linux/drivers/input/serio, branch v5.10

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2020-12-12T17:41:33Z

Pull input fixes from Dmitry Torokhov: - a fix for cm109 stomping on its own control URB if it tries to toggle buzzer immediately after userspace opens input device (found by syzcaller) - another fix for Raydium touchscreens that do not like splitting command transfers - quirks for i8042, soc_button_array, and goodix drivers to make them work better with certain hardware. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: goodix - add upside-down quirk for Teclast X98 Pro tablet Input: cm109 - do not stomp on control URB Input: i8042 - add Acer laptops to the i8042 reset list Input: cros_ec_keyb - send 'scancodes' in addition to key events Input: soc_button_array - add Lenovo Yoga Tablet2 1051L to the dmi_use_low_level_irq list Input: raydium_ts_i2c - do not split tx transactions

Input: i8042 - add Acer laptops to the i8042 reset list

2020-12-10T05:01:22Z

The touchpad operates in Basic Mode by default in the Acer BIOS setup, but some Aspire/TravelMate models require the i8042 to be reset in order to be correctly detected. Signed-off-by: Chris Chiu Link: https://lore.kernel.org/r/20201207071250.15021-1-chiu@endlessos.org Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2020-12-06T00:16:34Z

Pull input fixes from Dmitry Torokhov: "A fix for 'RETRIGEN' handling in Atmel touch controllers that was causing lost interrupts on systems using edge-triggered interrupts, a quirk for i8042 driver, and a couple more fixes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: atmel_mxt_ts - fix lost interrupts Input: xpad - support Ardwiino Controllers Input: i8042 - add ByteSpeed touchpad to noloop table Input: i8042 - fix error return code in i8042_setup_aux() Input: soc_button_array - add missing include

Input: i8042 - add ByteSpeed touchpad to noloop table

2020-12-01T06:40:43Z

It looks like the C15B laptop got another vendor: ByteSpeed LLC. Avoid AUX loopback on this touchpad as well, thus input subsystem will be able to recognize a Synaptics touchpad in the AUX port. BugLink: https://bugs.launchpad.net/bugs/1906128 Signed-off-by: Po-Hsu Lin Link: https://lore.kernel.org/r/20201201054723.5939-1-po-hsu.lin@canonical.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov

Input: i8042 - fix error return code in i8042_setup_aux()

2020-11-25T01:48:45Z

Fix to return a negative error code from the error handling case instead of 0 in function i8042_setup_aux(), as done elsewhere in this function. Fixes: f81134163fc7 ("Input: i8042 - use platform_driver_probe") Reported-by: Hulk Robot Signed-off-by: Luo Meng Reviewed-by: Hans de Goede Link: https://lore.kernel.org/r/20201123133420.4071187-1-luomeng12@huawei.com Signed-off-by: Dmitry Torokhov

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2020-11-17T20:00:40Z

Pull input fixes from Dmitry Torokhov: "A fix for use-after-free in the Sun keyboard driver, a fix to firmware updates on newer ICs in the Elan touchpad diver, and a couple misc driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elan_i2c - fix firmware update on newer ICs Input: resistive-adc-touch - fix kconfig dependency on IIO_BUFFER Input: sunkbd - avoid use-after-free in teardown paths Input: i8042 - allow insmod to succeed on devices without an i8042 controller Input: adxl34x - clean up a data type in adxl34x_probe()

Input: i8042 - allow insmod to succeed on devices without an i8042 controller

2020-10-27T03:56:28Z

The i8042 module exports several symbols which may be used by other modules. Before this commit it would refuse to load (when built as a module itself) on systems without an i8042 controller. This is a problem specifically for the asus-nb-wmi module. Many Asus laptops support the Asus WMI interface. Some of them have an i8042 controller and need to use i8042_install_filter() to filter some kbd events. Other models do not have an i8042 controller (e.g. they use an USB attached kbd). Before this commit the asus-nb-wmi driver could not be loaded on Asus models without an i8042 controller, when the i8042 code was built as a module (as Arch Linux does) because the module_init function of the i8042 module would fail with -ENODEV and thus the i8042_install_filter symbol could not be loaded. This commit fixes this by exiting from module_init with a return code of 0 if no controller is found. It also adds a i8042_present bool to make the module_exit function a no-op in this case and also adds a check for i8042_present to the exported i8042_command function. The latter i8042_present check should not really be necessary because when builtin that function can already be used on systems without an i8042 controller, but better safe then sorry. Reported-and-tested-by: Marius Iacob Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20201008112628.3979-2-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov

Merge branch 'parisc-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux

2020-10-25T17:59:34Z

Pull more parisc updates from Helge Deller: - During this merge window O_NONBLOCK was changed to become 000200000, but we missed that the syscalls timerfd_create(), signalfd4(), eventfd2(), pipe2(), inotify_init1() and userfaultfd() do a strict bit-wise check of the flags parameter. To provide backward compatibility with existing userspace we introduce parisc specific wrappers for those syscalls which filter out the old O_NONBLOCK value and replaces it with the new one. - Prevent HIL bus driver to get stuck when keyboard or mouse isn't attached - Improve error return codes when setting rtc time - Minor documentation fix in pata_ns87415.c * 'parisc-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: ata: pata_ns87415.c: Document support on parisc with superio chip parisc: Add wrapper syscalls to fix O_NONBLOCK flag usage hil/parisc: Disable HIL driver when it gets stuck parisc: Improve error return codes when setting rtc time

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2020-10-23T23:16:31Z

Pull input updates from Dmitry Torokhov: - a new driver for ADC driven joysticks - a new Zintix touchscreen driver - enhancements to Intel SoC button array driver - support for F3A "function" in Synaptics RMI4 driver - assorted driver fixups * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (29 commits) Input: Add MAINTAINERS entry for SiS i2c touch input driver Input: evdev - per-client waitgroups Input: synaptics - enable InterTouch for ThinkPad T14 Gen 1 Input: synaptics - enable InterTouch for ThinkPad P1/X1E gen 2 Input: synaptics-rmi4 - support bootloader v8 in f34v7 Input: synaptics-rmi4 - add support for F3A Input: synaptics-rmi4 - rename f30_data to gpio_data Input: add zinitix touchscreen driver dt-bindings: input/touchscreen: add bindings for zinitix Input: joystick - add ADC attached joystick driver. dt-bindings: input: Add docs for ADC driven joystick Input: sun4i-ps2 - fix handling of platform_get_irq() error Input: twl4030_keypad - fix handling of platform_get_irq() error Input: omap4-keypad - fix handling of platform_get_irq() error Input: ep93xx_keypad - fix handling of platform_get_irq() error Input: stmfts - fix a & vs && typo Input: imx6ul_tsc - unify open/close and PM paths Input: imx6ul_tsc - clean up some errors in imx6ul_tsc_resume() Input: elants_i2c - fix typo for an attribute to show calibration count Input: elants_i2c - report resolution of ABS_MT_TOUCH_MAJOR by FW information. ...

hil/parisc: Disable HIL driver when it gets stuck

2020-10-22T20:44:35Z

When starting a HP machine with HIL driver but without an HIL keyboard or HIL mouse attached, it may happen that data written to the HIL loop gets stuck (e.g. because the transaction queue is full). Usually one will then have to reboot the machine because all you see is and endless output of: Transaction add failed: transaction already queued? In the higher layers hp_sdc_enqueue_transaction() is called to queued up a HIL packet. This function returns an error code, and this patch adds the necessary checks for this return code and disables the HIL driver if further packets can't be sent. Tested on a HP 730 and a HP 715/64 machine. Signed-off-by: Helge Deller Cc: