linux/drivers/mfd, branch v6.17

treewide: rename GPIO set callbacks back to their original names

2025-08-07T08:07:06Z

The conversion of all GPIO drivers to using the .set_rv() and .set_multiple_rv() callbacks from struct gpio_chip (which - unlike their predecessors - return an integer and allow the controller drivers to indicate failures to users) is now complete and the legacy ones have been removed. Rename the new callbacks back to their original names in one sweeping change. Signed-off-by: Bartosz Golaszewski

Merge tag 'mfd-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

2025-07-31T18:50:25Z

Pull MFD updates from Lee Jones: "New Support & Features: - Add extensive support for the Analog Devices ADP5589 I/O expander, including core MFD, GPIO, PWM, and a new keypad matrix input driver. This also adds support for handling various events including GPI, keypad, reset and unlock ev ents - Add support for the TI TPS652G1 PMIC, a stripped-down version of the TPS65224, including core MFD, PFSM, pinctrl, and GPIO support - Add support for the Apple Silicon System Management Controller (SMC), including the core MFD driver which handles the RTKit-based protocol, a new GPIO driver for PMU GPIOs, and a new reboot/power-off driver. Improvements & Fixes: - Dynamically add ADP5585 sub-devices based on device tree properties - Move ADP5585 oscillator control from the child PWM driver to the main MFD driver to better handle shared resources - Add support for a hardware reset pin and VDD regulator to the ADP5585 driver - Update the TPS65219 MFD cell's GPIO compatible string for the TPS65214 to reflect hardware capabilities correctly - Separate the ChromeOS EC charge-control probing from the USB-PD subsystem, allowing it to probe independently based on the dedicated EC_FEATURE_CHARGER - Fix an interrupt naming typo in the MT6370 driver - Fix RK806 PMIC reset behavior by allowing the reset mode to be customized via a new device tree property - Fix AXP20X regulator cell ID conflicts for secondary PMICs on boards without an IRQ line connected - Fix MT6397 keypad sub-device creation to use specific names instead of a generic one, ensuring correct driver binding - Fix a build warning in the stm32-timers driver by adding a missing include for export.h. Cleanups & Refactoring: - Refactor the ADP5585 driver to simplify how regmap defaults are handled, making it easier to add new chip variants - Introduce per-chip register map structures for the ADP5585/ADP5589 family to handle differences between the devices - Convert several drivers to use dev_fwnode() instead of of_fwnode_handle() - Make various static structures const in the cs40l50, rohm-bd71828, tps65219, and twl6040 drivers - Remove redundant pm_runtime_mark_last_busy() calls from several drivers - Alphabetize Kconfig entries for Cirrus Logic and Maxim drivers - Remove unused fields from the 'tps65219' struct - Update several MFD-related headers to follow the 'Include What You Use' (IWYU) principle. Removals: - Remove the old, platform-data-based adp5589-keys input driver, which is now superseded by the new MFD-based adp5585-keys driver - Remove the unused twl6030_mmc_card_detect() functions and associated header declarations - Remove the now unused pcf50633/core.h header file - Remove the fsl,imx8qxp-csr device tree binding, which was being used incorrectly. Device Tree Bindings Updates: - Add support for the Analog Devices ADP5589 I/O expander to the adi,adp5585.yaml binding - Add new properties to the adi,adp5585.yaml binding for input events, including keypad pins, unlock events, and reset events - Add a reset-gpios property to the adi,adp5585.yaml binding - Add the TI TPS652G1 PMIC to the ti,tps6594.yaml binding - Add new bindings for the Apple Mac System Management Controller (SMC) and its sub-devices: apple,smc.yaml, apple,smc-gpio.yaml, and apple,smc-reboot.yaml - Convert the Freescale MXS LRADC binding (mxs-lradc) to YAML schema format - Convert and combine the NXP LPC1850 CREG, DMAMUX, and USB OTG PHY bindings into a single YAML schema file - Convert the TI TPS65910 binding to YAML schema format - Add a comment to the samsung,s2mps11.yaml binding to clarify the use of 'oneOf' for interrupt properties - Add the rockchip,reset-mode property to the rockchip,rk806.yaml binding to allow customization of the PMIC's reset behavior" * tag 'mfd-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (28 commits) mfd: dt-bindings: Convert TPS65910 to DT schema mfd: Minor Cirrus/Maxim Kconfig order fixes mfd: Remove redundant pm_runtime_mark_last_busy() calls mfd: mt6397: Do not use generic name for keypad sub-devices mfd: axp20x: Set explicit ID for regulator cell if no IRQ line is present mfd: mt6370: Fix the interrupt naming typo mfd: rk8xx-core: Allow to customize RK806 reset mode dt-bindings: mfd: rk806: Allow to customize PMIC reset mode mfd: syscon: atmel-smc: Don't use "proxy" headers mfd: madera: Don't use "proxy" headers mfd: wm8350-core: Don't use "proxy" headers dt-bindings: mfd: samsung,s2mps11: Add comment about interrupts properties mfd: davinci_voicecodec: Don't use "proxy" headers mfd: pcf50633: Remove the header file core.h mfd: tps65219: Remove another unused field from 'struct tps65219' mfd: tps65219: Remove an unused field from 'struct tps65219' mfd: tps65219: Constify struct regmap_irq_sub_irq_map and tps65219_chip_data mfd: rohm-bd71828: Constify some structures dt-bindings: mfd: fsl,imx8qxp-csr: Remove binding documentation mfd: axp20x: Set explicit ID for AXP313 regulator ...

Merge tag 'mips_6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

2025-07-31T18:08:55Z

Pull MIPS updates from Thomas Bogendoerfer: - DT updates for ralink, mobileye and atheros/qualcomm - Clean up of mc146818 usage - Speed up delay calibration for CPS - Other cleanups and fixes * tag 'mips_6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (50 commits) MIPS: Don't use %pK through printk MIPS: Update Joshua Kinard's e-mail address MIPS: mobileye: dts: eyeq5,eyeq6h: rename the emmc controller MIPS: mm: tlb-r4k: Uniquify TLB entries on init MIPS: SGI-IP27: Delete an unnecessary check before kfree() in hub_domain_free() mips/malta,loongson2ef: use generic mc146818_get_time function mips: remove redundant macro mc146818_decode_year mips/mach-rm: remove custom mc146818rtc.h file mips: remove unused function mc146818_set_rtc_mmss MIPS: CPS: Optimise delay CPU calibration for SMP MIPS: CPS: Improve mips_cps_first_online_in_cluster() MIPS: disable MMID when not supported by the hardware MIPS: eyeq5_defconfig: add I2C subsystem, driver and temp sensor driver MIPS: eyeq5_defconfig: add GPIO subsystem & driver MIPS: mobileye: eyeq5: add two GPIO bank nodes MIPS: mobileye: eyeq5: add evaluation board I2C temp sensor MIPS: mobileye: eyeq5: add 5 I2C controller nodes MIPS: eyeq5_defconfig: Update for v6.16-rc1 MIPS: vpe-mt: add missing prototypes for vpe_{alloc,start,stop,free} mips: boot: use 'targets' instead of extra-y in Makefile ...

mfd: Minor Cirrus/Maxim Kconfig order fixes

2025-07-30T07:16:44Z

Move some Cirrus parts so they are grouped together alphabetically in menuconfig. Also move the Maxim 5970 out of the middle of the Cirrus parts and put it with the other Maxim parts. No functional changes just alphabetising. Signed-off-by: Charles Keepax Link: https://lore.kernel.org/r/20250709133103.3482015-1-ckeepax@opensource.cirrus.com Signed-off-by: Lee Jones

mfd: Remove redundant pm_runtime_mark_last_busy() calls

2025-07-30T07:16:43Z

pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(), pm_runtime_autosuspend() and pm_request_autosuspend() now include a call to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to pm_runtime_mark_last_busy(). Signed-off-by: Sakari Ailus Reviewed-by: Charles Keepax Link: https://lore.kernel.org/r/20250704075432.3220321-1-sakari.ailus@linux.intel.com Signed-off-by: Lee Jones

