linux/drivers/misc/mic, branch v4.11

Merge branch 'WIP.sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2017-03-03T18:16:38Z

Pull sched.h split-up from Ingo Molnar: "The point of these changes is to significantly reduce the header footprint, to speed up the kernel build and to have a cleaner header structure. After these changes the new 's typical preprocessed size goes down from a previous ~0.68 MB (~22K lines) to ~0.45 MB (~15K lines), which is around 40% faster to build on typical configs. Not much changed from the last version (-v2) posted three weeks ago: I eliminated quirks, backmerged fixes plus I rebased it to an upstream SHA1 from yesterday that includes most changes queued up in -next plus all sched.h changes that were pending from Andrew. I've re-tested the series both on x86 and on cross-arch defconfigs, and did a bisectability test at a number of random points. I tried to test as many build configurations as possible, but some build breakage is probably still left - but it should be mostly limited to architectures that have no cross-compiler binaries available on kernel.org, and non-default configurations" * 'WIP.sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (146 commits) sched/headers: Clean up sched/headers: Remove #ifdefs from sched/headers: Remove the include from sched/headers, hrtimer: Remove the include from sched/headers, x86/apic: Remove the header inclusion from sched/headers, timers: Remove the include from sched/headers: Remove from sched/headers: Remove from sched/core: Remove unused prefetch_stack() sched/headers: Remove from sched/headers: Remove the 'init_pid_ns' prototype from sched/headers: Remove from sched/headers: Remove from sched/headers: Remove the runqueue_is_locked() prototype sched/headers: Remove from sched/headers: Remove from sched/headers: Remove from sched/headers: Remove from sched/headers: Remove the include from sched/headers: Remove from ...

Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

2017-03-02T21:53:13Z

Pull vhost updates from Michael Tsirkin: "virtio, vhost: optimizations, fixes Looks like a quiet cycle for vhost/virtio, just a couple of minor tweaks. Most notable is automatic interrupt affinity for blk and scsi. Hopefully other devices are not far behind" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio-console: avoid DMA from stack vhost: introduce O(1) vq metadata cache virtio_scsi: use virtio IRQ affinity virtio_blk: use virtio IRQ affinity blk-mq: provide a default queue mapping for virtio device virtio: provide a method to get the IRQ affinity mask for a virtqueue virtio: allow drivers to request IRQ affinity when creating VQs virtio_pci: simplify MSI-X setup virtio_pci: don't duplicate the msix_enable flag in struct pci_dev virtio_pci: use shared interrupts for virtqueues virtio_pci: remove struct virtio_pci_vq_info vhost: try avoiding avail index access when getting descriptor virtio_mmio: expose header to userspace

sched/headers: Prepare to move signal wakeup & sigpending methods from into

2017-03-02T07:42:32Z

Fix up affected files that include this signal functionality via sched.h. Acked-by: Linus Torvalds Cc: Mike Galbraith Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar

sched/headers: Prepare for new header dependencies before moving code to

2017-03-02T07:42:29Z

We are going to split out of , which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder file that just maps to to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds Cc: Mike Galbraith Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar

sched/headers: Prepare for new header dependencies before moving code to

2017-03-02T07:42:28Z

We are going to split out of , which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder file that just maps to to make this patch obviously correct and bisectable. The APIs that are going to be moved first are: mm_alloc() __mmdrop() mmdrop() mmdrop_async_fn() mmdrop_async() mmget_not_zero() mmput() mmput_async() get_task_mm() mm_access() mm_release() Include the new header in the files that are going to need it. Acked-by: Linus Torvalds Cc: Mike Galbraith Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar

virtio: allow drivers to request IRQ affinity when creating VQs

2017-02-27T18:54:04Z

Add a struct irq_affinity pointer to the find_vqs methods, which if set is used to tell the PCI layer to create the MSI-X vectors for our I/O virtqueues with the proper affinity from the start. Compared to after the fact affinity hints this gives us an instantly working setup and allows to allocate the irq descritors node-local and avoid interconnect traffic. Last but not least this will allow blk-mq queues are created based on the interrupt affinity for storage drivers. Signed-off-by: Christoph Hellwig Reviewed-by: Jason Wang Signed-off-by: Michael S. Tsirkin

Merge tag 'for-next-dma_ops' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma

2017-02-25T21:45:43Z

Pull rdma DMA mapping updates from Doug Ledford: "Drop IB DMA mapping code and use core DMA code instead. Bart Van Assche noted that the ib DMA mapping code was significantly similar enough to the core DMA mapping code that with a few changes it was possible to remove the IB DMA mapping code entirely and switch the RDMA stack to use the core DMA mapping code. This resulted in a nice set of cleanups, but touched the entire tree and has been kept separate for that reason." * tag 'for-next-dma_ops' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (37 commits) IB/rxe, IB/rdmavt: Use dma_virt_ops instead of duplicating it IB/core: Remove ib_device.dma_device nvme-rdma: Switch from dma_device to dev.parent RDS: net: Switch from dma_device to dev.parent IB/srpt: Modify a debug statement IB/srp: Switch from dma_device to dev.parent IB/iser: Switch from dma_device to dev.parent IB/IPoIB: Switch from dma_device to dev.parent IB/rxe: Switch from dma_device to dev.parent IB/vmw_pvrdma: Switch from dma_device to dev.parent IB/usnic: Switch from dma_device to dev.parent IB/qib: Switch from dma_device to dev.parent IB/qedr: Switch from dma_device to dev.parent IB/ocrdma: Switch from dma_device to dev.parent IB/nes: Remove a superfluous assignment statement IB/mthca: Switch from dma_device to dev.parent IB/mlx5: Switch from dma_device to dev.parent IB/mlx4: Switch from dma_device to dev.parent IB/i40iw: Remove a superfluous assignment statement IB/hns: Switch from dma_device to dev.parent ...

treewide: Move dma_ops from struct dev_archdata into struct device

2017-01-24T17:23:35Z

Some but not all architectures provide set_dma_ops(). Move dma_ops from struct dev_archdata into struct device such that it becomes possible on all architectures to configure dma_ops per device. Signed-off-by: Bart Van Assche Acked-by: Greg Kroah-Hartman Cc: Benjamin Herrenschmidt Cc: Boris Ostrovsky Cc: David Woodhouse Cc: Juergen Gross Cc: H. Peter Anvin Cc: Ingo Molnar Cc: linux-arch@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Russell King Cc: x86@kernel.org Signed-off-by: Doug Ledford

treewide: Constify most dma_map_ops structures

2017-01-24T17:23:35Z

Most dma_map_ops structures are never modified. Constify these structures such that these can be write-protected. This patch has been generated as follows: git grep -l 'struct dma_map_ops' | xargs -d\\n sed -i \ -e 's/struct dma_map_ops/const struct dma_map_ops/g' \ -e 's/const struct dma_map_ops {/struct dma_map_ops {/g' \ -e 's/^const struct dma_map_ops;$/struct dma_map_ops;/' \ -e 's/const const struct dma_map_ops /const struct dma_map_ops /g'; sed -i -e 's/const $struct dma_map_ops intel_dma_ops$/\1/' \ $(git grep -l 'struct dma_map_ops intel_dma_ops'); sed -i -e 's/const $struct dma_map_ops dma_iommu_ops$/\1/' \ $(git grep -l 'struct dma_map_ops' | grep ^arch/powerpc); sed -i -e '/^struct vmd_dev {$/,/^};$/ s/const $struct dma_map_ops[[:blank:]]dma_ops;$/\1/' \ -e '/^static void vmd_setup_dma_ops/,/^}$/ s/const $struct dma_map_ops \*dest$/\1/' \ -e 's/const $struct dma_map_ops \*dest = \&vmd->dma_ops$/\1/' \ drivers/pci/host/*.c sed -i -e '/^void __init pci_iommu_alloc(void)$/,/^}$/ s/dma_ops->/intel_dma_ops./' arch/ia64/kernel/pci-dma.c sed -i -e 's/static const struct dma_map_ops sn_dma_ops/static struct dma_map_ops sn_dma_ops/' arch/ia64/sn/pci/pci_dma.c sed -i -e 's/(const struct dma_map_ops \*)//' drivers/misc/mic/bus/vop_bus.c Signed-off-by: Bart Van Assche Reviewed-by: Christoph Hellwig Cc: Benjamin Herrenschmidt Cc: Boris Ostrovsky Cc: David Woodhouse Cc: Juergen Gross Cc: H. Peter Anvin Cc: Ingo Molnar Cc: linux-arch@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Russell King Cc: x86@kernel.org Signed-off-by: Doug Ledford

misc: mic: double free on ioctl error path

2017-01-10T20:46:41Z

This function only has one caller. Freeing "vdev" here leads to a use after free bug. There are several other error paths in this function but this is the only one which frees "vdev". It looks like the kfree() can be safely removed. Fixes: 61e9c905df78 ("misc: mic: Enable VOP host side functionality") Signed-off-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman