linux/drivers/misc, branch v4.8

lkdtm: adjust usercopy tests to bypass const checks

2016-09-06T19:17:30Z

The hardened usercopy is now consistently avoiding checks against const sizes, since we really only want to perform runtime bounds checking on lengths that weren't known at build time. To test the hardened usercopy code, we must force the length arguments to be seen as non-const. Signed-off-by: Kees Cook

Merge tag 'char-misc-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2016-09-03T18:38:43Z

Pull char/misc driver fixes from Greg KH: "Here are a number of small driver fixes for 4.8-rc5. The largest thing here is deleting an obsolete driver, drivers/misc/bh1780gli.c, as the functionality of it was replaced by an iio driver a while ago. The other fixes are things that have been reported, or reverts of broken stuff (the binder change). All of these changes have been in linux-next for a while with no reported issues" * tag 'char-misc-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: thunderbolt: Don't declare Falcon Ridge unsupported thunderbolt: Add support for INTEL_FALCON_RIDGE_2C controller. thunderbolt: Fix resume quirk for Falcon Ridge 4C. lkdtm: Mark lkdtm_rodata_do_nothing() notrace mei: me: disable driver on SPT SPS firmware Revert "android: binder: fix dangling pointer comparison" drivers/iio/light/Kconfig: SENSORS_BH1780 cleanup android: binder: fix dangling pointer comparison misc: delete bh1780 driver

lkdtm: Mark lkdtm_rodata_do_nothing() notrace

2016-08-31T11:12:38Z

lkdtm_rodata_do_nothing() is an empty function which is generated in order to test the non-executability of rodata. Currently if function tracing is enabled then an mcount callsite will be generated for lkdtm_rodata_do_nothing(), and it will appear in the list of available functions for function tracing (available_filter_functions). Given it's purpose purely as a test function, it seems preferable for lkdtm_rodata_do_nothing() to be marked notrace, so it doesn't appear as traceable. This also avoids triggering a linker bug on powerpc: https://sourceware.org/bugzilla/show_bug.cgi?id=20428 When the linker sees code that needs to generate a call stub, eg. a branch to mcount(), it assumes the section is executable and dereferences a NULL pointer leading to a linker segfault. Marking lkdtm_rodata_do_nothing() notrace avoids triggering the bug because the function contains no other function calls. Signed-off-by: Michael Ellerman Signed-off-by: Kees Cook Signed-off-by: Greg Kroah-Hartman

mei: me: disable driver on SPT SPS firmware

2016-08-30T12:34:04Z

Sunrise Point PCH with SPS Firmware doesn't expose working MEI interface, we need to quirk it out. The SPS Firmware is identifiable only on the first PCI function of the device. Cc: #4.6+ Tested-by: Sujith Pandel Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman

cxl: use pcibios_free_controller_deferred() when removing vPHBs

2016-08-22T01:09:33Z

When cxl removes a vPHB, it's possible that the pci_controller may be freed before all references to the devices on the vPHB have been released. This in turn causes an invalid memory access when the devices are eventually released, as pcibios_release_device() attempts to call the phb's release_device hook. In cxl_pci_vphb_remove(), remove the existing call to pcibios_free_controller(). Instead, use pcibios_free_controller_deferred() to free the pci_controller after all devices have been released. Export pci_set_host_bridge_release() so we can do this. Cc: stable@vger.kernel.org Signed-off-by: Andrew Donnellan Reviewed-by: Matthew R. Ochs Acked-by: Ian Munsie Signed-off-by: Benjamin Herrenschmidt

misc: delete bh1780 driver

2016-08-15T13:48:23Z

The Rohm BH1780 ambient light sensor has a new driver with extended functionality (proper runtime PM) in the appropriate framework IIO, it can be found at: drivers/iio/light/bh1780.c The MISC driver symbol CONFIG_SENSORS_BH1780 does not appear in any defconfigs, so it should safe to delete. Cc: Hemanth V Signed-off-by: Linus Walleij Signed-off-by: Greg Kroah-Hartman

Merge tag 'powerpc-4.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2016-08-12T19:09:44Z

Pull powerpc fixes from Michael Ellerman: "Some powerpc fixes for 4.8: Misc: - powerpc/vdso: Fix build rules to rebuild vdsos correctly from Nicholas Piggin - powerpc/ptrace: Fix coredump since ptrace TM changes from Cyril Bur - powerpc/32: Fix csum_partial_copy_generic() from Christophe Leroy - cxl: Set psl_fir_cntl to production environment value from Frederic Barrat - powerpc/eeh: Switch to conventional PCI address output in EEH log from Guilherme G. Piccoli - cxl: Use fixed width predefined types in data structure. from Philippe Bergheaud - powerpc/vdso: Add missing include file from Guenter Roeck - powerpc: Fix unused function warning 'lmb_to_memblock' from Alastair D'Silva - powerpc/powernv/ioda: Fix TCE invalidate to work in real mode again from Alexey Kardashevskiy - powerpc/cell: Add missing error code in spufs_mkgang() from Dan Carpenter - crypto: crc32c-vpmsum - Convert to CPU feature based module autoloading from Anton Blanchard - powerpc/pasemi: Fix coherent_dma_mask for dma engine from Darren Stevens Benjamin Herrenschmidt: - powerpc/32: Fix crash during static key init - powerpc: Update obsolete comment in setup_32.c about early_init() - powerpc: Print the kernel load address at the end of prom_init() - powerpc/pnv/pci: Fix incorrect PE reservation attempt on some 64-bit BARs - powerpc/xics: Properly set Edge/Level type and enable resend Mahesh Salgaonkar: - powerpc/book3s: Fix MCE console messages for unrecoverable MCE. - powerpc/powernv: Fix MCE handler to avoid trashing CR0/CR1 registers. - powerpc/powernv: Move IDLE_STATE_ENTER_SEQ macro to cpuidle.h - powerpc/powernv: Load correct TOC pointer while waking up from winkle. Andrew Donnellan: - cxl: Fix sparse warnings - cxl: Fix NULL dereference in cxl_context_init() on PowerVM guests Michael Ellerman: - selftests/powerpc: Specify we expect to build with std=gnu99 - powerpc/Makefile: Use cflags-y/aflags-y for setting endian options - powerpc/pci: Fix endian bug in fixed PHB numbering" * tag 'powerpc-4.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (26 commits) selftests/powerpc: Specify we expect to build with std=gnu99 powerpc/vdso: Fix build rules to rebuild vdsos correctly powerpc/Makefile: Use cflags-y/aflags-y for setting endian options powerpc/32: Fix crash during static key init powerpc: Update obsolete comment in setup_32.c about early_init() powerpc: Print the kernel load address at the end of prom_init() powerpc/ptrace: Fix coredump since ptrace TM changes powerpc/32: Fix csum_partial_copy_generic() cxl: Set psl_fir_cntl to production environment value powerpc/pnv/pci: Fix incorrect PE reservation attempt on some 64-bit BARs powerpc/book3s: Fix MCE console messages for unrecoverable MCE. powerpc/pci: Fix endian bug in fixed PHB numbering powerpc/eeh: Switch to conventional PCI address output in EEH log cxl: Fix sparse warnings cxl: Fix NULL dereference in cxl_context_init() on PowerVM guests cxl: Use fixed width predefined types in data structure. powerpc/vdso: Add missing include file powerpc: Fix unused function warning 'lmb_to_memblock' powerpc/powernv: Fix MCE handler to avoid trashing CR0/CR1 registers. powerpc/powernv: Move IDLE_STATE_ENTER_SEQ macro to cpuidle.h ...

cxl: Set psl_fir_cntl to production environment value

2016-08-10T04:02:45Z

Switch the setting of psl_fir_cntl from debug to production environment recommended value. It mostly affects the PSL behavior when an error is raised in psl_fir1/2. Tested with cxlflash. Signed-off-by: Frederic Barrat Reviewed-by: Uma Krishnan Signed-off-by: Michael Ellerman

cxl: Fix sparse warnings

2016-08-09T06:52:02Z

Make native_irq_wait() static and use NULL rather than 0 to initialise phb->cfg_data in cxl_pci_vphb_add() to remove sparse warnings. Signed-off-by: Andrew Donnellan Reviewed-by: Matthew R. Ochs Acked-by: Ian Munsie Signed-off-by: Michael Ellerman

cxl: Fix NULL dereference in cxl_context_init() on PowerVM guests

2016-08-09T06:52:02Z

Commit f67a6722d650 ("cxl: Workaround PE=0 hardware limitation in Mellanox CX4") added a "min_pe" field to struct cxl_service_layer_ops, to allow us to work around a Mellanox CX-4 hardware limitation. When allocating the PE number in cxl_context_init(), we read from ctx->afu->adapter->native->sl_ops->min_pe to get the minimum PE number. Unsurprisingly, in a PowerVM guest ctx->afu->adapter->native is NULL, and guests don't have a cxl_service_layer_ops struct anywhere. Move min_pe from struct cxl_service_layer_ops to struct cxl so it's accessible in both native and PowerVM environments. For the Mellanox CX-4, set the min_pe value in set_sl_ops(). Fixes: f67a6722d650 ("cxl: Workaround PE=0 hardware limitation in Mellanox CX4") Reported-by: Frederic Barrat Signed-off-by: Andrew Donnellan Acked-by: Ian Munsie Reviewed-by: Frederic Barrat Signed-off-by: Michael Ellerman