linux/drivers/input/touchscreen/Kconfig, branch v4.7

Merge tag 'mfd-for-linus-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

2016-03-18T17:15:11Z

Pull MFD updates from Lee Jones: "New Drivers: - Freescale Touch Screen ADC - X-Powers AXP PMIC with RSB - TI TPS65086 Power Management IC (PMIC) New Device Support: - Supply device PCI IDs for Intel Broxton Fix-ups: - Move to clkdev_create() API; intel_quark_i2c_gpio - Complete re-write of TI's TPS65912 Power Management IC (PMIC) - Remove unnecessary function argument; axp20x - Separate out bus related code; axp20x - Coding Style changes; axp20x - Allow more drivers to be compiled as modules - Work around false positive 'used uninitialised' warning; db8500-prcmu Bug Fixes: - Remove do_div(); fsl-imx25-gcq - Fix driver init when built-in; tps65010 - Fix clock-unregister leak; intel-lpss" * tag 'mfd-for-linus-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (53 commits) mfd: intel-lpss: Pass I2C configuration via properties on BXT mfd: imx6sx: Add PCIe register definitions for iomuxc gpr mfd: ipaq-micro: Use __maybe_unused to hide pm functions mfd: max77686: Add max77802 to I2C device ID table mfd: max77686: Export OF module alias information mfd: max77686: Allow driver to be built as a module mfd: stmpe: Add the proper PWM resources mfd: tps65090: Set regmap config reg counts properly mfd: syscon: Return ENOTSUPP instead of ENOSYS when disabled mfd: as3711: Set regmap config reg counts properly mfd: rc5t583: Set regmap config reg counts properly gpio: tps65086: Add GPO driver for the TPS65086 PMIC mfd: mt6397: Add platform device ID table mfd: da9063: Fix missing volatile registers in the core regmap_range volatile lists mfd: mt6397: Add MT6323 support to MT6397 driver mfd: mt6397: Add support for different Slave types mfd: mt6397: int_con and int_status may vary in location dt-bindings: mfd: Add bindings for the MediaTek MT6323 PMIC mfd: da9062: Fix missing volatile registers in the core regmap_range volatile lists mfd: Add documentation for ACT8945A DT bindings ...

Merge tag 'v4.5' into next

2016-03-15T23:54:45Z

Merge with Linux 4.5 to get PROPERTY_ENTRY_INTEGER() that is needed to fix pxa/raumfeld rotary encoder properties.

Input: ts4800 - add hardware dependency

2016-03-04T20:04:07Z

The Technologic Systems TS-4800 is an i.MX515 board, so its drivers are useless unless building a SOC_IMX51 kernel, except for build testing purposes. Signed-off-by: Jean Delvare Signed-off-by: Dmitry Torokhov

Input: add MELFAS MIP4 Touchscreen driver

2016-02-17T19:16:12Z

This is an input driver for MELFAS MIP4 Touchscreen devices, such as MMS400, MMS500, MCS8000, MIT200, MIT300, MIT400, MFS10. All devices implementing MIP4 protocol (MELFAS Interface Protocol Version 4) should be supported by this driver. Signed-off-by: Sangwon Jee Signed-off-by: Dmitry Torokhov

Input: touchscreen: Add imx25 TCQ driver

2016-02-11T15:40:42Z

This is a driver for the imx25 ADC/TSC module. It controls the touchscreen conversion queue and creates a touchscreen input device. The driver currently only supports 4 wire touchscreens. The driver uses a simple conversion queue of precharge, touch detection, X measurement, Y measurement, precharge and another touch detection. This driver uses the regmap from the parent to setup some touch specific settings in the core driver and setup a idle configuration with touch detection. Signed-off-by: Markus Pargmann Signed-off-by: Denis Carikli [fix clock's period calculation] [fix calculation of the 'settling' value] Signed-off-by: Juergen Borleis Acked-by: Dmitry Torokhov Signed-off-by: Lee Jones

Input: Allow compile test of Goodix and Colibri VF50 if !GPIOLIB

2016-02-09T23:18:48Z

The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer functionality only, can still be compiled if GPIOLIB is not enabled. If COMPILE_TEST is enabled, relax the dependency on GPIOLIB for the recently introduced or relaxed symbols TOUCHSCREEN_GOODIX and TOUCHSCREEN_COLIBRI_VF50. Signed-off-by: Geert Uytterhoeven Signed-off-by: Dmitry Torokhov

Merge tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2016-01-21T02:03:56Z

Pull ARM SoC multiplatform code updates from Arnd Bergmann: "This branch is the culmination of 5 years of effort to bring the ARMv6 and ARMv7 platforms together such that they can all be enabled and boot the same kernel. It has been a tremendous amount of cleanup and refactoring by a huge number of people, and creation of several new (and major) subsystems to better abstract out all the platform details in an appropriate manner. The bulk of this branch is a large patchset from Arnd that brings several of the more minor and older platforms we have closer to multiplatform support. Among these are MMP, S3C64xx, Orion5x, mv78xx0 and realview Much of this is moving around header files from old mach directories, but there are also some cleanup patches of debug_ll (lowlevel debug per-platform options) and other parts. Linus Walleij also has some patchs to clean up the older ARM Realview platforms by finally introducing DT support, and Rob Herring has some for ARM Versatile which is now DT-only. Both of these platforms are now multiplatform. Finally, a couple of patches from Russell for Dove PMU, and a fix from Valentin Rothberg for Exynos ADC, which were rebased on top of the series to avoid conflicts" * tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (75 commits) ARM: realview: don't select SMP_ON_UP for UP builds ARM: s3c: simplify s3c_irqwake_{e,}intallow definition ARM: s3c64xx: fix pm-debug compilation iio: exynos-adc: fix irqf_oneshot.cocci warnings ARM: realview: build realview-dt SMP support only when used ARM: realview: select apropriate targets ARM: realview: clean up header files ARM: realview: make all header files local ARM: no longer make CPU targets visible separately ARM: integrator: use explicit core module options ARM: realview: enable multiplatform ARM: make default platform work for NOMMU ARM: debug-ll: move DEBUG_LL_UART_EFM32 to correct Kconfig location ARM: defconfig: use correct debug_ll settings ARM: versatile: convert to multi-platform ARM: versatile: merge mach code into a single file ARM: versatile: switch to DT only booting and remove legacy code ARM: versatile: add DT based PCI detection ARM: pxa: mark ezx structures as __maybe_unused ARM: pxa: mark raumfeld init functions as __maybe_unused ...

Merge branch 'goodix' into next

2016-01-07T01:31:06Z

Merge several improvements to Goodix touchscreen driver: - power management support - configuration upload - axis swapping and inversion

Input: goodix - reset device at init

2015-12-18T01:11:52Z

After power on, it is recommended that the driver resets the device. The reset procedure timing is described in the datasheet and is used at device init (before writing device configuration) and for power management. It is a sequence of setting the interrupt and reset pins high/low at specific timing intervals. This procedure also includes setting the slave address to the one specified in the ACPI/device tree. This is based on Goodix datasheets for GT911 and GT9271 and on Goodix driver gt9xx.c for Android (publicly available in Android kernel trees for various devices). For reset the driver needs to control the interrupt and reset gpio pins (configured through ACPI/device tree). For devices that do not have the gpio pins properly declared, the functionality depending on these pins will not be available, but the device can still be used with basic functionality. For both device tree and ACPI, the interrupt gpio pin configuration is read from the "irq-gpios" property and the reset pin configuration is read from the "reset-gpios" property. For ACPI 5.1, named properties can be specified using the _DSD section. This functionality will not be available for devices that use indexed gpio pins declared in the _CRS section (we need to provide backward compatibility with devices that do not support using the interrupt gpio pin as output). For ACPI, the pins can be specified using ACPI 5.1: Device (STAC) { Name (_HID, "GDIX1001") ... Method (_CRS, 0, Serialized) { Name (RBUF, ResourceTemplate () { I2cSerialBus (0x0014, ControllerInitiated, 0x00061A80, AddressingMode7Bit, "\\I2C0", 0x00, ResourceConsumer, , ) GpioInt (Edge, ActiveHigh, Exclusive, PullNone, 0x0000, "\\I2C0", 0x00, ResourceConsumer, , ) { // Pin list 0 } GpioIo (Exclusive, PullDown, 0x0000, 0x0000, IoRestrictionOutputOnly, "\\I2C0", 0x00, ResourceConsumer, , ) { 1 } }) Return (RBUF) } Name (_DSD, Package () { ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package (2) {"irq-gpios", Package() {^STAC, 0, 0, 0 }}, Package (2) {"reset-gpios", Package() {^STAC, 1, 0, 0 }}, ... } } Signed-off-by: Octavian Purdila Signed-off-by: Irina Tirdea Acked-by: Rob Herring Acked-by: Bastien Nocera Tested-by: Bastien Nocera Tested-by: Aleksei Mamlin Signed-off-by: Dmitry Torokhov

Input: add touchscreen support for TS-4800

2015-12-16T22:00:51Z

On this board, the touchscreen, an ads7843, is not handled directly by Linux but by a companion FPGA. This FPGA is memory-mapped and the IP design is very similar to the mk712. This commit adds the support for this IP. Signed-off-by: Damien Riegel Acked-by: Rob Herring Signed-off-by: Dmitry Torokhov