linux/drivers/misc, branch v6.15

Merge tag 'pci-v6.15-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

2025-04-26T20:02:36Z

Pull PCI fixes from Bjorn Helgaas: - When releasing a start-aligned resource, e.g., a bridge window, save start/end/flags for the next assignment attempt; fixes a v6.15-rc1 regression (Ilpo Järvinen) - Move set_pcie_speed.sh from TEST_PROGS to TEST_FILE; fixes a bwctrl selftest v6.15-rc1 regression (Ilpo Järvinen) - Add Manivannan Sadhasivam as maintainer of native host bridge and endpoint drivers (Manivannan Sadhasivam) - In endpoint test driver, defer IRQ allocation from .probe() until ioctl() to fix a regression on platforms where the Vendor/Device ID match doesn't include driver_data (Niklas Cassel) * tag 'pci-v6.15-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: misc: pci_endpoint_test: Defer IRQ allocation until ioctl(PCITEST_SET_IRQTYPE) MAINTAINERS: Move Manivannan Sadhasivam as PCI Native host bridge and endpoint maintainer selftests/pcie_bwctrl: Fix test progs list PCI: Restore assigned resources fully after release

misc: pci_endpoint_test: Defer IRQ allocation until ioctl(PCITEST_SET_IRQTYPE)

2025-04-23T22:04:48Z

Commit a402006d48a9 ("misc: pci_endpoint_test: Remove global 'irq_type' and 'no_msi'") changed so that the default IRQ vector requested by pci_endpoint_test_probe() was no longer the module param 'irq_type', but instead test->irq_type. test->irq_type is by default IRQ_TYPE_UNDEFINED (until someone calls ioctl(PCITEST_SET_IRQTYPE)). However, the commit also changed so that after initializing test->irq_type to IRQ_TYPE_UNDEFINED, it also overrides it with driver_data->irq_type, if the PCI device and vendor ID provides driver_data. This causes a regression for PCI device and vendor IDs that do not provide driver_data, and the host side pci_endpoint_test_driver driver failed to probe on such platforms: pci-endpoint-test 0001:01:00.0: Invalid IRQ type selected pci-endpoint-test 0001:01:00.0: probe with driver pci-endpoint-test failed with error -22 Considering that the pci endpoint selftests and the old pcitest.sh always call ioctl(PCITEST_SET_IRQTYPE) before performing any test that requires IRQs, fix the regression by removing the allocation of IRQs in pci_endpoint_test_probe(). The IRQ allocation will occur when ioctl(PCITEST_SET_IRQTYPE) is called. A positive side effect of this is that even if the endpoint controller has issues with IRQs, the user can do still do all the tests/ioctls() that do not require working IRQs, e.g. PCITEST_BAR and PCITEST_BARS. This also means that we can remove the now unused irq_type from driver_data. The irq_type will always be the one configured by the user using ioctl(PCITEST_SET_IRQTYPE). (A user that does not know, or care which irq_type that is used, can use PCITEST_IRQ_TYPE_AUTO. This has superseded the need for a default irq_type in driver_data.) [bhelgaas: add probe failure details] Fixes: a402006d48a9c ("misc: pci_endpoint_test: Remove global 'irq_type' and 'no_msi'") Signed-off-by: Niklas Cassel Signed-off-by: Manivannan Sadhasivam Signed-off-by: Bjorn Helgaas Tested-by: Frank Li Reviewed-by: Manivannan Sadhasivam Reviewed-by: Frank Li Link: https://patch.msgid.link/20250416142825.336554-2-cassel@kernel.org

mei: vsc: Use struct vsc_tp_packet as vsc-tp tx_buf and rx_buf type

2025-04-15T16:22:39Z

vsc_tp.tx_buf and vsc_tp.rx_buf point to a struct vsc_tp_packet, use the correct type instead of "void *" and use sizeof(*ptr) when allocating memory for these buffers. Signed-off-by: Hans de Goede Reviewed-by: Alexander Usyskin Reviewed-by: Sakari Ailus Link: https://lore.kernel.org/r/20250318141203.94342-3-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman

mei: vsc: Fix fortify-panic caused by invalid counted_by() use

2025-04-15T16:22:39Z

gcc 15 honors the __counted_by(len) attribute on vsc_tp_packet.buf[] and the vsc-tp.c code is using this in a wrong way. len does not contain the available size in the buffer, it contains the actual packet length *without* the crc. So as soon as vsc_tp_xfer() tries to add the crc to buf[] the fortify-panic handler gets triggered: [ 80.842193] memcpy: detected buffer overflow: 4 byte write of buffer size 0 [ 80.842243] WARNING: CPU: 4 PID: 272 at lib/string_helpers.c:1032 __fortify_report+0x45/0x50 ... [ 80.843175] __fortify_panic+0x9/0xb [ 80.843186] vsc_tp_xfer.cold+0x67/0x67 [mei_vsc_hw] [ 80.843210] ? seqcount_lockdep_reader_access.constprop.0+0x82/0x90 [ 80.843229] ? lockdep_hardirqs_on+0x7c/0x110 [ 80.843250] mei_vsc_hw_start+0x98/0x120 [mei_vsc] [ 80.843270] mei_reset+0x11d/0x420 [mei] The easiest fix would be to just drop the counted-by but with the exception of the ack buffer in vsc_tp_xfer_helper() which only contains enough room for the packet-header, all other uses of vsc_tp_packet always use a buffer of VSC_TP_MAX_XFER_SIZE bytes for the packet. Instead of just dropping the counted-by, split the vsc_tp_packet struct definition into a header and a full-packet definition and use a fixed size buf[] in the packet definition, this way fortify-source buffer overrun checking still works when enabled. Fixes: 566f5ca97680 ("mei: Add transport driver for IVSC device") Cc: stable@kernel.org Signed-off-by: Hans de Goede Reviewed-by: Alexander Usyskin Reviewed-by: Sakari Ailus Link: https://lore.kernel.org/r/20250318141203.94342-2-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman

misc: microchip: pci1xxxx: Fix incorrect IRQ status handling during ack

2025-04-15T14:22:19Z

Under irq_ack, pci1xxxx_assign_bit reads the current interrupt status, modifies and writes the entire value back. Since, the IRQ status bit gets cleared on writing back, the better approach is to directly write the bitmask to the register in order to preserve the value. Fixes: 1f4d8ae231f4 ("misc: microchip: pci1xxxx: Add gpio irq handler and irq helper functions irq_ack, irq_mask, irq_unmask and irq_set_type of irq_chip.") Cc: stable Signed-off-by: Rengarajan S Link: https://lore.kernel.org/r/20250313170856.20868-3-rengarajan.s@microchip.com Signed-off-by: Greg Kroah-Hartman

misc: microchip: pci1xxxx: Fix Kernel panic during IRQ handler registration

2025-04-15T14:22:15Z

Resolve kernel panic while accessing IRQ handler associated with the generated IRQ. This is done by acquiring the spinlock and storing the current interrupt state before handling the interrupt request using generic_handle_irq. A previous fix patch was submitted where 'generic_handle_irq' was replaced with 'handle_nested_irq'. However, this change also causes the kernel panic where after determining which GPIO triggered the interrupt and attempting to call handle_nested_irq with the mapped IRQ number, leads to a failure in locating the registered handler. Fixes: 194f9f94a516 ("misc: microchip: pci1xxxx: Resolve kernel panic during GPIO IRQ handling") Cc: stable Signed-off-by: Rengarajan S Link: https://lore.kernel.org/r/20250313170856.20868-2-rengarajan.s@microchip.com Signed-off-by: Greg Kroah-Hartman

mei: me: add panther lake H DID

2025-04-15T14:22:15Z

Add Panther Lake H device id. Cc: stable Co-developed-by: Tomas Winkler Signed-off-by: Tomas Winkler Signed-off-by: Alexander Usyskin Link: https://lore.kernel.org/r/20250408130005.1358140-1-alexander.usyskin@intel.com Signed-off-by: Greg Kroah-Hartman

treewide: Switch/rename to timer_delete[_sync]()

2025-04-05T08:30:12Z

timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree over and remove the historical wrapper inlines. Conversion was done with coccinelle plus manual fixups where necessary. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar

Merge tag 'powerpc-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2025-04-02T19:35:49Z

Pull more powerpc updates from Michael Ellerman: - Remove the IBM CAPI (cxl) driver Thanks to Andrew Donnellan. * tag 'powerpc-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: docs: Fix references to IBM CAPI (cxl) removal version cxl: Remove driver

Merge tag 'objtool-urgent-2025-04-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2025-04-02T17:30:10Z

Pull objtool fixes from Ingo Molnar: "These are objtool fixes and updates by Josh Poimboeuf, centered around the fallout from the new CONFIG_OBJTOOL_WERROR=y feature, which, despite its default-off nature, increased the profile/impact of objtool warnings: - Improve error handling and the presentation of warnings/errors - Revert the new summary warning line that some test-bot tools interpreted as new regressions - Fix a number of objtool warnings in various drivers, core kernel code and architecture code. About half of them are potential problems related to out-of-bounds accesses or potential undefined behavior, the other half are additional objtool annotations - Update objtool to latest (known) compiler quirks and objtool bugs triggered by compiler code generation - Misc fixes" * tag 'objtool-urgent-2025-04-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) objtool/loongarch: Add unwind hints in prepare_frametrace() rcu-tasks: Always inline rcu_irq_work_resched() context_tracking: Always inline ct_{nmi,irq}_{enter,exit}() sched/smt: Always inline sched_smt_active() objtool: Fix verbose disassembly if CROSS_COMPILE isn't set objtool: Change "warning:" to "error: " for fatal errors objtool: Always fail on fatal errors Revert "objtool: Increase per-function WARN_FUNC() rate limit" objtool: Append "()" to function name in "unexpected end of section" warning objtool: Ignore end-of-section jumps for KCOV/GCOV objtool: Silence more KCOV warnings, part 2 objtool, drm/vmwgfx: Don't ignore vmw_send_msg() for ORC objtool: Fix STACK_FRAME_NON_STANDARD for cold subfunctions objtool: Fix segfault in ignore_unreachable_insn() objtool: Fix NULL printf() '%s' argument in builtin-check.c:save_argv() objtool, lkdtm: Obfuscate the do_nothing() pointer objtool, regulator: rk808: Remove potential undefined behavior in rk806_set_mode_dcdc() objtool, ASoC: codecs: wcd934x: Remove potential undefined behavior in wcd934x_slim_irq_handler() objtool, Input: cyapa - Remove undefined behavior in cyapa_update_fw_store() objtool, panic: Disable SMAP in __stack_chk_fail() ...