Merge tag 'regulator-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

2025-07-29T05:52:02Z

Pull regulator updates from Mark Brown: "The big change in this release is the addition of Rust bindings from Daniel Almeida, allowing fairly basic consumer use with support for enable and voltage setting operations. This should be good for the vast majority of consumers. Otherwise it's been quite quiet, a few new devices supported, plus some cleanups and fixes. Summary: - Basic Rust bindings - A fix for making large voltage changes on regulators where we limit the size of voltage change we will do in one step, previously we just got as close as we could in one step - Cleanups of our usage of the PM autosuspend functions, this pulls in some PM core changes on a shared tag - Mode setting support for PCA9450 - Support for Mediatek MT6893 and MT8196 DVFSRC, Qualcomm PM7550 and PMR735B, Raspberry Pi displays and TI TPS652G1 The TI driver pulls in the MFD portion of the support for the device and the pinctrl driver which was in the same tag" * tag 'regulator-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (40 commits) regulator: mt6370: Fix spelling mistake in mt6370_regualtor_register regulator: Kconfig: Fix spelling mistake "regualtor" -> "regulator" regulator: core: repeat voltage setting request for stepped regulators regulator: rt6160: Add rt6166 vout min_uV setting for compatible MAINTAINERS: add regulator.rs to the regulator API entry rust: regulator: add a bare minimum regulator abstraction regulator: tps6286x-regulator: Fix a copy & paste error regulator: qcom-rpmh: add support for pm7550 regulators regulator: qcom-rpmh: add support for pmr735b regulators regulator: dt-bindings: qcom,rpmh: Add PMR735B compatible regulator: dt-bindings: qcom,rpmh: Add PM7550 compatible regulator: tps6594-regulator: Add TI TPS652G1 PMIC regulators regulator: tps6594-regulator: refactor variant descriptions regulator: tps6594-regulator: remove hardcoded buck config regulator: tps6594-regulator: remove interrupt_count dt-bindings: mfd: ti,tps6594: Add TI TPS652G1 PMIC pinctrl: pinctrl-tps6594: Add TPS652G1 PMIC pinctrl and GPIO misc: tps6594-pfsm: Add TI TPS652G1 PMIC PFSM mfd: tps6594: Add TI TPS652G1 support regulator: sy8827n: make enable gpio NONEXCLUSIVE ...

Merge tag 'gpio-updates-for-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

2025-07-29T04:58:46Z

Pull gpio updates from Bartosz Golaszewski: "There's one new driver (Apple SMC) and extensions to existing drivers for supporting new HW models. A lot of different impovements across drivers and in core GPIO code. Details on that are in the signed tag as usual. We managed to remove some of the legacy APIs. Arnd Bergmann started to work on making the legacy bits optional so that we may compile them only for older platforms that still really need them. Rob Herring has done a lot of work to convert legacy .txt dt-bindings for GPIO controllers to YAML. There are only a few left now in the GPIO tree. A big part of the commits in this PR concern the conversion of GPIO drivers to using the new line value setter callbacks. This conversion is now complete treewide (unless I've missed something) and once all the changes from different trees land in mainline, I'll send you another PR containing a commit dropping the legacy callbacks from the tree. As the quest to pay back technical dept never really ends, we're starting another set of interface conversions, this time it's about moving fields specific to only a handful of drivers using the gpio-mmio helper out of the core gpio_chip structure that every controller implements and uses. This cycle we introduce a new set of APIs and convert a few drivers under drivers/gpio/, next cycle we'll convert remaining modules treewide (in gpio, pinctrl and mfd trees) and finally remove the old interfaces and move the gpio-mmio fields into their own structure wrapping gpio_chip. One last change I should mention here is the rework of the sysfs interface. In 2016, we introduced the GPIO character device as the preferred alternative to the sysfs class under /sys/class/gpio. While it has seen a wide adoption with the help of its user-space counterpart - libgpiod - there are still users who prefer the simplicity of sysfs. As far as the GPIO subsystem is concerned, the problem is not the existince of the GPIO class as such but rather the fact that it exposes the global GPIO numbers to the user-space, stopping us from ever being able to remove the numberspace from the kernel. To that end, this release we introduced a parallel, limited sysfs interface that doesn't expose these numbers and only implements a subset of features that are relevant to the existing users. This is a result of several discussions over the course of last year and should allow us to remove the legacy part some time in the future. Summary: GPIOLIB core: - introduce a parallel, limited sysfs user ABI that doesn't expose the global GPIO numbers to user-space while maintaining backward compatibility with the end goal of it completely replacing the existing interface, allowing us to remove it - remove the legacy devm_gpio_request() routine which has no more users - start the process of allowing to compile-out the legacy parts of the GPIO core for users who don't need it by introducing a new Kconfig option: GPIOLIB_LEGACY - don't use global GPIO numbers in debugfs output from the core code (drivers still do it, the work is ongoing) - start the process of moving the fields specific to the gpio-mmio helper out of the core struct gpio_chip into their own structure that wraps it: create a new header with modern interfaces and convert several drivers to using it - remove the platform data structure associated with the gpio-mmio helper from the kernel after having converted all remaining users to generic device properties - remove legacy struct gpio definition as it has no more users New drivers: - add the GPIO driver for the Apple System Management Controller Driver improvements: - add support for new models to gpio-adp5585, gpio-tps65219 and gpio-pca953x - extend the interrupt support in gpio-loongson-64bit - allow to mark the simulated GPIO lines as invalid in gpio-sim - convert all remaining GPIO drivers to using the new GPIO value setter callbacks - convert gpio-rcar to using simple device power management ops callbacks - don't check if current direction of a line is output before setting the value in gpio-pisosr and ti-fpc202: the GPIO core already handles that - also drop unneeded GPIO range checks in drivers, the core already makes sure we're within bounds when calling driver callbacks - use dev_fwnode() where applicable across GPIO drivers - set line value in gpio-zynqmp-modepin and gpio-twl6040 when the user wants to change direction of the pin to output even though these drivers don't need to do anything else to actually set the direction, otherwise a call like gpiod_direction_output(d, 1) will not result in the line driver high - remove the reduntant call to pm_runtime_mark_last_busy() from gpio-arizona - use lock guards in gpio-cadence and gpio-mxc - check the return values of regmap functions in gpio-wcd934x and gpio-tps65912 - use better regmap interfaces in gpio-wcove and gpio-pca953x - remove dummy GPIO chip callbacks from several drivers in cases where the GPIO core can already handle their absence - allow building gpio-palmas as a module Fixes: - use correct bit widths (according to the documentation) in gpio-virtio Device-tree bindings: - convert several of the legacy .txt documents for many different devices to YAML, improving automatic validation - create a "trivial" GPIO DT schema that covers a wide range of simple hardware that share a set of basic GPIO properties - document new HW: Apple MAC SMC GPIO block and adp5589 I/O expander - document a new model for pca95xx - add and/or remove properties in YAML documents for gpio-rockchip, fsl,qoriq-gpio, arm,pl061 and gpio-xilinx Misc: - some minor refactoring in several places, adding/removing forward declarations, moving defines to better places, constify the arguments in some functions, remove duplicate includes, etc. - documentation updates" * tag 'gpio-updates-for-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (202 commits) MIPS: alchemy: gpio: use new GPIO line value setter callbacks for the remaining chips gpiolib: enable CONFIG_GPIOLIB_LEGACY even for !GPIOLIB gpio: virtio: Fix config space reading. gpiolib: make legacy interfaces optional dt-bindings: gpio: rockchip: Allow use of a power-domain gpiolib: of: add forward declaration for struct device_node power: reset: macsmc-reboot: Add driver for rebooting via Apple SMC gpio: Add new gpio-macsmc driver for Apple Macs mfd: Add Apple Silicon System Management Controller soc: apple: rtkit: Make shmem_destroy optional dt-bindings: mfd: Add Apple Mac System Management Controller dt-bindings: power: reboot: Add Apple Mac SMC Reboot Controller dt-bindings: gpio: Add Apple Mac SMC GPIO block gpio: cadence: Remove duplicated include in gpio-cadence.c gpio: tps65219: Add support for TI TPS65214 PMIC gpio: tps65219: Update _IDX & _OFFSET macro prefix gpio: sysfs: Fix an end of loop test in gpiod_unexport() dt-bindings: gpio: Convert qca,ar7100-gpio to DT schema dt-bindings: gpio: Convert maxim,max3191x to DT schema dt-bindings: gpio: fsl,qoriq-gpio: Add missing mpc8xxx compatibles ...

MIPS: Update Joshua Kinard's e-mail address

2025-07-28T07:57:24Z

I am switching my address to a personal domain, so some files in the SGI IP30 and IOC3 files need to be updated. I will send updates for the MAINTAINERS file and rtc-ds1685 separately to linux-rtc. Signed-off-by: Joshua Kinard Signed-off-by: Thomas Bogendoerfer

Merge tag 'ib-mfd-gpio-power-soc-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into gpio/for-next

2025-07-24T11:27:21Z

Immutable branch between MFD, GPIO, Power and SoC due for the v6.17 merge window

mfd: mt6397: Do not use generic name for keypad sub-devices

2025-07-24T10:27:20Z

Do not use "mtk-pmic-keys" when creating sub-device for the keypad to make sure the keypad driver will only bind to the sub-device if it has support for the variant/has matching compatible. Cc: stable@vger.kernel.org Fixes: 6e31bb8d3a63 ("mfd: mt6397: Add initial support for MT6328") Fixes: de58cee8c6b8 ("mfd: mt6397-core: Add MT6357 PMIC support") Fixes: 4a901e305011 ("mfd: mt6397-core: Add resources for PMIC keys for MT6359") Reported-by: Louis-Alexis Eyraud Signed-off-by: Dmitry Torokhov Tested-by: Louis-Alexis Eyraud # on Link: https://lore.kernel.org/r/r4k3pgd3ew3ypne7ernxuzwgniiyvzosbce4cfajbcu7equblt@yato35tjb3lw Signed-off-by: Lee Jones