linux/drivers/misc/eeprom, branch v5.0

eeprom: at24: add support for 24c2048

2018-12-10T15:23:27Z

Works with ST M24M02. Signed-off-by: Adrian Bunk Signed-off-by: Bartosz Golaszewski

Merge branch 'i2c/for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

2018-10-29T21:44:03Z

Pull i2c updates from Wolfram Sang: "I2C has not so much stuff this time. Mostly driver enablement for new SoCs, some driver bugfixes, and some cleanups" * 'i2c/for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (35 commits) MAINTAINERS: add maintainer for Renesas RIIC driver i2c: sh_mobile: Remove dummy runtime PM callbacks i2c: uniphier-f: fix race condition when IRQ is cleared i2c: uniphier-f: fix occasional timeout error i2c: uniphier-f: make driver robust against concurrency i2c: i2c-qcom-geni: Simplify irq handler i2c: i2c-qcom-geni: Simplify tx/rx functions i2c: designware: Set IRQF_NO_SUSPEND flag for all BYT and CHT controllers i2c: mux: mlxcpld: simplify code to reach the adapter i2c: mux: ltc4306: simplify code to reach the adapter i2c: mux: pca954x: simplify code to reach the adapter i2c: core: remove level of indentation in i2c_transfer i2c: core: remove outdated DEBUG output i2c: zx2967: use core to detect 'no zero length' quirk i2c: tegra: use core to detect 'no zero length' quirk i2c: qup: use core to detect 'no zero length' quirk i2c: omap: use core to detect 'no zero length' quirk i2c: Convert to using %pOFn instead of device_node.name i2c: brcmstb: Allow enabling the driver on DSL SoCs eeprom: at24: fix unexpected timeout under high load ...

eeprom: New ee1004 driver for DDR4 memory

2018-10-15T18:51:46Z

The EEPROMs which hold the SPD data on DDR4 memory modules are no longer standard AT24C02-compatible EEPROMs. They are 512-byte EEPROMs which use only 1 I2C address for data access. You need to switch between the lower page and the upper page of data by sending commands on the SMBus. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman

eeprom: at25: remove unneeded 'at25_remove'

2018-10-15T18:51:46Z

Fixes gcc '-Wunused-but-set-variable' warning: drivers/misc/eeprom/at25.c: In function 'at25_remove': drivers/misc/eeprom/at25.c:384:20: warning: variable 'at25' set but not used [-Wunused-but-set-variable] Since commit 96d08fb43e30 ("eeprom: at25: use devm_nvmem_register()"), at25_remove is do nothing, so can be removed. Signed-off-by: YueHaibing Acked-by: Arnd Bergmann Reviewed-by: Geert Uytterhoeven Signed-off-by: Greg Kroah-Hartman

eeprom: at24: fix unexpected timeout under high load

2018-10-02T14:58:21Z

Within at24_loop_until_timeout the timestamp used for timeout checking is recorded after the I2C transfer and sleep_range(). Under high CPU load either the execution time for I2C transfer or sleep_range() could actually be larger than the timeout value. Worst case the I2C transfer is only tried once because the loop will exit due to the timeout although the EEPROM is now ready. To fix this issue the timestamp is recorded at the beginning of each iteration. That is, before I2C transfer and sleep. Then the timeout is actually checked against the timestamp of the previous iteration. This makes sure that even if the timeout is reached, there is still one more chance to try the I2C transfer in case the EEPROM is ready. Example: If you have a system which combines high CPU load with repeated EEPROM writes you will run into the following scenario. - System makes a successful regmap_bulk_write() to EEPROM. - System wants to perform another write to EEPROM but EEPROM is still busy with the last write. - Because of high CPU load the usleep_range() will sleep more than 25 ms (at24_write_timeout). - Within the over-long sleeping the EEPROM finished the previous write operation and is ready again. - at24_loop_until_timeout() will detect timeout and won't try to write. Signed-off-by: Wang Xin Signed-off-by: Mark Jonas Signed-off-by: Bartosz Golaszewski

eeprom: at25: use devm_nvmem_register()

2018-09-28T13:14:53Z

Use the resource managed variant of nvmem_register(). Signed-off-by: Bartosz Golaszewski Signed-off-by: Srinivas Kandagatla Signed-off-by: Greg Kroah-Hartman

eeprom: eeprom_93xx46: use resource management

2018-09-28T13:14:53Z

Use resource managed variants of nvmem_register() and kzalloc(). Signed-off-by: Bartosz Golaszewski Signed-off-by: Srinivas Kandagatla Signed-off-by: Greg Kroah-Hartman

Merge branch 'i2c/for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

2018-08-22T00:40:46Z

Pull i2c updates from Wolfram Sang: - the core has now a lockless variant of i2c_smbus_xfer. Some open coded versions of this got removed in drivers. This also enables proper SCCB support in regmap. - locking got a more precise naming. i2c_{un}lock_adapter() had to go, and we know use i2c_lock_bus() consistently with flags like I2C_LOCK_ROOT_ADAPTER and I2C_LOCK_SEGMENT to avoid ambiguity. - the gpio fault injector got a new delicate testcase - the bus recovery procedure got fixed to handle the new testcase correctly - a new quirk flag for controllers not able to handle zero length messages together with driver updates to use it - new drivers: FSI bus attached I2C masters, GENI I2C controller, Owl family S900 - and a good set of driver improvements and bugfixes * 'i2c/for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (77 commits) i2c: rcar: implement STOP and REP_START according to docs i2c: rcar: refactor private flags i2c: core: ACPI: Make acpi_gsb_i2c_read_bytes() check i2c_transfer return value i2c: core: ACPI: Properly set status byte to 0 for multi-byte writes dt-bindings: i2c: rcar: Add r8a774a1 support dt-bindings: i2c: sh_mobile: Add r8a774a1 support i2c: imx: Simplify stopped state tracking i2c: imx: Fix race condition in dma read i2c: pasemi: remove hardcoded bus numbers on smbus i2c: designware: Add SPDX license tag i2c: designware: Convert to use struct i2c_timings i2c: core: Parse SDA hold time from firmware i2c: designware-pcidrv: Mark expected switch fall-through i2c: amd8111: Mark expected switch fall-through i2c: sh_mobile: use core to detect 'no zero length read' quirk i2c: xlr: use core to detect 'no zero length' quirk i2c: rcar: use core to detect 'no zero length' quirk i2c: stu300: use core to detect 'no zero length' quirk i2c: pmcmsp: use core to detect 'no zero length' quirk i2c: mxs: use core to detect 'no zero length' quirk ...

misc: eeprom: assignment outside the if statement

2018-08-05T14:25:10Z

Assignment of any variable should be kept outside the if statement Signed-off-by: Parth Y Shah Reviewed-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman

eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency

2018-08-02T08:42:25Z

We check for IS_ERR_OR_NULL() here, but later we check the same thing for NULL only. It turns out that it can only be NULL so we can make the checking consistent by removing the ERR_PTR stuff. Signed-off-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman