linux/drivers/input, branch v5.11

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2021-02-06T22:57:23Z

Pull input fixes from Dmitry Torokhov: "Nothing terribly interesting, just a few fixups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: xpad - sync supported devices with fork on GitHub Input: ariel-pwrbutton - remove unused variable ariel_pwrbutton_id_table Input: goodix - add support for Goodix GT9286 chip dt-bindings: input: touchscreen: goodix: Add binding for GT9286 IC dt-bindings: input: adc-keys: clarify description Input: ili210x - implement pressure reporting for ILI251x Input: i8042 - unbreak Pegatron C15B Input: st1232 - wait until device is ready before reading resolution Input: st1232 - do not read more bytes than needed Input: st1232 - fix off-by-one error in resolution handling

Input: xpad - sync supported devices with fork on GitHub

2021-01-25T02:21:17Z

There is a fork of this driver on GitHub [0] that has been updated with new device IDs. Merge those into the mainline driver, so the out-of-tree fork is not needed for users of those devices anymore. [0] https://github.com/paroj/xpad Signed-off-by: Benjamin Valentin Link: https://lore.kernel.org/r/20210121142523.1b6b050f@rechenknecht2k11 Signed-off-by: Dmitry Torokhov

Input: ariel-pwrbutton - remove unused variable ariel_pwrbutton_id_table

2021-01-12T03:42:35Z

Kernel test robot throws below warning -> >> drivers/input/misc/ariel-pwrbutton.c:152:35: warning: unused variable >> 'ariel_pwrbutton_id_table' [-Wunused-const-variable] static const struct spi_device_id ariel_pwrbutton_id_table[] = { ^ 1 warning generated. Remove unused variable ariel_pwrbutton_id_table[] if no plan to use it further. Reported-by: kernel test robot Signed-off-by: Souptick Joarder Reviewed-by: Lubomir Rintel Link: https://lore.kernel.org/r/1608581041-4354-1-git-send-email-jrdr.linux@gmail.com Signed-off-by: Dmitry Torokhov

Input: goodix - add support for Goodix GT9286 chip

2021-01-10T06:23:45Z

The Goodix GT9286 is a capacitive touch sensor IC based on GT1x. This chip can be found on a number of smartphones, including the F(x)tec Pro 1 and the Elephone U. This has been tested on F(x)Tec Pro1 (MSM8998). Signed-off-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/r/20210109135512.149032-2-angelogioacchino.delregno@somainline.org Reviewed-by: Bastien Nocera Signed-off-by: Dmitry Torokhov

Input: ili210x - implement pressure reporting for ILI251x

2021-01-04T02:03:39Z

The ILI251x seems to report pressure information in the 5th byte of each per-finger touch data element. On the available hardware, this information has the values ranging from 0x0 to 0xa, which is also matching the downstream example code. Report pressure information on the ILI251x. Signed-off-by: Marek Vasut Link: https://lore.kernel.org/r/20201224071238.160098-1-marex@denx.de Signed-off-by: Dmitry Torokhov

Input: i8042 - unbreak Pegatron C15B

2021-01-04T02:03:37Z

g++ reports drivers/input/serio/i8042-x86ia64io.h:225:3: error: ‘.matches’ designator used multiple times in the same initializer list C99 semantics is that last duplicated initialiser wins, so DMI entry gets overwritten. Fixes: a48491c65b51 ("Input: i8042 - add ByteSpeed touchpad to noloop table") Signed-off-by: Alexey Dobriyan Acked-by: Po-Hsu Lin Link: https://lore.kernel.org/r/20201228072335.GA27766@localhost.localdomain Signed-off-by: Dmitry Torokhov

Input: st1232 - wait until device is ready before reading resolution

2021-01-02T06:19:03Z

According to the st1232 datasheet, the host has to wait for the device to change into Normal state before accessing registers other than the Status Register. If the reset GPIO is wired, the device is powered on during driver probe, just before reading the resolution. However, the latter may happen before the device is ready, leading to a probe failure: st1232-ts 1-0055: Failed to read resolution: -6 Fix this by waiting until the device is ready, by trying to read the Status Register until it indicates so, or until timeout. On Armadillo 800 EVA, typically the first read fails with an I2C transfer error, while the second read indicates the device is ready. Fixes: 3a54a215410b1650 ("Input: st1232 - add support resolution reading") Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/20201229162601.2154566-4-geert+renesas@glider.be Signed-off-by: Dmitry Torokhov

Input: st1232 - do not read more bytes than needed

2021-01-02T06:19:02Z

st1232_ts_read_data() already reads ts->read_buf_len bytes (8 or 20 bytes) from the touchscreen controller. This was fine when it was used to read touch point coordinates only, but is overkill for reading the touchscreen resolution, which just needs 3 bytes. Optimize transfers by passing the wanted number of bytes. Fixes: 3a54a215410b1650 ("Input: st1232 - add support resolution reading") Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/20201229162601.2154566-3-geert+renesas@glider.be Signed-off-by: Dmitry Torokhov

Input: st1232 - fix off-by-one error in resolution handling

2021-01-02T06:19:00Z

Before, the maximum coordinates were fixed to (799, 479) or (319, 479), depending on touchscreen controller type. The driver was changed to read the actual values from the touchscreen controller, but did not take into account the returned values are not the maximum coordinates, but the touchscreen resolution (e.g. 800 and 480). Fix this by subtracting 1. Fixes: 3a54a215410b1650 ("Input: st1232 - add support resolution reading") Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/20201229162601.2154566-2-geert+renesas@glider.be Signed-off-by: Dmitry Torokhov

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2020-12-16T00:18:23Z

Pull input updates from Dmitry Torokhov: - support for inhibiting input devices at request from userspace. If a device implements open/close methods, it can also put device into low power state. This is needed, for example, to disable keyboard and touchpad on convertibles when they are transitioned into tablet mode - now that ordinary input devices can be configured for polling mode, dedicated input polling device implementation has been removed - GTCO tablet driver has been removed, as it used problematic custom HID parser, devices are EOL, and there is no interest from the manufacturer - a new driver for Dialog DA7280 haptic chips has been introduced - a new driver for power button on Dell Wyse 3020 - support for eKTF2132 in ektf2127 driver - support for SC2721 and SC2730 in sc27xx-vibra driver - enhancements for Atmel touchscreens, AD7846 touchscreens, Elan touchpads, ADP5589, ST1232 touchscreen, TM2 touchkey drivers - fixes and cleanups to allow clean builds with W=1 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (86 commits) Input: da7280 - fix spelling mistake "sequemce" -> "sequence" Input: cyapa_gen6 - fix out-of-bounds stack access Input: sc27xx - add support for sc2730 and sc2721 dt-bindings: input: Add compatible string for SC2721 and SC2730 dt-bindings: input: Convert sc27xx-vibra.txt to json-schema Input: stmpe - add axis inversion and swapping capability Input: adp5589-keys - do not explicitly control IRQ for wakeup Input: adp5589-keys - do not unconditionally configure as wakeup source Input: ipx4xx-beeper - convert comma to semicolon Input: parkbd - convert comma to semicolon Input: new da7280 haptic driver dt-bindings: input: Add document bindings for DA7280 MAINTAINERS: da7280 updates to the Dialog Semiconductor search terms Input: elantech - fix protocol errors for some trackpoints in SMBus mode Input: elan_i2c - add new trackpoint report type 0x5F Input: elants - document some registers and values Input: atmel_mxt_ts - simplify the return expression of mxt_send_bootloader_cmd() Input: imx_keypad - add COMPILE_TEST support Input: applespi - use new structure for SPI transfer delays Input: synaptics-rmi4 - use new structure for SPI transfer delays ...