linux/drivers/input/touchscreen/Kconfig, branch v4.0

Input: sun4i-ts - add thermal driver dependency

2015-03-02T23:15:50Z

The sun4i-ts driver has had a dependency on the thermal code with the addition of the thermal zone sensor support, but this is not currently enforced in Kconfig, so with TOUCHSCREEN_SUN4I=y, THERMAL=m and THERMAL_OF=y we get drivers/built-in.o: In function `sun4i_ts_remove': :(.text+0x2376f4): undefined reference to `thermal_zone_of_sensor_unregister' drivers/built-in.o: In function `sun4i_ts_probe': :(.text+0x237a94): undefined reference to `thermal_zone_of_sensor_register' :(.text+0x237c00): undefined reference to `thermal_zone_of_sensor_unregister' We need the dependency on THERMAL in order to ensure that this driver becomes a loadable module if the thermal support itself is modular, while the dependency on THERMAL_OF is a runtime dependency and the driver will still build if it is missing. It is entirely possible to build sun4i-ts without THERMAL_OF just to use the hwmon sensors and/or touchscreen. Fixes: 223697107949 ("Input: sun4i-ts - add thermal zone sensor support") Signed-off-by: Arnd Bergmann [wens@csie.org: Fix description and Kconfig dependencies] Signed-off-by: Chen-Yu Tsai Signed-off-by: Dmitry Torokhov

Input: add support for Elan eKTH I2C touchscreens

2014-12-08T07:09:23Z

This driver supports Elan eKTH I2C touchscreen controllers. Note that these are using custom protocol, as opposed to other Elan parts that use HID-over-I2C and are supported by the standard HID-multitouch driver. Signed-off-by: Scott Liu Signed-off-by: Dmitry Torokhov

Input: add driver for the Goodix touchpanel

2014-10-31T16:41:23Z

Add a driver for the Goodix touchscreen panel found in Onda v975w tablets. The driver is based off the Android driver gt9xx.c found in some Android code dumps, but now bears no resemblance to the original driver. The driver was tested on the aforementioned tablet. Signed-off-by: Bastien Nocera Tested-by: Bastien Nocera Signed-off-by: Benjamin Tissoires Signed-off-by: Dmitry Torokhov

Input: Add Microchip AR1021 i2c touchscreen

2014-10-09T22:27:42Z

This patch adds support for the ar1021 i2c based touchscreen. The driver is quite simple and only supports the Touch Reporting Protocol. This is the final version for an RFC patch send a while ago. http://www.spinics.net/lists/linux-input/msg29419.html Signed-off-by: Christian Gmeiner Signed-off-by: Dmitry Torokhov

Input: driver for touchscreen on iPaq h3xxx

2014-07-24T19:39:52Z

This adds a driver for the touchscreen connected to the Atmel microcontroller on the iPAQ h3xxx series. Based on a driver from handhelds.org 2.6.21 kernel, written by Alessandro GARDICH, with the bulk of the code for the new input architecture rewritten by Dmitry Atamonow, and the final polish by Linus Walleij. Signed-off-by: Alessandro GARDICH Signed-off-by: Dmitry Artamonow Signed-off-by: Linus Walleij Signed-off-by: Dmitry Torokhov

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2014-06-10T01:46:02Z

Pull input updates from Dmitry Torokhov: "A big update to the Atmel touchscreen driver, devm support for polled input devices, several drivers have been converted to using managed resources, and assorted driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (87 commits) Input: synaptics - fix resolution for manually provided min/max Input: atmel_mxt_ts - fix invalid return from mxt_get_bootloader_version Input: max8997_haptic - add error handling for regulator and pwm Input: elantech - don't set bit 1 of reg_10 when the no_hw_res quirk is set Input: elantech - deal with clickpads reporting right button events Input: edt-ft5x06 - fix an i2c write for M09 support Input: omap-keypad - remove platform data support ARM: OMAP2+: remove unused omap4-keypad file and code Input: ab8500-ponkey - switch to using managed resources Input: max8925_onkey - switch to using managed resources Input: 88pm860x-ts - switch to using managed resources Input: 88pm860x_onkey - switch to using managed resources Input: intel-mid-touch - switch to using managed resources Input: wacom - process outbound for newer Cintiqs Input: wacom - set stylus_in_proximity when pen is in range DTS: ARM: OMAP3-N900: Add tsc2005 support Input: tsc2005 - add DT support Input: add common DT binding for touchscreens Input: jornada680_kbd - switch top using managed resources Input: adp5520-keys - switch to using managed resources ...

Merge branch 'next' into for-linus

2014-06-08T06:24:07Z

Prepare input updates for 3.16.

Merge tag 'soc-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next

2014-06-02T23:15:12Z

Pull part one of ARM SoC updates from Olof Johansson: "A quite large set of SoC updates this cycle. In no particular order: - Multi-cluster power management for Samsung Exynos, adding support for big.LITTLE CPU switching on EXYNOS5 - SMP support for Marvell Armada 375 and 38x - SMP rework on Allwinner A31 - Xilinx Zynq support for SOC_BUS, big endian - Marvell orion5x platform cleanup, modernizing the implementation and moving to DT. - _Finally_ moving Samsung Exynos over to support MULTIPLATFORM, so that their platform can be enabled in the same kernel binary as most of the other v7 platforms in the tree. \o/ The work isn't quite complete, there's some driver fixes still needed, but the basics now work. New SoC support added: - Freescale i.MX6SX - LSI Axxia AXM55xx SoCs - Samsung EXYNOS 3250, 5260, 5410, 5420 and 5800 - STi STIH407 plus a large set of various smaller updates for different platforms. I'm probably missing some important one here" * tag 'soc-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (281 commits) ARM: exynos: don't run exynos4 l2x0 setup on other platforms ARM: exynos: Fix "allmodconfig" build errors in mcpm and hotplug ARM: EXYNOS: mcpm rename the power_down_finish ARM: EXYNOS: Enable mcpm for dual-cluster exynos5800 SoC ARM: EXYNOS: Enable multi-platform build support ARM: EXYNOS: Consolidate Kconfig entries ARM: EXYNOS: Add support for EXYNOS5410 SoC ARM: EXYNOS: Support secondary CPU boot of Exynos3250 ARM: EXYNOS: Add Exynos3250 SoC ID ARM: EXYNOS: Add 5800 SoC support ARM: EXYNOS: initial board support for exynos5260 SoC clk: exynos5410: register clocks using common clock framework ARM: debug: qcom: add UART addresses to Kconfig help for APQ8084 ARM: sunxi: allow building without reset controller Documentation: devicetree: arm: sort enable-method entries ARM: rockchip: convert smp bringup to CPU_METHOD_OF_DECLARE clk: exynos5250: Add missing sysmmu clocks for DISP and ISP blocks ARM: dts: axxia: Add reset controller power: reset: Add Axxia system reset driver ARM: axxia: Adding defconfig for AXM55xx ...

Input: add common DT binding for touchscreens

2014-05-29T07:05:59Z

Add common DT binding documentation for touchscreen devices and implement input_parse_touchscreen_of_params, which parses the common properties and configures the input device accordingly. The method currently does not interpret the axis inversion properties, since there is no matching flag in the generic linux input device. Reviewed-by: Pavel Machek Acked-by: Aaro Koskinen Signed-off-by: Sebastian Reichel Signed-off-by: Dmitry Torokhov

Input: atmel_mxt_ts - select FW_LOADER for firmware code

2014-05-19T06:27:23Z

Signed-off-by: Nick Dyer Acked-by: Benson Leung Acked-by: Yufeng Shen Signed-off-by: Dmitry Torokhov