linux/drivers/media/common, branch master

media: uvcvideo: Add support for P010 pixel format

2026-03-25T08:40:28Z

Add support for the P010 (10-bit Y/UV 4:2:0) pixel format to the uvcvideo driver. This format is exposed by USB capture devices such as the Magewell USB Capture HDMI 4K Pro when capturing HDR10 content. P010 stores 10-bit Y and interleaved UV samples in 16-bit little-endian words, with data in the upper 10 bits and zeros in the lower 6 bits. This requires 2 bytes per sample, so bytesperline is wWidth * 2. V4L2_PIX_FMT_P010 was added to the V4L2 core in commit 5374d8fb75f3 ("media: Add P010 video format"). Based on the community DKMS patch from awawa-dev/P010_for_V4L2. Link: https://github.com/awawa-dev/P010_for_V4L2 Signed-off-by: Oliver Collyer Reviewed-by: Laurent Pinchart Link: https://patch.msgid.link/20251226065718.95504-1-ovcollyer@mac.com Signed-off-by: Laurent Pinchart Signed-off-by: Hans Verkuil

media: rc: fix race between unregister and urb/irq callbacks

2026-03-17T13:43:56Z

Some rc device drivers have a race condition between rc_unregister_device() and irq or urb callbacks. This is because rc_unregister_device() does two things, it marks the device as unregistered so no new commands can be issued and then it calls rc_free_device(). This means the driver has no chance to cancel any pending urb callbacks or interrupts after the device has been marked as unregistered. Those callbacks may access struct rc_dev or its members (e.g. struct ir_raw_event_ctrl), which have been freed by rc_free_device(). This change removes the implicit call to rc_free_device() from rc_unregister_device(). This means that device drivers can call rc_unregister_device() in their remove or disconnect function, then cancel all the urbs and interrupts before explicitly calling rc_free_device(). Note this is an alternative fix for an issue found by Haotian Zhang, see the Closes: tags. Reported-by: Haotian Zhang Closes: https://lore.kernel.org/linux-media/20251114101432.2566-1-vulab@iscas.ac.cn/ Closes: https://lore.kernel.org/linux-media/20251114101418.2548-1-vulab@iscas.ac.cn/ Closes: https://lore.kernel.org/linux-media/20251114101346.2530-1-vulab@iscas.ac.cn/ Closes: https://lore.kernel.org/linux-media/20251114090605.2413-1-vulab@iscas.ac.cn/ Reviewed-by: Patrice Chotard Signed-off-by: Sean Young Signed-off-by: Hans Verkuil

