linux/drivers/input, branch v5.19

Merge tag 'input-for-v5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2022-07-17T14:52:46Z

Pull input fixes from Dmitry Torokhov: - fix Goodix driver to properly behave on the Aya Neo Next - some more sanity checks in usbtouchscreen driver - a tweak in wm97xx driver in preparation for remove() to return void - a clarification in input core regarding units of measurement for resolution on touch events. * tag 'input-for-v5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: document the units for resolution of size axes Input: goodix - call acpi_device_fix_up_power() in some cases Input: wm97xx - make .remove() obviously always return 0 Input: usbtouchscreen - add driver_info sanity check

Input: goodix - call acpi_device_fix_up_power() in some cases

2022-07-09T04:54:17Z

On ACPI boards, when we cannot get the GPIOs to do a reset ourselves if necessary, call acpi_device_fix_up_power() to force the ACPI _PS0 method to run. On some devices without proper GPIO descriptions this will reset the touchscreen for us and this may be necessary for us to be able to communicate to the touchscreen at all. Specifically on an Aya Neo Next this change will cause the _PS0() ACPI function to call INIT() which does: Method (INIT, 0, Serialized) { TP_I = 0x00A50000 TP_R = 0x00A50000 Sleep (0x0A) TP_I = 0x00E50000 Sleep (One) TP_R = 0x00E50000 Sleep (0x06) TP_I = 0x00A50000 Sleep (0x3C) TP_I = 0x00041800 } On older kernels the ACPI core assumed a power-on was necessary by itself and would run _PS0 before our probe function runs, which can be seen from the GPIO pin ctrl registers in /sys/kernel/debug/gpio which match the above hex values with older kernels. With newer kernels before this change the GPIO pin ctrl registers do not match, indicating INIT() has not run and probing the touchscreen fails. This change makes Linux run _PS0() again fixing the touchscreen not working on the Aya Neo Next. Reported-and-tested-by: Maya Matuszczyk Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20220618210233.208027-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov

Input: wm97xx - make .remove() obviously always return 0

2022-07-08T20:19:53Z

wm97xx_remove() returns zero unconditionally. To prepare changing the prototype for platform remove callbacks to return void, make it explicit that wm97xx_mfd_remove() always returns zero. The prototype for wm97xx_remove cannot be changed, as it's also used as a plain device remove callback. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20220708062718.240013-1-u.kleine-koenig@pengutronix.de Signed-off-by: Dmitry Torokhov

Input: usbtouchscreen - add driver_info sanity check

2022-06-27T22:27:37Z

Add a sanity check on the device id-table driver_info field to make sure we never access a type structure (and function pointers) outside of the device info array (e.g. if someone fails to ifdef a device-id entry). Note that this also suppresses a compiler warning with -Warray-bounds (gcc-11.3.0) when compile-testing the driver without enabling any of the device type Kconfig options: drivers/input/touchscreen/usbtouchscreen.c: In function 'usbtouch_probe': drivers/input/touchscreen/usbtouchscreen.c:1668:16:warning: array subscript is outside array bounds of 'struct usbtouch_device_info[0]' [-Warray-bounds] 1668 | type = &usbtouch_dev_info[id->driver_info]; Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20220623062446.16944-1-johan@kernel.org Signed-off-by: Dmitry Torokhov

Merge tag 'input-for-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2022-06-07T22:00:29Z

Pull input fixes from Dmitry Torokhov: - proper annotation of USB buffers in bcm5974 touchpad dirver - a quirk in SOC button driver to handle Lenovo Yoga Tablet2 1051F - a fix for missing dependency in raspberrypi-ts driver to avoid compile breakages with random configs. * tag 'input-for-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: soc_button_array - also add Lenovo Yoga Tablet2 1051F to dmi_use_low_level_irq Input: bcm5974 - set missing URB_NO_TRANSFER_DMA_MAP urb flag Input: raspberrypi-ts - add missing HAS_IOMEM dependency

Input: soc_button_array - also add Lenovo Yoga Tablet2 1051F to dmi_use_low_level_irq

2022-06-07T20:44:41Z

Commit 223f61b8c5ad ("Input: soc_button_array - add Lenovo Yoga Tablet2 1051L to the dmi_use_low_level_irq list") added the 1051L to this list already, but the same problem applies to the 1051F. As there are no further 1051 variants (just the F/L), we can just DMI match 1051. Tested on a Lenovo Yoga Tablet2 1051F: Without this patch the home-button stops working after a wakeup from suspend. Signed-off-by: Marius Hoch Reviewed-by: Hans de Goede Link: https://lore.kernel.org/r/20220603120246.3065-1-mail@mariushoch.de Signed-off-by: Dmitry Torokhov

Input: bcm5974 - set missing URB_NO_TRANSFER_DMA_MAP urb flag

2022-06-07T20:44:39Z

The bcm5974 driver does the allocation and dma mapping of the usb urb data buffer, but driver does not set the URB_NO_TRANSFER_DMA_MAP flag to let usb core know the buffer is already mapped. usb core tries to map the already mapped buffer, causing a warning: "xhci_hcd 0000:00:14.0: rejecting DMA map of vmalloc memory" Fix this by setting the URB_NO_TRANSFER_DMA_MAP, letting usb core know buffer is already mapped by bcm5974 driver Signed-off-by: Mathias Nyman Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=215890 Link: https://lore.kernel.org/r/20220606113636.588955-1-mathias.nyman@linux.intel.com Signed-off-by: Dmitry Torokhov

Merge tag 'for-linus-5.19-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

2022-06-04T20:42:53Z

Pull more xen updates from Juergen Gross: "Two cleanup patches for Xen related code and (more important) an update of MAINTAINERS for Xen, as Boris Ostrovsky decided to step down" * tag 'for-linus-5.19-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: replace xen_remap() with memremap() MAINTAINERS: Update Xen maintainership xen: switch gnttab_end_foreign_access() to take a struct page pointer

Merge tag 'usb-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2022-06-03T18:17:49Z

Pull USB / Thunderbolt updates from Greg KH: "Here is the "big" set of USB and Thunderbolt driver changes for 5.18-rc1. For the most part it's been a quiet development cycle for the USB core, but there are the usual "hot spots" of development activity. Included in here are: - Thunderbolt driver updates: - fixes for devices without displayport adapters - lane bonding support and improvements - other minor changes based on device testing - dwc3 gadget driver changes. It seems this driver will never be finished given that the IP core is showing up in zillions of new devices and each implementation decides to do something different with it... - uvc gadget driver updates as more devices start to use and rely on this hardware as well - usb_maxpacket() api changes to remove an unneeded and unused parameter. - usb-serial driver device id updates and small cleanups - typec cleanups and fixes based on device testing - device tree updates for usb properties - lots of other small fixes and driver updates. All of these have been in linux-next for weeks with no reported problems" * tag 'usb-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits) USB: new quirk for Dell Gen 2 devices usb: dwc3: core: Add error log when core soft reset failed usb: dwc3: gadget: Move null pinter check to proper place usb: hub: Simplify error and success path in port_over_current_notify usb: cdns3: allocate TX FIFO size according to composite EP number usb: dwc3: Fix ep0 handling when getting reset while doing control transfer usb: Probe EHCI, OHCI controllers asynchronously usb: isp1760: Fix out-of-bounds array access xhci: Don't defer primary roothub registration if there is only one roothub USB: serial: option: add Quectel BG95 modem USB: serial: pl2303: fix type detection for odd device xhci: Allow host runtime PM as default for Intel Alder Lake N xHCI xhci: Remove quirk for over 10 year old evaluation hardware xhci: prevent U2 link power state if Intel tier policy prevented U1 xhci: use generic command timer for stop endpoint commands. usb: host: xhci-plat: omit shared hcd if either root hub has no ports usb: host: xhci-plat: prepare operation w/o shared hcd usb: host: xhci-plat: create shared hcd after having added main hcd xhci: prepare for operation w/o shared hcd xhci: factor out parts of xhci_gen_setup() ...

Merge tag 'arm-multiplatform-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2022-06-02T22:23:54Z

Pull more ARM multiplatform updates from Arnd Bergmann: "The second part of the multiplatform changes now converts the Intel/Marvell PXA platform along with the rest. The patches went through several rebases before the merge window as bugs were found, so they remained separate. This has to touch a lot of drivers, in particular the touchscreen, pcmcia, sound and clk bits, to detach the driver files from the platform and board specific header files" * tag 'arm-multiplatform-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits) ARM: pxa/mmp: remove traces of plat-pxa ARM: pxa: convert to multiplatform ARM: pxa/sa1100: move I/O space to PCI_IOBASE ARM: pxa: remove support for MTD_XIP ARM: pxa: move mach/*.h to mach-pxa/ ARM: PXA: fix multi-cpu build of xsc3 ARM: pxa: move plat-pxa to drivers/soc/ ARM: mmp: rename pxa_register_device ARM: mmp: remove tavorevb board support ARM: pxa: remove unused mach/bitfield.h ARM: pxa: move clk register definitions to driver ARM: pxa: move smemc register access from clk to platform cpufreq: pxa3: move clk register access to clk driver ARM: pxa: remove get_clk_frequency_khz() ARM: pxa: pcmcia: move smemc configuration back to arch ASoC: pxa: i2s: use normal MMIO accessors ASoC: pxa: ac97: use normal MMIO accessors ASoC: pxa: use pdev resource for FIFO regs Input: wm97xx - get rid of irq_enable method in wm97xx_mach_ops Input: wm97xx - switch to using threaded IRQ ...