linux/drivers/input/touchscreen/Kconfig, branch v2.6.25

Input: improve Kconfig help entries for HP Jornada devices

2008-01-14T05:54:23Z

Signed-off-by: Kristoffer Ericson Signed-off-by: Dmitry Torokhov

Input: usbtouchscreen - add support for GoTop tablet devices

2007-10-22T04:59:47Z

Add support for GoTop Super_Q2/GogoPen/PenPower tablets to usbtouchscreen. Protocol discovery was done by Yick Yan Lam. Signed-off-by: Daniel Ritz Signed-off-by: Dmitry Torokhov

Input: usbtouchscreen - add support for GeneralTouch devices

2007-10-12T18:19:40Z

Signed-off-by: Ilya Frolov Signed-off-by: Dmitry Torokhov

Input: add support for the HP Jornada 7xx (710/720/728) touchscreen

2007-09-26T04:02:56Z

Signed-off-by: Kristoffer Ericson Signed-off-by: Dmitry Torokhov

Input: usbtouchscreen - add support for IdealTEK URTC1000

2007-09-05T03:45:01Z

This patch adds support for IdealTEK URTC1000 touchscreen controllers. Documentation can be downloaded at: http://projects.tbmn.org/cgi-bin/trac.cgi/wiki/urtc-1000 Signed-off-by: Ondrej Zary Signed-off-by: Daniel Ritz Signed-off-by: Dmitry Torokhov

Input: add driver for Fujitsu serial touchscreens

2007-07-18T04:37:01Z

These serial touchscreens are found on some Fujitsu lifebook P-series laptops, and the B6210. Using this requires a new version of inputattach and doing: inputattach -fjt /dev/ttyS0 Big thanks to Stephen Hemminger for testing it and making it work on his B6210 laptop. Signed-off-by: Stephen Hemminger Signed-off-by: Dmitry Torokhov

Input: usbtouchscreen - add support for IRTOUCHSYSTEMS touchscreens

2007-07-10T04:35:18Z

This patch adds support for IRTOUCHSYSTEMS (or UNITOP) infrared touchscreens. The touchscreen sends data in 8-byte packets. BYTE 0 - unknown meaning, seen only one value: 0x54 BYTE 1 - unknown meaning, 3 lowest bits indicate touch state values seen: 0x81, 0x82 or 0x83 bit 0 = set if the screen is touched and was not touched before (touch bit 1 = set if the screen is touched and was touched (dragging) bit 2 = set if the touch was ended (release) BYTES 2 and 3 - X position, high-order-byte first, range = 0 to 0x0FFF BYTES 4 and 5 - Y position, high-order-byte first, range = 0 to 0x0FFF BYTE 6 - unknown meaning, seen only one value: 0xFF BYTE 7 - unknown meaning, seen only one value: 0x00 Signed-off-by: Ondrej Zary Signed-off-by: Daniel Ritz Signed-off-by: Dmitry Torokhov

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2007-05-23T15:11:43Z

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: ads7846 - SPI_CPHA mode bugfix Input: ads7846 - document that it handles tsc2046 too Input: input-polldev - add module info Input: ucb1x00-ts - remove commented out code Input: ucb1400_ts - use sched_setscheduler() Input: ALPS - force stream mode Input: iforce - minor clean-ups Input: iforce - fix force feedback not working Input: adbhid - do not access input_dev->private directly Input: logips2pp - add type 72 (PS/2 TrackMan Marble)

Input: ads7846 - document that it handles tsc2046 too

2007-05-23T03:28:40Z

The TSC2046 is an updated version of the ADS7846 ... mention that in the Kconfig helptext and driver source. Signed-off-by: David Brownell Acked-by: Kevin Hilman Signed-off-by: Dmitry Torokhov

missing dependencies for USB drivers in input

2007-05-16T01:56:37Z

stuff that does select USB should depend on USB_ARCH_HAS_HCD, or we'll end up with unbuildable configs. Signed-off-by: Al Viro Signed-off-by: Linus Torvalds