media: videobuf2: Set vma_flags in vb2_dma_sg_mmap

2026-03-16T10:51:55Z

vb2_dma_contig sets VMA flags VM_DONTEXPAND and VM_DONTDUMP and I do not see a reason why vb2_dma_sg should behave differently. This avoids hitting `WARN_ON(!(vma->vm_flags & VM_DONTEXPAND));` in drm_gem_mmap_obj() during mmap() of an imported dma-buf from the out of tree Apple ISP camera capture driver which uses vb2_dma_sg_memops. gst-launch-1.0 v4l2src ! gtk4paintablesink [ 38.201528] ------------[ cut here ]------------ [ 38.202135] WARNING: CPU: 7 PID: 2362 at drivers/gpu/drm/drm_gem.c:1144 drm_gem_mmap_obj+0x1f8/0x210 [ 38.203278] Modules linked in: rfcomm snd_seq_dummy snd_hrtimer snd_seq snd_seq_device uinput nf_conntrack_netbios_ns nf_conntrack_broadcast nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables qrtr bnep nls_ascii i2c_dev loop fuse dm_multipath nfnetlink brcmfmac_wcc hid_magicmouse hci_bcm4377 brcmfmac brcmutil bluetooth ecdh_generic cfg80211 ecc btrfs xor xor_neon rfkill hid_apple raid6_pq joydev aop_als apple_nvmem_spmi industrialio snd_soc_aop apple_z2 snd_soc_cs42l84 tps6598x snd_soc_tas2764 macsmc_reboot spi_nor macsmc_hwmon rtc_macsmc gpio_macsmc macsmc_power regmap_spmi macsmc_input dockchannel_hid panel_summit appledrm nvme_apple dwc3 snd_soc_macaudio drm_client_lib nvme_core phy_apple_atc hwmon apple_sart apple_dockchannel macsmc apple_rtkit_helper spmi_apple_controller aop apple_wdt mfd_core nvmem_apple_efuses pinctrl_apple_gpio apple_isp apple_dcp videobuf2_dma_sg mux_core spi_apple [ 38.203300] videobuf2_memops i2c_pasemi_platform snd_soc_apple_mca videobuf2_v4l2 videodev clk_apple_nco videobuf2_common snd_pcm_dmaengine adpdrm asahi apple_admac adpdrm_mipi drm_dma_helper pwm_apple i2c_pasemi_core drm_display_helper mc cec apple_dart ofpart apple_soc_cpufreq leds_pwm phram [ 38.217677] CPU: 7 UID: 1000 PID: 2362 Comm: gst-launch-1.0 Tainted: G W 6.17.6+ #asahi-dev PREEMPT(full) [ 38.219040] Tainted: [W]=WARN [ 38.219398] Hardware name: Apple MacBook Pro (13-inch, M2, 2022) (DT) [ 38.220213] pstate: 21400005 (nzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 38.221088] pc : drm_gem_mmap_obj+0x1f8/0x210 [ 38.221643] lr : drm_gem_mmap_obj+0x78/0x210 [ 38.222178] sp : ffffc0008dc678e0 [ 38.222579] x29: ffffc0008dc678e0 x28: 0000000000042a97 x27: ffff8000b701b480 [ 38.223465] x26: 00000000000000fb x25: ffffc0008dc67d20 x24: ffffc0008dc67968 [ 38.224402] x23: ffff8000e3ca5600 x22: ffff8000265b7800 x21: ffff80003000c0c0 [ 38.225279] x20: 0000000000000000 x19: ffff8000b68c5200 x18: ffffc0008dc67968 [ 38.226151] x17: 0000000000000000 x16: 0000000000000000 x15: ffffc000810a30a8 [ 38.227042] x14: 00007fff637effff x13: 00005555de91ffff x12: 00007fff63293fff [ 38.227942] x11: 0000000000000000 x10: ffff8000184ecf08 x9 : ffffc0007a1900c8 [ 38.228824] x8 : ffffc0008dc67968 x7 : 0000000000000012 x6 : ffffc0015cf1c000 [ 38.229703] x5 : ffffc0008dc676a0 x4 : ffffc00081a27dc0 x3 : 0000000000000038 [ 38.230607] x2 : 0000000000000003 x1 : 0000000000000003 x0 : 00000000100000fb [ 38.231488] Call trace: [ 38.231806] drm_gem_mmap_obj+0x1f8/0x210 (P) [ 38.232342] drm_gem_mmap+0x140/0x260 [ 38.232813] __mmap_region+0x488/0x9a0 [ 38.233277] mmap_region+0xd0/0x148 [ 38.233703] do_mmap+0x350/0x5c0 [ 38.234148] vm_mmap_pgoff+0x14c/0x200 [ 38.234612] ksys_mmap_pgoff+0x150/0x208 [ 38.235107] __arm64_sys_mmap+0x34/0x50 [ 38.235611] invoke_syscall+0x50/0x120 [ 38.236075] el0_svc_common.constprop.0+0x48/0xf0 [ 38.236680] do_el0_svc+0x24/0x38 [ 38.237113] el0_svc+0x38/0x168 [ 38.237507] el0t_64_sync_handler+0xa0/0xe8 [ 38.238034] el0t_64_sync+0x198/0x1a0 [ 38.238491] ---[ end trace 0000000000000000 ]--- There were discussions in [1] at the end of 2023 that mmap() on imported dma-bufs should not be supported but as of v6.17 drm_gem_shmem_mmap() in drm_gem_shmem_helper.c still supports it. This might affect all gpu or accel drivers using drm_gem_shmem_mmap() or the wrapper drm_gem_shmem_object_mmap(). [1] https://lore.kernel.org/dri-devel/bc7f7844-0aa3-4802-b203-69d58e8be2fa@linux.intel.com/ Cc: stable@vger.kernel.org Fixes: 5ba3f757f059 ("[media] v4l: videobuf2: add DMA scatter/gather allocator") Signed-off-by: Janne Grunau Acked-by: Marek Szyprowski Signed-off-by: Hans Verkuil

