linux/drivers/md/raid0.c, branch v6.0

md: Don't set mddev private to NULL in raid0 pers->free

2022-05-23T06:07:21Z

In normal stop process, it does like this: do_md_stop | __md_stop (pers->free(); mddev->private=NULL) | md_free (free mddev) __md_stop sets mddev->private to NULL after pers->free. The raid device will be stopped and mddev memory is free. But in reshape, it doesn't free the mddev and mddev will still be used in new raid. In reshape, it first sets mddev->private to new_pers and then runs old_pers->free(). Now raid0 sets mddev->private to NULL in raid0_free. The new raid can't work anymore. It will panic when dereference mddev->private because of NULL pointer dereference. It can panic like this: [63010.814972] kernel BUG at drivers/md/raid10.c:928! [63010.819778] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [63010.825011] CPU: 3 PID: 44437 Comm: md0_resync Kdump: loaded Not tainted 5.14.0-86.el9.x86_64 #1 [63010.833789] Hardware name: Dell Inc. PowerEdge R6415/07YXFK, BIOS 1.15.0 09/11/2020 [63010.841440] RIP: 0010:raise_barrier+0x161/0x170 [raid10] [63010.865508] RSP: 0018:ffffc312408bbc10 EFLAGS: 00010246 [63010.870734] RAX: 0000000000000000 RBX: ffffa00bf7d39800 RCX: 0000000000000000 [63010.877866] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffa00bf7d39800 [63010.884999] RBP: 0000000000000000 R08: fffffa4945e74400 R09: 0000000000000000 [63010.892132] R10: ffffa00eed02f798 R11: 0000000000000000 R12: ffffa00bbc435200 [63010.899266] R13: ffffa00bf7d39800 R14: 0000000000000400 R15: 0000000000000003 [63010.906399] FS: 0000000000000000(0000) GS:ffffa00eed000000(0000) knlGS:0000000000000000 [63010.914485] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [63010.920229] CR2: 00007f5cfbe99828 CR3: 0000000105efe000 CR4: 00000000003506e0 [63010.927363] Call Trace: [63010.929822] ? bio_reset+0xe/0x40 [63010.933144] ? raid10_alloc_init_r10buf+0x60/0xa0 [raid10] [63010.938629] raid10_sync_request+0x756/0x1610 [raid10] [63010.943770] md_do_sync.cold+0x3e4/0x94c [63010.947698] md_thread+0xab/0x160 [63010.951024] ? md_write_inc+0x50/0x50 [63010.954688] kthread+0x149/0x170 [63010.957923] ? set_kthread_struct+0x40/0x40 [63010.962107] ret_from_fork+0x22/0x30 Removing the code that sets mddev->private to NULL in raid0 can fix problem. Fixes: 0c031fd37f69 (md: Move alloc/free acct bioset in to personality) Reported-by: Fine Fan Signed-off-by: Xiao Ni Signed-off-by: Song Liu

md: remove most calls to bdevname

2022-05-23T06:07:21Z

Use the %pg format specifier to save on stack consumption and code size. Signed-off-by: Christoph Hellwig Signed-off-by: Song Liu

md/raid0: Ignore RAID0 layout if the second zone has only one device

2022-04-25T21:00:37Z

The RAID0 layout is irrelevant if all members have the same size so the array has only one zone. It is *also* irrelevant if the array has two zones and the second zone has only one device, for example if the array has two members of different sizes. So in that case it makes sense to allow assembly even when the layout is undefined, like what is done when the array has only one zone. Reviewed-by: NeilBrown Signed-off-by: Pascal Hambourg Signed-off-by: Song Liu

block: remove QUEUE_FLAG_DISCARD

2022-04-18T01:49:59Z

Just use a non-zero max_discard_sectors as an indicator for discard support, similar to what is done for write zeroes. The only places where needs special attention is the RAID5 driver, which must clear discard support for security reasons by default, even if the default stacking rules would allow for it. Signed-off-by: Christoph Hellwig Reviewed-by: Martin K. Petersen Acked-by: Christoph Böhmwalder [drbd] Acked-by: Jan Höppner [s390] Acked-by: Coly Li [bcache] Acked-by: David Sterba [btrfs] Reviewed-by: Chaitanya Kulkarni Link: https://lore.kernel.org/r/20220415045258.199825-25-hch@lst.de Signed-off-by: Jens Axboe

scsi: md: Remove WRITE_SAME support

2022-02-23T02:11:08Z

There are no more end-users of REQ_OP_WRITE_SAME left, so we can start deleting it. Link: https://lore.kernel.org/r/20220209082828.2629273-6-hch@lst.de Signed-off-by: Christoph Hellwig Signed-off-by: Martin K. Petersen

md: Move alloc/free acct bioset in to personality

2022-01-06T16:37:03Z

bioset acct is only needed for raid0 and raid5. Therefore, md_run only allocates it for raid0 and raid5. However, this does not cover personality takeover, which may cause uninitialized bioset. For example, the following repro steps: mdadm -CR /dev/md0 -l1 -n2 /dev/loop0 /dev/loop1 mdadm --wait /dev/md0 mkfs.xfs /dev/md0 mdadm /dev/md0 --grow -l5 mount /dev/md0 /mnt causes panic like: [ 225.933939] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 225.934903] #PF: supervisor instruction fetch in kernel mode [ 225.935639] #PF: error_code(0x0010) - not-present page [ 225.936361] PGD 0 P4D 0 [ 225.936677] Oops: 0010 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN PTI [ 225.937525] CPU: 27 PID: 1133 Comm: mount Not tainted 5.16.0-rc3+ #706 [ 225.938416] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.module_el8.4.0+547+a85d02ba 04/01/2014 [ 225.939922] RIP: 0010:0x0 [ 225.940289] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. [ 225.941196] RSP: 0018:ffff88815897eff0 EFLAGS: 00010246 [ 225.941897] RAX: 0000000000000000 RBX: 0000000000092800 RCX: ffffffff81370a39 [ 225.942813] RDX: dffffc0000000000 RSI: 0000000000000000 RDI: 0000000000092800 [ 225.943772] RBP: 1ffff1102b12fe04 R08: fffffbfff0b43c01 R09: fffffbfff0b43c01 [ 225.944807] R10: ffffffff85a1e007 R11: fffffbfff0b43c00 R12: ffff88810eaaaf58 [ 225.945757] R13: 0000000000000000 R14: ffff88810eaaafb8 R15: ffff88815897f040 [ 225.946709] FS: 00007ff3f2505080(0000) GS:ffff888fb5e00000(0000) knlGS:0000000000000000 [ 225.947814] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 225.948556] CR2: ffffffffffffffd6 CR3: 000000015aa5a006 CR4: 0000000000370ee0 [ 225.949537] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 225.950455] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 225.951414] Call Trace: [ 225.951787] [ 225.952120] mempool_alloc+0xe5/0x250 [ 225.952625] ? mempool_resize+0x370/0x370 [ 225.953187] ? rcu_read_lock_sched_held+0xa1/0xd0 [ 225.953862] ? rcu_read_lock_bh_held+0xb0/0xb0 [ 225.954464] ? sched_clock_cpu+0x15/0x120 [ 225.955019] ? find_held_lock+0xac/0xd0 [ 225.955564] bio_alloc_bioset+0x1ed/0x2a0 [ 225.956080] ? lock_downgrade+0x3a0/0x3a0 [ 225.956644] ? bvec_alloc+0xc0/0xc0 [ 225.957135] bio_clone_fast+0x19/0x80 [ 225.957651] raid5_make_request+0x1370/0x1b70 [ 225.958286] ? sched_clock_cpu+0x15/0x120 [ 225.958797] ? __lock_acquire+0x8b2/0x3510 [ 225.959339] ? raid5_get_active_stripe+0xce0/0xce0 [ 225.959986] ? lock_is_held_type+0xd8/0x130 [ 225.960528] ? rcu_read_lock_sched_held+0xa1/0xd0 [ 225.961135] ? rcu_read_lock_bh_held+0xb0/0xb0 [ 225.961703] ? sched_clock_cpu+0x15/0x120 [ 225.962232] ? lock_release+0x27a/0x6c0 [ 225.962746] ? do_wait_intr_irq+0x130/0x130 [ 225.963302] ? lock_downgrade+0x3a0/0x3a0 [ 225.963815] ? lock_release+0x6c0/0x6c0 [ 225.964348] md_handle_request+0x342/0x530 [ 225.964888] ? set_in_sync+0x170/0x170 [ 225.965397] ? blk_queue_split+0x133/0x150 [ 225.965988] ? __blk_queue_split+0x8b0/0x8b0 [ 225.966524] ? submit_bio_checks+0x3b2/0x9d0 [ 225.967069] md_submit_bio+0x127/0x1c0 [...] Fix this by moving alloc/free of acct bioset to pers->run and pers->free. While we are on this, properly handle md_integrity_register() error in raid0_run(). Fixes: daee2024715d (md: check level before create and exit io_acct_set) Cc: stable@vger.kernel.org Acked-by: Guoqing Jiang Signed-off-by: Xiao Ni Signed-off-by: Song Liu

md: add io accounting for raid0 and raid5

2021-06-15T05:32:06Z

We introduce a new bioset (io_acct_set) for raid0 and raid5 since they don't own clone infrastructure to accounting io. And the bioset is added to mddev instead of to raid0 and raid5 layer, because with this way, we can put common functions to md.h and reuse them in raid0 and raid5. Also struct md_io_acct is added accordingly which includes io start_time, the origin bio and cloned bio. Then we can call bio_{start,end}_io_acct to get related io status. Signed-off-by: Guoqing Jiang Signed-off-by: Song Liu

md: add md_submit_discard_bio() for submitting discard bio

2021-03-24T23:29:06Z

Move these logic from raid0.c to md.c, so that we can also use it in raid10.c. Reviewed-by: Coly Li Reviewed-by: Guoqing Jiang Tested-by: Adrian Huang Signed-off-by: Xiao Ni Signed-off-by: Song Liu

Merge tag 'for-5.11/block-2020-12-14' of git://git.kernel.dk/linux-block

2020-12-16T20:57:51Z

Pull block updates from Jens Axboe: "Another series of killing more code than what is being added, again thanks to Christoph's relentless cleanups and tech debt tackling. This contains: - blk-iocost improvements (Baolin Wang) - part0 iostat fix (Jeffle Xu) - Disable iopoll for split bios (Jeffle Xu) - block tracepoint cleanups (Christoph Hellwig) - Merging of struct block_device and hd_struct (Christoph Hellwig) - Rework/cleanup of how block device sizes are updated (Christoph Hellwig) - Simplification of gendisk lookup and removal of block device aliasing (Christoph Hellwig) - Block device ioctl cleanups (Christoph Hellwig) - Removal of bdget()/blkdev_get() as exported API (Christoph Hellwig) - Disk change rework, avoid ->revalidate_disk() (Christoph Hellwig) - sbitmap improvements (Pavel Begunkov) - Hybrid polling fix (Pavel Begunkov) - bvec iteration improvements (Pavel Begunkov) - Zone revalidation fixes (Damien Le Moal) - blk-throttle limit fix (Yu Kuai) - Various little fixes" * tag 'for-5.11/block-2020-12-14' of git://git.kernel.dk/linux-block: (126 commits) blk-mq: fix msec comment from micro to milli seconds blk-mq: update arg in comment of blk_mq_map_queue blk-mq: add helper allocating tagset->tags Revert "block: Fix a lockdep complaint triggered by request queue flushing" nvme-loop: use blk_mq_hctx_set_fq_lock_class to set loop's lock class blk-mq: add new API of blk_mq_hctx_set_fq_lock_class block: disable iopoll for split bio block: Improve blk_revalidate_disk_zones() checks sbitmap: simplify wrap check sbitmap: replace CAS with atomic and sbitmap: remove swap_lock sbitmap: optimise sbitmap_deferred_clear() blk-mq: skip hybrid polling if iopoll doesn't spin blk-iocost: Factor out the base vrate change into a separate function blk-iocost: Factor out the active iocgs' state check into a separate function blk-iocost: Move the usage ratio calculation to the correct place blk-iocost: Remove unnecessary advance declaration blk-iocost: Fix some typos in comments blktrace: fix up a kerneldoc comment block: remove the request_queue to argument request based tracepoints ...

Revert "md: add md_submit_discard_bio() for submitting discard bio"

2020-12-10T04:46:01Z

This reverts commit 2628089b74d5a64bd0bcb5d247a18f78d7b6f4d0. Matthew Ruffell reported data corruption in raid10 due to the changes in discard handling [1]. Revert these changes before we find a proper fix. [1] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1907262/ Cc: Matthew Ruffell Cc: Xiao Ni Signed-off-by: Song Liu