linux/drivers/interconnect/qcom, branch v5.14

Revert "interconnect: qcom: icc-rpmh: Add BCMs to commit list in pre_aggregate"

2021-08-12T06:24:39Z

This reverts commit f84f5b6f72e68bbaeb850b58ac167e4a3a47532a, which is causing regressions on some platforms, preventing them to boot or do a clean reboot. This is because the above commit is sending also all the zero bandwidth requests to turn off any resources that might be enabled unnecessarily, but currently this may turn off interconnects that are enabled by default, but with no consumer to keep them on. Let's revert this for now as some platforms are not ready for such change yet. In the future we can introduce some _ignore_unused option that could keep also the unused resources on platforms that have only partial interconnect support and also add .shutdown callbacks to deal with disabling the resources in the right order. Reported-by: Stephen Boyd Reported-by: Bjorn Andersson Link: https://lore.kernel.org/r/CAE-0n52iVgX0JjjnYi=NDg49xP961p=+W5R2bmO+2xwRceFhfA@mail.gmail.com Signed-off-by: Georgi Djakov

interconnect: qcom: icc-rpmh: Add BCMs to commit list in pre_aggregate

2021-07-30T13:52:21Z

We're only adding BCMs to the commit list in aggregate(), but there are cases where pre_aggregate() is called without subsequently calling aggregate(). In particular, in icc_sync_state() when a node with initial BW has zero requests. Since BCMs aren't added to the commit list in these cases, we don't actually send the zero BW request to HW. So the resources remain on unnecessarily. Add BCMs to the commit list in pre_aggregate() instead, which is always called even when there are no requests. Fixes: 976daac4a1c5 ("interconnect: qcom: Consolidate interconnect RPMh support") Signed-off-by: Mike Tipton Link: https://lore.kernel.org/r/20210721175432.2119-5-mdtipton@codeaurora.org Signed-off-by: Georgi Djakov

interconnect: qcom: icc-rpmh: Ensure floor BW is enforced for all nodes

2021-07-30T13:50:40Z

We currently only enforce BW floors for a subset of nodes in a path. All BCMs that need updating are queued in the pre_aggregate/aggregate phase. The first set() commits all queued BCMs and subsequent set() calls short-circuit without committing anything. Since the floor BW isn't set in sum_avg/max_peak until set(), then some BCMs are committed before their associated nodes reflect the floor. Set the floor as each node is being aggregated. This ensures that all all relevant floors are set before the BCMs are committed. Fixes: 266cd33b5913 ("interconnect: qcom: Ensure that the floor bandwidth value is enforced") Signed-off-by: Mike Tipton Link: https://lore.kernel.org/r/20210721175432.2119-4-mdtipton@codeaurora.org [georgi: Removed unused variable] Signed-off-by: Georgi Djakov

Merge tag 'icc-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next

2021-06-22T20:03:25Z

Georgi writes: interconnect changes for 5.14 Here are changes for the 5.14-rc1 merge window consisting of interconnect driver updates. Driver changes: - New driver for SC7280 platforms. Signed-off-by: Georgi Djakov * tag 'icc-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc: interconnect: qcom: Add SC7280 interconnect provider driver dt-bindings: interconnect: Add Qualcomm SC7280 DT bindings

interconnect: qcom: Add SC7280 interconnect provider driver

2021-05-11T08:53:31Z

Add driver for the Qualcomm interconnect buses found in SC7280 based platforms. The topology consists of several NoCs that are controlled by a remote processor that collects the aggregated bandwidth for each master-slave pairs. Signed-off-by: Odelu Kukatla Link: https://lore.kernel.org/r/1619517059-12109-3-git-send-email-okukatla@codeaurora.org Signed-off-by: Georgi Djakov

interconnect: qcom: Add missing MODULE_DEVICE_TABLE

2021-05-11T04:26:31Z

This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module. Reported-by: Hulk Robot Signed-off-by: Zou Wei Link: https://lore.kernel.org/r/1620704673-104205-1-git-send-email-zou_wei@huawei.com Fixes: 976daac4a1c5 ("interconnect: qcom: Consolidate interconnect RPMh support") Signed-off-by: Georgi Djakov

interconnect: qcom: bcm-voter: add a missing of_node_put()

2021-05-11T04:22:52Z

Add a missing of_node_put() in of_bcm_voter_get() to avoid the reference leak. Signed-off-by: Subbaraman Narayanamurthy Reviewed-by: Matthias Kaehlcke Link: https://lore.kernel.org/r/1619116570-13308-1-git-send-email-subbaram@codeaurora.org Fixes: 976daac4a1c5 ("interconnect: qcom: Consolidate interconnect RPMh support") Signed-off-by: Georgi Djakov

Merge tag 'cfi-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

2021-04-27T17:16:46Z

Pull CFI on arm64 support from Kees Cook: "This builds on last cycle's LTO work, and allows the arm64 kernels to be built with Clang's Control Flow Integrity feature. This feature has happily lived in Android kernels for almost 3 years[1], so I'm excited to have it ready for upstream. The wide diffstat is mainly due to the treewide fixing of mismatched list_sort prototypes. Other things in core kernel are to address various CFI corner cases. The largest code portion is the CFI runtime implementation itself (which will be shared by all architectures implementing support for CFI). The arm64 pieces are Acked by arm64 maintainers rather than coming through the arm64 tree since carrying this tree over there was going to be awkward. CFI support for x86 is still under development, but is pretty close. There are a handful of corner cases on x86 that need some improvements to Clang and objtool, but otherwise works well. Summary: - Clean up list_sort prototypes (Sami Tolvanen) - Introduce CONFIG_CFI_CLANG for arm64 (Sami Tolvanen)" * tag 'cfi-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: arm64: allow CONFIG_CFI_CLANG to be selected KVM: arm64: Disable CFI for nVHE arm64: ftrace: use function_nocfi for ftrace_call arm64: add __nocfi to __apply_alternatives arm64: add __nocfi to functions that jump to a physical address arm64: use function_nocfi with __pa_symbol arm64: implement function_nocfi psci: use function_nocfi for cpu_resume lkdtm: use function_nocfi treewide: Change list_sort to use const pointers bpf: disable CFI in dispatcher functions kallsyms: strip ThinLTO hashes from static functions kthread: use WARN_ON_FUNCTION_MISMATCH workqueue: use WARN_ON_FUNCTION_MISMATCH module: ensure __cfi_check alignment mm: add generic function_nocfi macro cfi: add __cficanonical add support for Clang CFI

Merge tag 'icc-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next

2021-04-15T09:06:46Z

Georgi writes: interconnect changes for 5.13 These are the interconnect changes for the 5.13-rc1 merge window with the highlights being drivers for two new platforms. Driver changes: - New driver for SM8350 platforms. - New driver for SDM660 platforms. Signed-off-by: Georgi Djakov * tag 'icc-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc: interconnect: qcom: sm8350: Add missing link between nodes interconnect: qcom: sm8350: Use the correct ids interconnect: qcom: sdm660: Fix kerneldoc warning MAINTAINERS: icc: add interconnect tree interconnect: qcom: Add SM8350 interconnect provider driver dt-bindings: interconnect: Add Qualcomm SM8350 DT bindings interconnect: qcom: icc-rpm: record slave RPM id in error log interconnect: qcom: Add SDM660 interconnect provider driver dt-bindings: interconnect: Add bindings for Qualcomm SDM660 NoC

treewide: Change list_sort to use const pointers

2021-04-08T23:04:22Z

list_sort() internally casts the comparison function passed to it to a different type with constant struct list_head pointers, and uses this pointer to call the functions, which trips indirect call Control-Flow Integrity (CFI) checking. Instead of removing the consts, this change defines the list_cmp_func_t type and changes the comparison function types of all list_sort() callers to use const pointers, thus avoiding type mismatches. Suggested-by: Nick Desaulniers Signed-off-by: Sami Tolvanen Reviewed-by: Nick Desaulniers Reviewed-by: Christoph Hellwig Reviewed-by: Kees Cook Tested-by: Nick Desaulniers Tested-by: Nathan Chancellor Signed-off-by: Kees Cook Link: https://lore.kernel.org/r/20210408182843.1754385-10-samitolvanen@google.com