media: remove unnecessary module_init/exit functions

2026-03-11T00:05:37Z

Three media drivers have unnecessary module_init and module_exit functions that are empty or just print a message. Remove them. Note that if a module_init function exists, a module_exit function must also exist; otherwise, the module cannot be unloaded. Signed-off-by: Ethan Nelson-Moore Reviewed-by: Laurent Pinchart Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab

Convert more 'alloc_obj' cases to default GFP_KERNEL arguments

2026-02-22T04:03:00Z

This converts some of the visually simpler cases that have been split over multiple lines. I only did the ones that are easy to verify the resulting diff by having just that final GFP_KERNEL argument on the next line. Somebody should probably do a proper coccinelle script for this, but for me the trivial script actually resulted in an assertion failure in the middle of the script. I probably had made it a bit _too_ trivial. So after fighting that far a while I decided to just do some of the syntactically simpler cases with variations of the previous 'sed' scripts. The more syntactically complex multi-line cases would mostly really want whitespace cleanup anyway. Signed-off-by: Linus Torvalds

Convert 'alloc_obj' family to use the new default GFP_KERNEL argument

2026-02-22T01:09:51Z

This was done entirely with mindless brute force, using git grep -l '\

treewide: Replace kmalloc with kmalloc_obj for non-scalar types

2026-02-21T09:02:28Z

This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook

media: vb2: drop wait_prepare/finish callbacks

2025-12-18T10:14:57Z

Drop the wait_prepare/finish callbacks. Instead require that the vb2_queue lock field is always set and use that lock when waiting for buffers to arrive. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: vb2: remove vb2_ops_wait_prepare/finish helpers

2025-12-18T10:14:57Z

Since vb2 now relies on the presence of the vb2_queue lock field and there are no more drivers that use these helpers, it is safe to drop them. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

Merge tag 'v6.18-rc5' into media-next

2025-11-11T11:44:28Z

Linux 6.18-rc5 * tag 'v6.18-rc5': (1016 commits) Linux 6.18-rc5 kbuild: Let kernel-doc.py use PYTHON3 override rtc: rx8025: fix incorrect register reference Revert "drm/nouveau: set DMA mask before creating the flush page" io_uring: fix regbuf vector size truncation compiler_types: Move unused static inline functions warning to W=2 smb: client: validate change notify buffer before copy tracing/tools: Fix incorrcet short option in usage text for --threads drm/xe: Enforce correct user fence signaling order using x86/microcode/AMD: Add more known models to entry sign checking drm/xe: Do clean shutdown also when using flr drm/xe: Move declarations under conditional branch drm/xe/guc: Synchronize Dead CT worker with unbind tracing: Fix memory leaks in create_field_var() ring-buffer: Do not warn in ring_buffer_map_get_reader() when reader catches up tracing: tprobe-events: Fix to put tracepoint_user when disable the tprobe tracing: tprobe-events: Fix to register tracepoint correctly gpio: tb10x: Drop unused tb10x_set_bits() function drm/amd/display: Enable mst when it's detected but yet to be initialized drm/amdgpu: Fix wait after reset sequence in S3 ...