PS2Mult multiplexer protocol Input: wacom - properly enable runtime PM Input: ad7877 - filter events where pressure is beyond the maximum Input: ad7877 - implement EV_KEY:BTN_TOUCH reporting Input: ad7877 - implement specified chip select behavior Input: hp680_ts_input - use cancel_delayed_work_sync() Input: mousedev - correct lockdep annotation Input: ads7846 - switch to using threaded IRQ Input: serio - support multiple child devices per single parent Input: synaptics - simplify pass-through port handling Input: add ROHM BU21013 touch panel controller support Input: omap4-keypad - wake-up on events & long presses Input: omap4-keypad - fix interrupt line configuration Input: omap4-keypad - SYSCONFIG register configuration Input: omap4-keypad - use platform device helpers ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6

2010-10-23T02:59:04Z

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (49 commits) serial8250: ratelimit "too much work" error serial: bfin_sport_uart: speed up sport RX sample rate to be 3% faster serial: abstraction for 8250 legacy ports serial/imx: check that the buffer is non-empty before sending it out serial: mfd: add more baud rates support jsm: Remove the uart port on errors Alchemy: Add UART PM methods. 8250: allow platforms to override PM hook. altera_uart: Don't use plain integer as NULL pointer altera_uart: Fix missing prototype for registering an early console altera_uart: Fixup type usage of port flags altera_uart: Make it possible to use Altera UART and 8250 ports together altera_uart: Add support for different address strides altera_uart: Add support for getting mapbase and IRQ from resources altera_uart: Add support for polling mode (IRQ-less) serial: Factor out uart_poll_timeout() from 8250 driver serial: mark the 8250 driver as maintained serial: 8250: Don't delay after transmitter is ready. tty: MAINTAINERS: add drivers/serial/jsm/ as maintained driver vcs: invoke the vt update callback when /dev/vcs* is written to ...

Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl

2010-10-22T17:52:56Z

* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl: vfs: make no_llseek the default vfs: don't use BKL in default_llseek llseek: automatically add .llseek fop libfs: use generic_file_llseek for simple_attr mac80211: disallow seeks in minstrel debug code lirc: make chardev nonseekable viotape: use noop_llseek raw: use explicit llseek file operations ibmasmfs: use generic_file_llseek spufs: use llseek in all file operations arm/omap: use generic_file_llseek in iommu_debug lkdtm: use generic_file_llseek in debugfs net/wireless: use generic_file_llseek in debugfs drm: use noop_llseek

serport: place serport serio device correctly in the device tree

2010-10-22T17:19:58Z

Make serport serio device to be a child of corresponding tty device instead of just hanging at /sys/devices/serioX. Signed-off-by: Dmitry Eremin-Solenikov Acked-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: serio - add support for PS2Mult multiplexer protocol

2010-10-18T16:33:31Z

PS2Mult is a simple serial protocol used for multiplexing several PS/2 streams into one serial data stream. It's used e.g. on TQM85xx series of boards. Signed-off-by: Dmitry Eremin-Solenikov Signed-off-by: Dmitry Torokhov

Merge branch 'for-linus' into next

2010-10-18T04:20:19Z

llseek: automatically add .llseek fop

2010-10-15T13:53:27Z

All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann Cc: Julia Lawall Cc: Christoph Hellwig