linux/drivers/misc/Makefile, branch v6.13

Merge tag 'char-misc-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2024-11-29T19:58:27Z

Pull char/misc/IIO/whatever driver subsystem updates from Greg KH: "Here is the 'big and hairy' char/misc/iio and other small driver subsystem updates for 6.13-rc1. Loads of things in here, and even a fun merge conflict! - rust misc driver bindings and other rust changes to make misc drivers actually possible. I think this is the tipping point, expect to see way more rust drivers going forward now that these bindings are present. Next merge window hopefully we will have pci and platform drivers working, which will fully enable almost all driver subsystems to start accepting (or at least getting) rust drivers. This is the end result of a lot of work from a lot of people, congrats to all of them for getting this far, you've proved many of us wrong in the best way possible, working code :) - IIO driver updates, too many to list individually, that subsystem keeps growing and growing... - Interconnect driver updates - nvmem driver updates - pwm driver updates - platform_driver::remove() fixups, loads of them - counter driver updates - misc driver updates (keba?) - binder driver updates and fixes - loads of other small char/misc/etc driver updates and additions, full details in the shortlog. All of these have been in linux-next for a while, with no other reported issues other than that merge conflict" * tag 'char-misc-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (401 commits) mei: vsc: Fix typo "maintstepping" -> "mainstepping" firmware: Switch back to struct platform_driver::remove() misc: isl29020: Fix the wrong format specifier scripts/tags.sh: Don't tag usages of DEFINE_MUTEX fpga: Switch back to struct platform_driver::remove() mei: vsc: Improve error logging in vsc_identify_silicon() mei: vsc: Do not re-enable interrupt from vsc_tp_reset() dt-bindings: spmi: qcom,x1e80100-spmi-pmic-arb: Add SAR2130P compatible dt-bindings: spmi: spmi-mtk-pmif: Add compatible for MT8188 spmi: pmic-arb: fix return path in for_each_available_child_of_node() iio: Move __private marking before struct element priv in struct iio_dev docs: iio: ad7380: add adaq4370-4 and adaq4380-4 iio: adc: ad7380: add support for adaq4370-4 and adaq4380-4 iio: adc: ad7380: use local dev variable to shorten long lines iio: adc: ad7380: fix oversampling formula dt-bindings: iio: adc: ad7380: add adaq4370-4 and adaq4380-4 compatible parts bus: mhi: host: pci_generic: Use pcim_iomap_region() to request and map MHI BAR bus: mhi: host: Switch trace_mhi_gen_tre fields to native endian misc: atmel-ssc: Use of_property_present() for non-boolean properties misc: keba: Add hardware dependency ...

misc: Add support for LAN966x PCI device

2024-10-24T10:09:33Z

Add a PCI driver that handles the LAN966x PCI device using a device-tree overlay. This overlay is applied to the PCI device DT node and allows to describe components that are present in the device. The memory from the device-tree is remapped to the BAR memory thanks to "ranges" properties computed at runtime by the PCI core during the PCI enumeration. The PCI device itself acts as an interrupt controller and is used as the parent of the internal LAN966x interrupt controller to route the interrupts to the assigned PCI INTx interrupt. Signed-off-by: Herve Codina Acked-by: Greg Kroah-Hartman Acked-by: Bjorn Helgaas # quirks.c Link: https://lore.kernel.org/r/20241014124636.24221-2-herve.codina@bootlin.com Signed-off-by: Philipp Zabel

misc: ti-st: st_kim: remove the driver

2024-10-18T11:42:21Z

This driver has only ever been used by the omap4-panda board file. This file has been gone for over 10 years. Let it go. Signed-off-by: Bartosz Golaszewski Link: https://lore.kernel.org/r/20241016094117.16654-1-brgl@bgdev.pl Signed-off-by: Greg Kroah-Hartman

rpmb: add Replay Protected Memory Block (RPMB) subsystem

2024-08-26T11:16:20Z

A number of storage technologies support a specialised hardware partition designed to be resistant to replay attacks. The underlying HW protocols differ but the operations are common. The RPMB partition cannot be accessed via standard block layer, but by a set of specific RPMB commands. Such a partition provides authenticated and replay protected access, hence suitable as a secure storage. The initial aim of this patch is to provide a simple RPMB driver interface which can be accessed by the optee driver to facilitate early RPMB access to OP-TEE OS (secure OS) during the boot time. A TEE device driver can claim the RPMB interface, for example, via rpmb_interface_register() or rpmb_dev_find_device(). The RPMB driver provides a callback to route RPMB frames to the RPMB device accessible via rpmb_route_frames(). The detailed operation of implementing the access is left to the TEE device driver itself. Signed-off-by: Tomas Winkler Signed-off-by: Alex Bennée Signed-off-by: Shyam Saini Signed-off-by: Jens Wiklander Reviewed-by: Linus Walleij Tested-by: Manuel Traut Reviewed-by: Ulf Hansson Reviewed-by: Greg Kroah-Hartman Link: https://lore.kernel.org/r/20240814153558.708365-2-jens.wiklander@linaro.org Signed-off-by: Ulf Hansson

misc: mrvl-cn10k-dpi: add Octeon CN10K DPI administrative driver

2024-07-10T12:58:29Z

Adds a misc driver for Marvell CN10K DPI(DMA Engine) device's physical function which initializes DPI DMA hardware's global configuration and enables hardware mailbox channels between physical function (PF) and it's virtual functions (VF). VF device drivers (User space drivers) use this hw mailbox to communicate any required device configuration on it's respective VF device. Accordingly, this DPI PF driver provisions the VF device resources. At the hardware level, the DPI physical function (PF) acts as a management interface to setup the VF device resources, VF devices are only provisioned to handle or control the actual DMA Engine's data transfer capabilities. Signed-off-by: Vamsi Attunuru Reviewed-by: Srujana Challa Link: https://lore.kernel.org/r/20240706153009.3775333-1-vattunuru@marvell.com Signed-off-by: Greg Kroah-Hartman

misc: keba: Add basic KEBA CP500 system FPGA support

2024-07-04T10:29:07Z

The KEBA CP500 system FPGA is a PCIe device, which consists of multiple IP cores. Every IP core has its own auxiliary driver. The cp500 driver registers an auxiliary device for each device and the corresponding drivers are loaded by the Linux driver infrastructure. Currently 3 variants of this device exists. Every variant has its own PCI device ID, which is used to determine the list of available IP cores. In this first version only the auxiliary device for the I2C controller is registered. Besides the auxiliary device registration some other basic functions of the FPGA are implemented; e.g, FPGA version sysfs file, keep FPGA configuration on reset sysfs file, error message for errors on the internal AXI bus of the FPGA. Signed-off-by: Gerhard Engleder Link: https://lore.kernel.org/r/20240630194740.7137-2-gerhard@engleder-embedded.com Signed-off-by: Greg Kroah-Hartman

ntsync: Introduce the ntsync driver and character device.

2024-04-11T13:34:36Z

ntsync uses a misc device as the simplest and least intrusive uAPI interface. Each file description on the device represents an isolated NT instance, intended to correspond to a single NT virtual machine. Signed-off-by: Elizabeth Figura Link: https://lore.kernel.org/r/20240329000621.148791-2-zfigura@codeweavers.com Signed-off-by: Greg Kroah-Hartman

misc: Add Nitro Secure Module driver

2023-11-28T19:05:16Z

When running Linux inside a Nitro Enclave, the hypervisor provides a special virtio device called "Nitro Security Module" (NSM). This device has 3 main functions: 1) Provide attestation reports 2) Modify PCR state 3) Provide entropy This patch adds a driver for NSM that exposes a /dev/nsm device node which user space can issue an ioctl on this device with raw NSM CBOR formatted commands to request attestation documents, influence PCR states, read entropy and enumerate status of the device. In addition, the driver implements a hwrng backend. Originally-by: Petre Eftime Signed-off-by: Alexander Graf Reviewed-by: Arnd Bergmann Link: https://lore.kernel.org/r/20231011213522.51781-1-graf@amazon.com Signed-off-by: Greg Kroah-Hartman

misc: tps6594-pfsm: Add driver for TI TPS6594 PFSM

2023-06-15T11:41:53Z

This PFSM controls the operational modes of the PMIC: - STANDBY and LP_STANDBY, - ACTIVE state, - MCU_ONLY state, - RETENTION state, with or without DDR and/or GPIO retention. Depending on the current operational mode, some voltage domains remain energized while others can be off. This PFSM is also used to trigger a firmware update, and provides R/W access to device registers. See Documentation/misc-devices/tps6594-pfsm.rst for more information. Signed-off-by: Julien Panis Message-ID: <20230511095126.105104-5-jpanis@baylibre.com> Signed-off-by: Greg Kroah-Hartman

misc: tps6594-esm: Add driver for TI TPS6594 ESM

2023-06-15T11:41:53Z

This patch adds support for TPS6594 ESM (Error Signal Monitor). This device monitors the SoC error output signal at its nERR_SOC input pin. In error condition, ESM toggles its nRSTOUT_SOC pin to reset the SoC. Signed-off-by: Julien Panis Message-ID: <20230511095126.105104-4-jpanis@baylibre.com> Signed-off-by: Greg Kroah-Hartman