linux/drivers/media/dvb-core, branch v3.17

[media] af9035: new IDs: add support for PCTV 78e and PCTV 79e

2014-09-04T15:24:19Z

add the following IDs USB_PID_PCTV_78E (0x025a) for PCTV 78e USB_PID_PCTV_79E (0x0262) for PCTV 79e For these it9135 devices. Signed-off-by: Malcolm Priestley Cc: Antti Palosaari Cc: # v3.14+ Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

2014-08-06T16:38:14Z

Pull networking updates from David Miller: "Highlights: 1) Steady transitioning of the BPF instructure to a generic spot so all kernel subsystems can make use of it, from Alexei Starovoitov. 2) SFC driver supports busy polling, from Alexandre Rames. 3) Take advantage of hash table in UDP multicast delivery, from David Held. 4) Lighten locking, in particular by getting rid of the LRU lists, in inet frag handling. From Florian Westphal. 5) Add support for various RFC6458 control messages in SCTP, from Geir Ola Vaagland. 6) Allow to filter bridge forwarding database dumps by device, from Jamal Hadi Salim. 7) virtio-net also now supports busy polling, from Jason Wang. 8) Some low level optimization tweaks in pktgen from Jesper Dangaard Brouer. 9) Add support for ipv6 address generation modes, so that userland can have some input into the process. From Jiri Pirko. 10) Consolidate common TCP connection request code in ipv4 and ipv6, from Octavian Purdila. 11) New ARP packet logger in netfilter, from Pablo Neira Ayuso. 12) Generic resizable RCU hash table, with intial users in netlink and nftables. From Thomas Graf. 13) Maintain a name assignment type so that userspace can see where a network device name came from (enumerated by kernel, assigned explicitly by userspace, etc.) From Tom Gundersen. 14) Automatic flow label generation on transmit in ipv6, from Tom Herbert. 15) New packet timestamping facilities from Willem de Bruijn, meant to assist in measuring latencies going into/out-of the packet scheduler, latency from TCP data transmission to ACK, etc" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1536 commits) cxgb4 : Disable recursive mailbox commands when enabling vi net: reduce USB network driver config options. tg3: Modify tg3_tso_bug() to handle multiple TX rings amd-xgbe: Perform phy connect/disconnect at dev open/stop amd-xgbe: Use dma_set_mask_and_coherent to set DMA mask net: sun4i-emac: fix memory leak on bad packet sctp: fix possible seqlock seadlock in sctp_packet_transmit() Revert "net: phy: Set the driver when registering an MDIO bus device" cxgb4vf: Turn off SGE RX/TX Callback Timers and interrupts in PCI shutdown routine team: Simplify return path of team_newlink bridge: Update outdated comment on promiscuous mode net-timestamp: ACK timestamp for bytestreams net-timestamp: TCP timestamping net-timestamp: SCHED timestamp on entering packet scheduler net-timestamp: add key to disambiguate concurrent datagrams net-timestamp: move timestamp flags out of sk_flags net-timestamp: extend SCM_TIMESTAMPING ancillary data struct cxgb4i : Move stray CPL definitions to cxgb4 driver tcp: reduce spurious retransmits due to transient SACK reneging qlcnic: Initialize dcbnl_ops before register_netdev ...

[media] media: dvb-core add new flag exit flag value for resume

2014-07-26T14:20:10Z

Some fe drivers will have to do additional initialization in their fe ops.init interfaces when called during resume. Without the additional initialization, fe and tuner driver resume fails. A new fe exit flag value DVB_FE_DEVICE_RESUME is necessary to detect resume case. This patch adds a new define and changes dvb_frontend_resume() to set it prior to calling fe init and tuner init calls and resets it back to DVB_FE_NO_EXIT once fe and tuner init is done. Signed-off-by: Shuah Khan Signed-off-by: Mauro Carvalho Chehab

[media] media: dvb-core move fe exit flag from fepriv to fe for driver access

2014-07-26T14:17:15Z

Some fe drivers attempt to access the device for power control from their release routines. When release routines are called after device is disconnected, the attempts fail. fe drivers should avoid accessing the device, from their release interfaces when called from disconnect path. dvb-frontend maintains exit flag to keep track when fe device is disconnected in its private data structures. Export the flag in fe to enable drivers to check the device status from their release interfaces. Signed-off-by: Shuah Khan Signed-off-by: Mauro Carvalho Chehab

[media] rtl28xxu: add [1b80:d3b0] Sveon STV21

2014-07-26T13:52:28Z

Added Sveon STV21 device based on Realtek RTL2832U and FC0013 tuner Signed-off-by: Sebastian Kemper Acked-by: Antti Palosaari Reviewed-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab

net: set name_assign_type in alloc_netdev()

2014-07-15T23:12:48Z

Extend alloc_netdev{,_mq{,s}}() to take name_assign_type as argument, and convert all users to pass NET_NAME_UNKNOWN. Coccinelle patch: @@ expression sizeof_priv, name, setup, txqs, rxqs, count; @@ ( -alloc_netdev_mqs(sizeof_priv, name, setup, txqs, rxqs) +alloc_netdev_mqs(sizeof_priv, name, NET_NAME_UNKNOWN, setup, txqs, rxqs) | -alloc_netdev_mq(sizeof_priv, name, setup, count) +alloc_netdev_mq(sizeof_priv, name, NET_NAME_UNKNOWN, setup, count) | -alloc_netdev(sizeof_priv, name, setup) +alloc_netdev(sizeof_priv, name, NET_NAME_UNKNOWN, setup) ) v9: move comments here from the wrong commit Signed-off-by: Tom Gundersen Reviewed-by: David Herrmann Signed-off-by: David S. Miller

[media] cxusb: TechnoTrend CT2-4400 USB DVB-T2/C tuner support

2014-07-15T00:07:07Z

USB ID 0b48:3014. USB interface: Cypress CY7C68013A-56LTXC Demodulator: Silicon Labs Si2168-30 Tuner: Silicon Labs Si2158-20 Cc: Michael Krufky Signed-off-by: Olli Salonen Reviewed-by: Antti Palosaari Signed-off-by: Antti Palosaari Reviewed-by: Michael Ira Krufky Signed-off-by: Mauro Carvalho Chehab

[media] dvbdev: add a dvb_detach() macro

2014-06-17T15:04:47Z

The dvb_attach() was unbalanced, as there was no dvb_dettach. Ok, on current cases, the dettach is done by dvbdev, but that are some future corner cases where we may need to do this before registering the frontend. So, add a dvb_detach() and use it at dvb_frontend.c. Signed-off-by: Mauro Carvalho Chehab

[media] az6027: Added the PID for a new revision of the Elgato EyeTV Sat DVB-S Tuner

2014-05-25T18:49:35Z

There is another clone of AZ6027. This patch adds the relevant PID. Signed-off-by: Manuel Schönlaub Signed-off-by: Mauro Carvalho Chehab

[media] rtl28xxu: add [1b80:d3af] Sveon STV27

2014-05-13T23:25:47Z

Added support for Sveon STV27 device (rtl2832u + FC0013 tuner) Signed-off-by: Alessandro Miceli Signed-off-by: Antti Palosaari Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab