linux/drivers/mfd, branch v4.14

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

dmi: Mark all struct dmi_system_id instances const

2017-09-14T09:59:30Z

... and __initconst if applicable. Based on similar work for an older kernel in the Grsecurity patch. [JD: fix toshiba-wmi build] [JD: add htcpen] [JD: move __initconst where checkscript wants it] Signed-off-by: Christoph Hellwig Signed-off-by: Jean Delvare

Merge tag 'mfd-next-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

2017-09-07T20:51:13Z

Pull MFD updates from Lee Jones: "New Drivers - RK805 Power Management IC (PMIC) - ROHM BD9571MWV-M MFD Power Management IC (PMIC) - Texas Instruments TPS68470 Power Management IC (PMIC) & LEDs New Device Support: - Add support for HiSilicon Hi6421v530 to hi6421-pmic-core - Add support for X-Powers AXP806 to axp20x - Add support for X-Powers AXP813 to axp20x - Add support for Intel Sunrise Point LPSS to intel-lpss-pci New Functionality: - Amend API to provide register layout; atmel-smc Fix-ups: - DT re-work; omap, nokia - Header file location change {I2C => MFD}; dm355evm_msp, tps65010 - Fix chip ID formatting issue(s); rk808 - Optionally register touchscreen devices; da9052-core - Documentation improvements; twl-core - Constification; rtsx_pcr, ab8500-core, da9055-i2c, da9052-spi - Drop unnecessary static declaration; max8925-i2c - Kconfig changes (missing deps and remove module support) - Slim down oversized licence statement; hi6421-pmic-core - Use managed resources (devm_*); lp87565 - Supply proper error checking/handling; t7l66xb Bug Fixes: - Fix counter duplication issue; da9052-core - Fix potential NULL deference issue; max8998 - Leave SPI-NOR write-protection bit alone; lpc_ich - Ensure device is put into reset during suspend; intel-lpss - Correct register offset variable size; omap-usb-tll" * tag 'mfd-next-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (61 commits) mfd: intel_soc_pmic: Differentiate between Bay and Cherry Trail CRC variants mfd: intel_soc_pmic: Export separate mfd-cell configs for BYT and CHT dt-bindings: mfd: Add bindings for ZII RAVE devices mfd: omap-usb-tll: Fix register offsets mfd: da9052: Constify spi_device_id mfd: intel-lpss: Put I2C and SPI controllers into reset state on suspend mfd: da9055: Constify i2c_device_id mfd: intel-lpss: Add missing PCI ID for Intel Sunrise Point LPSS devices mfd: t7l66xb: Handle return value of clk_prepare_enable mfd: Add ROHM BD9571MWV-M PMIC DT bindings mfd: intel_soc_pmic_chtwc: Turn Kconfig option into a bool mfd: lp87565: Convert to use devm_mfd_add_devices() mfd: Add support for TPS68470 device mfd: lpc_ich: Do not touch SPI-NOR write protection bit on Haswell/Broadwell mfd: syscon: atmel-smc: Add helper to retrieve register layout mfd: axp20x: Use correct platform device ID for many PEK dt-bindings: mfd: axp20x: Introduce bindings for AXP813 mfd: axp20x: Add support for AXP813 PMIC dt-bindings: mfd: axp20x: Add AXP806 to supported list of chips mfd: Add ROHM BD9571MWV-M MFD PMIC driver ...

Merge tag 'pm-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2017-09-05T19:19:08Z

Pull power management updates from Rafael Wysocki: "This time (again) cpufreq gets the majority of changes which mostly are driver updates (including a major consolidation of intel_pstate), some schedutil governor modifications and core cleanups. There also are some changes in the system suspend area, mostly related to diagnostics and debug messages plus some renames of things related to suspend-to-idle. One major change here is that suspend-to-idle is now going to be preferred over S3 on systems where the ACPI tables indicate to do so and provide requsite support (the Low Power Idle S0 _DSM in particular). The system sleep documentation and the tools related to it are updated too. The rest is a few cpuidle changes (nothing major), devfreq updates, generic power domains (genpd) framework updates and a few assorted modifications elsewhere. Specifics: - Drop the P-state selection algorithm based on a PID controller from intel_pstate and make it use the same P-state selection method (based on the CPU load) for all types of systems in the active mode (Rafael Wysocki, Srinivas Pandruvada). - Rework the cpufreq core and governors to make it possible to take cross-CPU utilization updates into account and modify the schedutil governor to actually do so (Viresh Kumar). - Clean up the handling of transition latency information in the cpufreq core and untangle it from the information on which drivers cannot do dynamic frequency switching (Viresh Kumar). - Add support for new SoCs (MT2701/MT7623 and MT7622) to the mediatek cpufreq driver and update its DT bindings (Sean Wang). - Modify the cpufreq dt-platdev driver to autimatically create cpufreq devices for the new (v2) Operating Performance Points (OPP) DT bindings and update its whitelist of supported systems (Viresh Kumar, Shubhrajyoti Datta, Marc Gonzalez, Khiem Nguyen, Finley Xiao). - Add support for Ux500 to the cpufreq-dt driver and drop the obsolete dbx500 cpufreq driver (Linus Walleij, Arnd Bergmann). - Add new SoC (R8A7795) support to the cpufreq rcar driver (Khiem Nguyen). - Fix and clean up assorted issues in the cpufreq drivers and core (Arvind Yadav, Christophe Jaillet, Colin Ian King, Gustavo Silva, Julia Lawall, Leonard Crestez, Rob Herring, Sudeep Holla). - Update the IO-wait boost handling in the schedutil governor to make it less aggressive (Joel Fernandes). - Rework system suspend diagnostics to make it print fewer messages to the kernel log by default, add a sysfs knob to allow more suspend-related messages to be printed and add Low Power S0 Idle constraints checks to the ACPI suspend-to-idle code (Rafael Wysocki, Srinivas Pandruvada). - Prefer suspend-to-idle over S3 on ACPI-based systems with the ACPI_FADT_LOW_POWER_S0 flag set and the Low Power Idle S0 _DSM interface present in the ACPI tables (Rafael Wysocki). - Update documentation related to system sleep and rename a number of items in the code to make it cleare that they are related to suspend-to-idle (Rafael Wysocki). - Export a variable allowing device drivers to check the target system sleep state from the core system suspend code (Florian Fainelli). - Clean up the cpuidle subsystem to handle the polling state on x86 in a more straightforward way and to use %pOF instead of full_name (Rafael Wysocki, Rob Herring). - Update the devfreq framework to fix and clean up a few minor issues (Chanwoo Choi, Rob Herring). - Extend diagnostics in the generic power domains (genpd) framework and clean it up slightly (Thara Gopinath, Rob Herring). - Fix and clean up a couple of issues in the operating performance points (OPP) framework (Viresh Kumar, Waldemar Rymarkiewicz). - Add support for RV1108 to the rockchip-io Adaptive Voltage Scaling (AVS) driver (David Wu). - Fix the usage of notifiers in CPU power management on some platforms (Alex Shi). - Update the pm-graph system suspend/hibernation and boot profiling utility (Todd Brandt). - Make it possible to run the cpupower utility without CPU0 (Prarit Bhargava)" * tag 'pm-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (87 commits) cpuidle: Make drivers initialize polling state cpuidle: Move polling state initialization code to separate file cpuidle: Eliminate the CPUIDLE_DRIVER_STATE_START symbol cpufreq: imx6q: Fix imx6sx low frequency support cpufreq: speedstep-lib: make several arrays static, makes code smaller PM: docs: Delete the obsolete states.txt document PM: docs: Describe high-level PM strategies and sleep states PM / devfreq: Fix memory leak when fail to register device PM / devfreq: Add dependency on PM_OPP PM / devfreq: Move private devfreq_update_stats() into devfreq PM / devfreq: Convert to using %pOF instead of full_name PM / AVS: rockchip-io: add io selectors and supplies for RV1108 cpufreq: ti: Fix 'of_node_put' being called twice in error handling path cpufreq: dt-platdev: Drop few entries from whitelist cpufreq: dt-platdev: Automatically create cpufreq device with OPP v2 ARM: ux500: don't select CPUFREQ_DT cpuidle: Convert to using %pOF instead of full_name cpufreq: Convert to using %pOF instead of full_name PM / Domains: Convert to using %pOF instead of full_name cpufreq: Cap the default transition delay value to 10 ms ...

mfd: intel_soc_pmic: Differentiate between Bay and Cherry Trail CRC variants

2017-09-05T07:46:02Z

Both Bay and Cherry Trail devices may be used together with a Crystal Cove PMIC. Each platform has its own variant of the PMIC, which both use the same ACPI HID, but they are not 100% compatible. This commits makes the intel_soc_pmic_core code check the _HRV of the ACPI-firmware-node and selects intel_soc_pmic_config_byt_crc resp. intel_soc_pmic_config_cht_crc based on this. This fixes the Bay Trail specific ACPI OpRegion code causing problems on Cherry Trail devices. Specifically this was causing the external microsd slot on a Dell Venue 8 5855 (Cherry Trail version) to not work and the eMMC to become unreliable and throw lots of errors. Fixes: 5165238460 ("mfd: intel_soc_pmic: Core driver") Reported-and-tested-by: russianneuromancer Signed-off-by: Hans de Goede Reviewed-by: Andy Shevchenko Signed-off-by: Lee Jones

mfd: intel_soc_pmic: Export separate mfd-cell configs for BYT and CHT

2017-09-05T07:46:02Z

Both Bay and Cherry Trail devices may be used together with a Crystal Cove PMIC. Each platform has its own variant of the PMIC, which both use the same ACPI HID, but they are not 100% compatible. Looking at the android x86 kernel sources where most of the Crystal Cove code comes from, it talks about "Valley View", "Bay Trail" and / or BYT without ever mentioning Cherry Trail, with the exception of the regulator driver. The Asus Zenfone-2 kernel code has 2 regulator drivers, one for Crystal Cove and one for what it calls Crystal Cove Plus. The Crystal Cove Plus regulator driver is the only one to mention Cherry Trail and that driver uses different register addresses then the normal (Bay Trail) Crystal Cove regulator driver, showing that at least the regulator register addresses are different. The GPIO code should work on both, and the PWM code is known to work on both and is necessary for backlight control on some Cherry Trail devices. Testing has shown that the ACPI OpRegion code otoh is causing problems on Cherry Trail devices, which is not surprising as it deals with the regulators and those have different register addresses on CHT. Specifically the ACPI OpRegion code causes the external microsd slot on a Dell Venue 8 5855 (Cherry Trail version) to not work and the eMMC to become unreliable and throw lots of errors. This commit replaces the single mfd_cell array currently used for Crystal Cove with 2 separate arrays, one for the Bay Trail variant and one for the Cherry Trail variant, note that the Cherry Trail version of the array only contains gpio and pwm cells. The PMIC OpRegion cell is deliberately not included and drivers for the other cells in the Bay Trail cell array were never upstreamed. Fixes: 7cf0a66f32 ("mfd: intel_soc_pmic: Crystal Cove support") Reported-and-tested-by: russianneuromancer Signed-off-by: Hans de Goede Reviewed-by: Andy Shevchenko Signed-off-by: Lee Jones

mfd: omap-usb-tll: Fix register offsets

2017-09-05T07:46:02Z

gcc-8 notices that the register number calculation is wrong when the offset is an 'u8' but the number is larger than 256: drivers/mfd/omap-usb-tll.c: In function 'omap_tll_init': drivers/mfd/omap-usb-tll.c:90:46: error: overflow in conversion from 'int' to 'u8 {aka unsigned char}' chages value from 'i * 256 + 2070' to '22' [-Werror=overflow] This addresses it by always using a 32-bit offset number for the register. This is apparently an old problem that previous compilers did not find. Fixes: 16fa3dc75c22 ("mfd: omap-usb-tll: HOST TLL platform driver") Signed-off-by: Arnd Bergmann Signed-off-by: Lee Jones

mfd: da9052: Constify spi_device_id

2017-09-05T07:46:01Z

spi_device_id are not supposed to change at runtime. All functions working with spi_device_id provided by work with const spi_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav Signed-off-by: Lee Jones

mfd: intel-lpss: Put I2C and SPI controllers into reset state on suspend

2017-09-05T07:46:01Z

Commit 274e43edcda6f ("mfd: intel-lpss: Do not put device in reset state on suspend") changed the behavior on suspend by not putting LPSS controllers into reset. This was done because S3/S0ix fail if UART device is put into reset and no_console_suspend flag is enabled. Because of the above change, I2C controller gets into a bad state if it observes that the I2C lines are pulled low when power to I2C device is cut off during suspend (generally, I2C lines are pulled to power rail of the I2C device in order to ensure that there is no leakage because of the pulls when device is turned off). This results in the controller timing out for all future I2C operations after resume. It is primarily because of the following sequence of operations: During suspend: 1. I2C controller is disabled, but it is not put into reset. 2. Power to I2C device is cut off. 3. #2 results in the I2C lines being pulled low. ==> At this point the I2C controller gets into a bad state On resume: 1. Power to I2C device is enabled. 2. #2 results in the I2C lines being pulled high. 3. I2C controller is enabled. However, even after enabling the I2C controller, all future I2C xfers fail since the controller is in a bad state and does not attempt to make any transactions and hence times out. In order to ensure that the controller does not get into a bad state, this change puts it into reset if the controller type is not UART. With this change, the order of operations is: During suspend: 1. I2C controller is disabled and put into reset. 2. Power to I2C device is cut off. 3. #2 results in the I2C lines being pulled low. On resume: 1. Power to I2C device is enabled. 2. #2 results in the I2C lines being pulled high. 3. I2C controller is enabled and taken out of reset. Signed-off-by: Furquan Shaikh Signed-off-by: Lee Jones

mfd: da9055: Constify i2c_device_id

2017-09-05T07:46:01Z

i2c_device_id are not supposed to change at runtime. All functions working with i2c_device_id provided by work with const i2c_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav Signed-off-by: Lee Jones