linux/drivers/input/serio, branch v5.7

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2020-05-28T19:41:11Z

Pull input fixes from Dmitry Torokhov: "Just a few random driver fixups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: synaptics - add a second working PNP_ID for Lenovo T470s Input: applespi - replace zero-length array with flexible-array Input: axp20x-pek - always register interrupt handlers Input: lm8333 - update contact email Input: synaptics-rmi4 - fix error return code in rmi_driver_probe() Input: synaptics-rmi4 - really fix attn_data use-after-free Input: i8042 - add ThinkPad S230u to i8042 reset list Revert "Input: i8042 - add ThinkPad S230u to i8042 nomux list" Input: dlink-dir685-touchkeys - fix a typo in driver name Input: xpad - add custom init packet for Xbox One S controllers Input: evdev - call input_flush_device() on release(), not flush() Input: i8042 - add ThinkPad S230u to i8042 nomux list Input: usbtouchscreen - add support for BonXeon TP Input: cros_ec_keyb - use cros_ec_cmd_xfer_status helper Input: mms114 - fix handling of mms345l Input: elants_i2c - support palm detection

Input: i8042 - add ThinkPad S230u to i8042 reset list

2020-04-28T01:13:35Z

On the Lenovo ThinkPad Twist S230u (3347-4HU) with BIOS version "GDETC1WW (1.81 ) 06/27/2019", the keyboard, Synaptics TouchPad, and TrackPoint either do not function or stop functioning a few minutes after boot. This problem has been noted before, perhaps only occurring with BIOS 1.57 and later.[1][2][3][4][5] Odds of a BIOS fix appear to be low: 1.57 was released over 6 years ago and although the [BIOS changelog] notes "Fixed an issue of UEFI touchpad/trackpoint/keyboard/touchscreen" in 1.58, it appears to be insufficient. Setting i8042.reset=1 or adding 33474HU to the reset list avoids the issue on my system from either warm or cold boot. [1]: https://bugs.launchpad.net/bugs/1210748 [2]: https://bbs.archlinux.org/viewtopic.php?pid=1360425 [3]: https://forums.linuxmint.com/viewtopic.php?f=46&t=41200 [4]: https://forums.linuxmint.com/viewtopic.php?f=49&t=157115 [5]: https://forums.lenovo.com/topic/findpost/27/1337119 [BIOS changelog]: https://download.lenovo.com/pccbbs/mobiles/gduj33uc.txt Signed-off-by: Kevin Locke Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/94f384b0f75f90f71425d7dce7ac82c59ddb87a8.1587702636.git.kevin@kevinlocke.name Signed-off-by: Dmitry Torokhov

Revert "Input: i8042 - add ThinkPad S230u to i8042 nomux list"

2020-04-28T01:06:02Z

This reverts commit 18931506465a762ffd3f4803d36a18d336a67da9. From Kevin Locke: "... nomux only appeared to fix the issue because the controller continued working after warm reboots. After more thorough testing from both warm and cold start, I now believe the entry should be added to i8042_dmi_reset_table rather than i8042_dmi_nomux_table as i8042.reset=1 alone is sufficient to avoid the issue from both states while i8042.nomux is not."

Input: i8042 - add ThinkPad S230u to i8042 nomux list

2020-04-20T19:41:24Z

On the Lenovo ThinkPad Twist S230u (3347-4HU) with BIOS version "GDETC1WW (1.81 ) 06/27/2019", whether booted in UEFI or Legacy/CSM mode the keyboard, Synaptics TouchPad, and TrackPoint either do not function or stop functioning a few minutes after boot. This problem has been noted before, perhaps only occurring on BIOS 1.57 and later.[1][2][3][4][5] This model does not have an external PS/2 port, so mux does not appear to be useful. Odds of a BIOS fix appear to be low: 1.57 was released over 6 years ago and although the [BIOS changelog] notes "Fixed an issue of UEFI touchpad/trackpoint/keyboard/touchscreen" in 1.58, it appears to be insufficient. Adding 33474HU to the nomux list avoids the issue on my system. [1]: https://bugs.launchpad.net/bugs/1210748 [2]: https://bbs.archlinux.org/viewtopic.php?pid=1360425 [3]: https://forums.linuxmint.com/viewtopic.php?f=46&t=41200 [4]: https://forums.linuxmint.com/viewtopic.php?f=49&t=157115 [5]: https://forums.lenovo.com/topic/findpost/27/1337119 [BIOS changelog]: https://download.lenovo.com/pccbbs/mobiles/gduj33uc.txt Signed-off-by: Kevin Locke Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/feb8a8339a67025dab3850e6377eb6f3a0e782ba.1587400635.git.kevin@kevinlocke.name Signed-off-by: Dmitry Torokhov

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2020-04-08T03:20:12Z

Pull input updates from Dmitry Torokhov: "An update to the Goodix touchscreen driver to enable it work properly on various Bay Trail and Cherry Trail devices, and a few other assorted changes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (26 commits) Input: update SPDX tag for input-event-codes.h Input: i8042 - add Acer Aspire 5738z to nomux list Input: goodix - fix compilation when ACPI support is disabled dt-bindings: touchscreen: Convert edt-ft5x06 to json-schema Input: of_touchscreen - explicitly choose axis Input: goodix - support gt9147 touchpanel dt-bindings: touchscreen: goodix: support of gt9147 Input: goodix - add support for Goodix GT917S Input: goodix - use string-based chip ID dt-bindings: input: touchscreen: add compatible string for Goodix GT917S Input: goodix - add support for more then one touch-key Input: goodix - fix spurious key release events Input: goodix - try to reset the controller if the i2c-test fails Input: goodix - restore config on resume if necessary Input: goodix - make goodix_send_cfg() take a raw buffer as argument Input: goodix - add minimum firmware size check Input: goodix - save a copy of the config from goodix_read_config() Input: goodix - move defines to above struct goodix_ts_data declaration Input: goodix - add support for controlling the IRQ pin through ACPI methods Input: goodix - add support for getting IRQ + reset GPIOs on Bay Trail devices ...

Input: i8042 - add Acer Aspire 5738z to nomux list

2020-04-01T20:27:05Z

The Acer Aspire 5738z has a button to disable (and re-enable) the touchpad next to the touchpad. When this button is pressed a LED underneath indicates that the touchpad is disabled (and an event is send to userspace and GNOME shows its touchpad enabled / disable OSD thingie). So far so good, but after re-enabling the touchpad it no longer works. The laptop does not have an external ps2 port, so mux mode is not needed and disabling mux mode fixes the touchpad no longer working after toggling it off and back on again, so lets add this laptop model to the nomux list. Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20200331123947.318908-1-hdegoede@redhat.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2020-02-03T22:05:15Z

Pull input updates from Dmitry Torokhov: - a driver for SGI IOC3 PS/2 controller - updates to driver for FocalTech FT5x06 series touch screen controllers - other assorted fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: synaptics-rmi4 - switch to reduced reporting mode dt-bindings: touchscreen: Convert Goodix touchscreen to json-schema dt-bindings: touchscreen: Add touchscreen schema Input: add IOC3 serio driver Input: axp20x-pek - enable wakeup for all AXP variants Input: axp20x-pek - respect userspace wakeup configuration Input: ads7846 - use new `delay` structure for SPI transfer delays Input: edt-ft5x06 - use pm core to enable/disable the wake irq Input: edt-ft5x06 - make wakeup-source switchable Input: edt-ft5x06 - document wakeup-source capability Input: edt-ft5x06 - alphabetical include reorder Input: edt-ft5x06 - work around first register access error Input: apbps2 - add __iomem to register struct Input: axp20x-pek - make device attributes static Input: elants_i2c - check Remark ID when attempting firmware update

Merge tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

2020-02-03T14:42:03Z

Pull Hyper-V updates from Sasha Levin: - Most of the commits here are work to enable host-initiated hibernation support by Dexuan Cui. - Fix for a warning shown when host sends non-aligned balloon requests by Tianyu Lan. * tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: hv_utils: Add the support of hibernation hv_utils: Support host-initiated hibernation request hv_utils: Support host-initiated restart request Tools: hv: Reopen the devices if read() or write() returns errors video: hyperv: hyperv_fb: Use physical memory for fb on HyperV Gen 1 VMs. Drivers: hv: vmbus: Ignore CHANNELMSG_TL_CONNECT_RESULT(23) video: hyperv_fb: Fix hibernation for the deferred IO feature Input: hyperv-keyboard: Add the support of hibernation hv_balloon: Balloon up according to request page number

Input: hyperv-keyboard: Add the support of hibernation

2020-01-25T21:52:11Z

Add suspend() and resume() functions so the Hyper-V virtual keyboard can participate in VM hibernation. Note that the keyboard is a "wakeup" device that could abort an in-progress hibernation if there is keyboard event. No attempt is made to suppress this behavior. If desired, a sysadmin can disable the keyboard as a wakeup device using standard mechanisms such as: echo disabled > /sys/bus/vmbus/drivers/hyperv_keyboard/XXX/power/wakeup (where XXX is the device's GUID) Reviewed-by: Michael Kelley Signed-off-by: Dexuan Cui Signed-off-by: Sasha Levin

Input: add IOC3 serio driver

2020-01-22T18:05:53Z

This patch adds a platform driver for supporting keyboard and mouse interface of SGI IOC3 chips. Signed-off-by: Thomas Bogendoerfer Link: https://lore.kernel.org/r/20200122135220.22354-1-tbogendoerfer@suse.de Signed-off-by: Dmitry Torokhov