linux/drivers/interconnect, branch v5.8

interconnect: msm8916: Fix buswidth of pcnoc_s nodes

2020-07-23T08:45:24Z

The buswidth of the pcnoc_s_* nodes is actually not 8, but 4 bytes. Let's fix it. Reported-by: Jun Nie Reviewed-by: Mike Tipton Fixes: 30c8fa3ec61a ("interconnect: qcom: Add MSM8916 interconnect provider driver") Link: https://lore.kernel.org/r/20200709130004.12462-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov Cc: stable Link: https://lore.kernel.org/r/20200723083735.5616-3-georgi.djakov@linaro.org Signed-off-by: Greg Kroah-Hartman

interconnect: Do not skip aggregation for disabled paths

2020-07-23T08:45:24Z

When an interconnect path is being disabled, currently we don't aggregate the requests for it afterwards. But the re-aggregation step shouldn't be skipped, as it may leave the nodes with outdated bandwidth data. This outdated data may actually keep the path still enabled and prevent the device from going into lower power states. Reported-by: Atul Dhudase Fixes: 7d374b209083 ("interconnect: Add helpers for enabling/disabling a path") Reviewed-by: Sibi Sankar Tested-by: Atul Dhudase Reviewed-by: Atul Dhudase Link: https://lore.kernel.org/r/20200721120740.3436-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov Link: https://lore.kernel.org/r/20200723083735.5616-2-georgi.djakov@linaro.org Signed-off-by: Greg Kroah-Hartman

Merge tag 'pm-5.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2020-06-10T21:04:39Z

Pull more power management updates from Rafael Wysocki: "These are operating performance points (OPP) framework updates mostly, including support for interconnect bandwidth in the OPP core, plus a few cpufreq changes, including boost support in the CPPC cpufreq driver, an ACPI device power management fix and a hibernation code cleanup. Specifics: - Add support for interconnect bandwidth to the OPP core (Georgi Djakov, Saravana Kannan, Sibi Sankar, Viresh Kumar). - Add support for regulator enable/disable to the OPP core (Kamil Konieczny). - Add boost support to the CPPC cpufreq driver (Xiongfeng Wang). - Make the tegra186 cpufreq driver set the CPUFREQ_NEED_INITIAL_FREQ_CHECK flag (Mian Yousaf Kaukab). - Prevent the ACPI power management from using power resources with devices where the list of power resources for power state D0 (full power) is missing (Rafael Wysocki). - Annotate a hibernation-related function with __init (Christophe JAILLET)" * tag 'pm-5.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: PM: Avoid using power resources if there are none for D0 cpufreq: CPPC: add SW BOOST support cpufreq: change '.set_boost' to act on one policy PM: hibernate: Add __init annotation to swsusp_header_init() opp: Don't parse icc paths unnecessarily opp: Remove bandwidth votes when target_freq is zero opp: core: add regulators enable and disable opp: Reorder the code for !target_freq case opp: Expose bandwidth information via debugfs cpufreq: dt: Add support for interconnect bandwidth scaling opp: Update the bandwidth on OPP frequency changes opp: Add sanity checks in _read_opp_key() opp: Add support for parsing interconnect bandwidth cpufreq: tegra186: add CPUFREQ_NEED_INITIAL_FREQ_CHECK flag OPP: Add helpers for reading the binding properties dt-bindings: opp: Introduce opp-peak-kBps and opp-avg-kBps bindings

Merge branch 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm

2020-06-01T10:54:18Z

Pull operating performance points (OPP) framework changes for v5.8 from Viresh Kumar: "This contains: - support for interconnect bandwidth in the OPP core (Georgi Djakov, Saravana Kannan, Sibi Sankar, Viresh Kumar). - support for regulator enable/disable (Kamil Konieczny). This is based on three patches from the interconnect tree which shall get merged via Greg's tree." * 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: opp: Don't parse icc paths unnecessarily opp: Remove bandwidth votes when target_freq is zero opp: core: add regulators enable and disable opp: Reorder the code for !target_freq case opp: Expose bandwidth information via debugfs cpufreq: dt: Add support for interconnect bandwidth scaling opp: Update the bandwidth on OPP frequency changes opp: Add sanity checks in _read_opp_key() opp: Add support for parsing interconnect bandwidth interconnect: Remove unused module exit code from core interconnect: Disallow interconnect core to be built as a module interconnect: Add of_icc_get_by_index() helper function OPP: Add helpers for reading the binding properties dt-bindings: opp: Introduce opp-peak-kBps and opp-avg-kBps bindings

opp: Expose bandwidth information via debugfs

2020-05-29T04:45:12Z

Expose the bandwidth information as well via debugfs. Signed-off-by: Viresh Kumar Signed-off-by: Georgi Djakov

