linux/drivers/input/touchscreen, branch v5.19

Merge tag 'input-for-v5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2022-07-17T14:52:46Z

Pull input fixes from Dmitry Torokhov: - fix Goodix driver to properly behave on the Aya Neo Next - some more sanity checks in usbtouchscreen driver - a tweak in wm97xx driver in preparation for remove() to return void - a clarification in input core regarding units of measurement for resolution on touch events. * tag 'input-for-v5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: document the units for resolution of size axes Input: goodix - call acpi_device_fix_up_power() in some cases Input: wm97xx - make .remove() obviously always return 0 Input: usbtouchscreen - add driver_info sanity check

Input: goodix - call acpi_device_fix_up_power() in some cases

2022-07-09T04:54:17Z

On ACPI boards, when we cannot get the GPIOs to do a reset ourselves if necessary, call acpi_device_fix_up_power() to force the ACPI _PS0 method to run. On some devices without proper GPIO descriptions this will reset the touchscreen for us and this may be necessary for us to be able to communicate to the touchscreen at all. Specifically on an Aya Neo Next this change will cause the _PS0() ACPI function to call INIT() which does: Method (INIT, 0, Serialized) { TP_I = 0x00A50000 TP_R = 0x00A50000 Sleep (0x0A) TP_I = 0x00E50000 Sleep (One) TP_R = 0x00E50000 Sleep (0x06) TP_I = 0x00A50000 Sleep (0x3C) TP_I = 0x00041800 } On older kernels the ACPI core assumed a power-on was necessary by itself and would run _PS0 before our probe function runs, which can be seen from the GPIO pin ctrl registers in /sys/kernel/debug/gpio which match the above hex values with older kernels. With newer kernels before this change the GPIO pin ctrl registers do not match, indicating INIT() has not run and probing the touchscreen fails. This change makes Linux run _PS0() again fixing the touchscreen not working on the Aya Neo Next. Reported-and-tested-by: Maya Matuszczyk Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20220618210233.208027-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov

Input: wm97xx - make .remove() obviously always return 0

2022-07-08T20:19:53Z

wm97xx_remove() returns zero unconditionally. To prepare changing the prototype for platform remove callbacks to return void, make it explicit that wm97xx_mfd_remove() always returns zero. The prototype for wm97xx_remove cannot be changed, as it's also used as a plain device remove callback. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20220708062718.240013-1-u.kleine-koenig@pengutronix.de Signed-off-by: Dmitry Torokhov

Input: usbtouchscreen - add driver_info sanity check

2022-06-27T22:27:37Z

Add a sanity check on the device id-table driver_info field to make sure we never access a type structure (and function pointers) outside of the device info array (e.g. if someone fails to ifdef a device-id entry). Note that this also suppresses a compiler warning with -Warray-bounds (gcc-11.3.0) when compile-testing the driver without enabling any of the device type Kconfig options: drivers/input/touchscreen/usbtouchscreen.c: In function 'usbtouch_probe': drivers/input/touchscreen/usbtouchscreen.c:1668:16:warning: array subscript is outside array bounds of 'struct usbtouch_device_info[0]' [-Warray-bounds] 1668 | type = &usbtouch_dev_info[id->driver_info]; Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20220623062446.16944-1-johan@kernel.org Signed-off-by: Dmitry Torokhov

Merge tag 'arm-multiplatform-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2022-06-02T22:23:54Z

Pull more ARM multiplatform updates from Arnd Bergmann: "The second part of the multiplatform changes now converts the Intel/Marvell PXA platform along with the rest. The patches went through several rebases before the merge window as bugs were found, so they remained separate. This has to touch a lot of drivers, in particular the touchscreen, pcmcia, sound and clk bits, to detach the driver files from the platform and board specific header files" * tag 'arm-multiplatform-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits) ARM: pxa/mmp: remove traces of plat-pxa ARM: pxa: convert to multiplatform ARM: pxa/sa1100: move I/O space to PCI_IOBASE ARM: pxa: remove support for MTD_XIP ARM: pxa: move mach/*.h to mach-pxa/ ARM: PXA: fix multi-cpu build of xsc3 ARM: pxa: move plat-pxa to drivers/soc/ ARM: mmp: rename pxa_register_device ARM: mmp: remove tavorevb board support ARM: pxa: remove unused mach/bitfield.h ARM: pxa: move clk register definitions to driver ARM: pxa: move smemc register access from clk to platform cpufreq: pxa3: move clk register access to clk driver ARM: pxa: remove get_clk_frequency_khz() ARM: pxa: pcmcia: move smemc configuration back to arch ASoC: pxa: i2s: use normal MMIO accessors ASoC: pxa: ac97: use normal MMIO accessors ASoC: pxa: use pdev resource for FIFO regs Input: wm97xx - get rid of irq_enable method in wm97xx_mach_ops Input: wm97xx - switch to using threaded IRQ ...

Merge tag 'input-for-v5.19-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2022-05-28T21:05:54Z

Pull input updates from Dmitry Torokhov: - a new driver for the Azoteq IQS7222A/B/C capacitive touch controller - a new driver for Raspberry Pi Sense HAT joystick - sun4i-lradc-keys gained support of R329 and D1 variants, plus it can be now used as a wakeup source - pm8941-pwrkey can now properly handle PON GEN3 variants; the driver also implements software debouncing and has a workaround for missing key press events - assorted driver fixes and cleanups * tag 'input-for-v5.19-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (29 commits) Input: stmfts - do not leave device disabled in stmfts_input_open Input: gpio-keys - cancel delayed work only in case of GPIO Input: cypress_ps2 - fix typo in comment Input: vmmouse - disable vmmouse before entering suspend mode dt-bindings: google,cros-ec-keyb: Fixup bad compatible match Input: cros-ec-keyb - allow skipping keyboard registration dt-bindings: google,cros-ec-keyb: Introduce switches only compatible Input: psmouse-smbus - avoid flush_scheduled_work() usage Input: bcm-keypad - remove unneeded NULL check before clk_disable_unprepare Input: sparcspkr - fix refcount leak in bbc_beep_probe Input: sun4i-lradc-keys - add support for R329 and D1 Input: sun4i-lradc-keys - add optional clock/reset support dt-bindings: input: sun4i-lradc-keys: Add R329 and D1 compatibles Input: sun4i-lradc-keys - add wakeup support Input: pm8941-pwrkey - simulate missed key press events Input: pm8941-pwrkey - add software key press debouncing support Input: pm8941-pwrkey - add support for PON GEN3 base addresses Input: pm8941-pwrkey - fix error message Input: synaptics-rmi4 - remove unnecessary flush_workqueue() Input: ep93xx_keypad - use devm_platform_ioremap_resource() helper ...

Merge branch 'next' into for-linus

2022-05-27T22:48:45Z

Prepare input updates for 5.19 merge window.

Input: stmfts - do not leave device disabled in stmfts_input_open

2022-05-26T16:57:07Z

The commit 26623eea0da3 attempted to deal with potential leak of runtime PM counter when opening the touchscreen device, however it ended up erroneously dropping the counter in the case of successfully enabling the device. Let's address this by using pm_runtime_resume_and_get() and then executing pm_runtime_put_sync() only when we fail to send "sense on" command to the device. Fixes: 26623eea0da3 ("Input: stmfts - fix reference leak in stmfts_input_open") Reported-by: Pavel Machek Signed-off-by: Dmitry Torokhov

Merge tag 'input-for-v5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2022-05-21T23:58:43Z

Pull input fixes from Dmitry Torokhov: "A small fixup to ili210x touchscreen driver, and updated maintainer entry for the device tree binding of Mediatek 6779 keypad: - fix reset timing of Ilitek touchscreens - update maintainer entry of DT binding of Mediatek 6779 keypad" * tag 'input-for-v5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: ili210x - use one common reset implementation Input: ili210x - fix reset timing dt-bindings: input: mediatek,mt6779-keypad: update maintainer

Merge branch 'ib/5.17-cros-ec-keyb' into next

2022-05-18T22:02:27Z

Merge changes to ChromeOS EC Keyboard driver.