Merge tag 'icc-5.8-rc1' of https://git.linaro.org/people/georgi.djakov/linux into char-misc-next

2020-05-22T07:14:03Z

Georgi writes: interconnect changes for 5.8 These are the interconnect changes for the 5.8-rc1 merge window: Core changes: - Convert the framework core from tristate to bool to make handling dependencies between other core frameworks easier - Add of_icc_get_by_index() - Add devm_of_icc_get() helper function - Add icc_enable() and icc_disable() helpers New drivers: - Platform driver for NXP i.MX8MM SoC - Platform driver for NXP i.MX8MN SoC - Platform driver for NXP i.MX8MQ SoC Signed-off-by: Georgi Djakov * tag 'icc-5.8-rc1' of https://git.linaro.org/people/georgi.djakov/linux: interconnect: Remove unused module exit code from core interconnect: Disallow interconnect core to be built as a module interconnect: Add of_icc_get_by_index() helper function interconnect: Add helpers for enabling/disabling a path interconnect: imx: Fix return value check in imx_icc_node_init_qos() interconnect: imx: Add platform driver for imx8mn interconnect: imx: Add platform driver for imx8mq interconnect: imx: Add platform driver for imx8mm interconnect: Add imx core driver dt-bindings: interconnect: Add bindings for imx8m noc interconnect: Add devm_of_icc_get() as exported API for users

Merge branch 'icc-get-by-index' into icc-next

2020-05-15T07:46:18Z

This is an immutable branch shared with the OPP tree. It contains also the patches to convert the interconnect framework from tristate to bool after Greg agreed with that. This will make the integration between the OPP layer and interconnect much easier. * icc-get-by-index: interconnect: Add of_icc_get_by_index() helper function interconnect: Disallow interconnect core to be built as a module interconnect: Remove unused module exit code from core Signed-off-by: Georgi Djakov

interconnect: Remove unused module exit code from core

2020-05-15T07:40:11Z

The interconnect core is currently always built in: menuconfig INTERCONNECT bool "On-Chip Interconnect management support" So remove the module_exit function and symbolically rename module_init to device_initcall to drive home the point. Signed-off-by: Jordan Crouse Reviewed-by: Bjorn Andersson Link: https://lore.kernel.org/r/1572546532-19248-3-git-send-email-jcrouse@codeaurora.org Signed-off-by: Georgi Djakov

interconnect: Disallow interconnect core to be built as a module

2020-05-15T07:34:45Z

Building individual drivers as modules is fine but allowing a core framework to be built as a module makes it really complex and should be avoided. Whatever uses the interconnect core APIs must also be built as a module if interconnect core is built as module, else we will see compilation failures. If another core framework (like cpufreq, clk, etc), that can't be built as module, needs to use interconnect APIs then we will start seeing compilation failures with allmodconfig configurations as the symbols (like of_icc_get()) used in other frameworks will not be available in the built-in image. Disallow the interconnect core to be built as a module to avoid all these issues. Signed-off-by: Viresh Kumar Reviewed-by: Bjorn Andersson Link: https://lore.kernel.org/r/b789cce388dd1f2906492f307dea6780c398bc6a.1567065991.git.viresh.kumar@linaro.org Signed-off-by: Georgi Djakov

interconnect: Add of_icc_get_by_index() helper function

2020-05-13T11:06:32Z

This is the same as the traditional of_icc_get() function, but the difference is that it takes index as an argument, instead of name. Reviewed-by: Matthias Kaehlcke Reviewed-by: Sibi Sankar Link: https://lore.kernel.org/r/20200512125327.1868-4-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov