linux/drivers/misc, branch v6.17

treewide: rename GPIO set callbacks back to their original names

2025-08-07T08:07:06Z

The conversion of all GPIO drivers to using the .set_rv() and .set_multiple_rv() callbacks from struct gpio_chip (which - unlike their predecessors - return an integer and allow the controller drivers to indicate failures to users) is now complete and the legacy ones have been removed. Rename the new callbacks back to their original names in one sweeping change. Signed-off-by: Bartosz Golaszewski

Merge tag 'pci-v6.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

2025-08-01T20:59:07Z

Pull PCI updates from Bjorn Helgaas: "Enumeration: - Allow built-in drivers, not just modular drivers, to use async initial probing (Lukas Wunner) - Support Immediate Readiness even on devices with no PM Capability (Sean Christopherson) - Consolidate definition of PCIE_RESET_CONFIG_WAIT_MS (100ms), the required delay between a reset and sending config requests to a device (Niklas Cassel) - Add pci_is_display() to check for "Display" base class and use it in ALSA hda, vfio, vga_switcheroo, vt-d (Mario Limonciello) - Allow 'isolated PCI functions' (multi-function devices without a function 0) for LoongArch, similar to s390 and jailhouse (Huacai Chen) Power control: - Add ability to enable optional slot clock for cases where the PCIe host controller and the slot are supplied by different clocks (Marek Vasut) PCIe native device hotplug: - Fix runtime PM ref imbalance on Hot-Plug Capable ports caused by misinterpreting a config read failure after a device has been removed (Lukas Wunner) - Avoid creating a useless PCIe port service device for pciehp if the slot is handled by the ACPI hotplug driver (Lukas Wunner) - Ignore ACPI hotplug slots when calculating depth of pciehp hotplug ports (Lukas Wunner) Virtualization: - Save VF resizable BAR state and restore it after reset (Michał Winiarski) - Allow IOV resources (VF BARs) to be resized (Michał Winiarski) - Add pci_iov_vf_bar_set_size() so drivers can control VF BAR size (Michał Winiarski) Endpoint framework: - Add RC-to-EP doorbell support using platform MSI controller, including a test case (Frank Li) - Allow BAR assignment via configfs so platforms have flexibility in determining BAR usage (Jerome Brunet) Native PCIe controller drivers: - Convert amazon,al-alpine-v[23]-pcie, apm,xgene-pcie, axis,artpec6-pcie, marvell,armada-3700-pcie, st,spear1340-pcie to DT schema format (Rob Herring) - Use dev_fwnode() instead of of_fwnode_handle() to remove OF dependency in altera (fixes an unused variable), designware-host, mediatek, mediatek-gen3, mobiveil, plda, xilinx, xilinx-dma, xilinx-nwl (Jiri Slaby, Arnd Bergmann) - Convert aardvark, altera, brcmstb, designware-host, iproc, mediatek, mediatek-gen3, mobiveil, plda, rcar-host, vmd, xilinx, xilinx-dma, xilinx-nwl from using pci_msi_create_irq_domain() to using msi_create_parent_irq_domain() instead; this makes the interrupt controller per-PCI device, allows dynamic allocation of vectors after initialization, and allows support of IMS (Nam Cao) APM X-Gene PCIe controller driver: - Rewrite MSI handling to MSI CPU affinity, drop useless CPU hotplug bits, use device-managed memory allocations, and clean things up (Marc Zyngier) - Probe xgene-msi as a standard platform driver rather than a subsys_initcall (Marc Zyngier) Broadcom STB PCIe controller driver: - Add optional DT 'num-lanes' property and if present, use it to override the Maximum Link Width advertised in Link Capabilities (Jim Quinlan) Cadence PCIe controller driver: - Use PCIe Message routing types from the PCI core rather than defining private ones (Hans Zhang) Freescale i.MX6 PCIe controller driver: - Add IMX8MQ_EP third 64-bit BAR in epc_features (Richard Zhu) - Add IMX8MM_EP and IMX8MP_EP fixed 256-byte BAR 4 in epc_features (Richard Zhu) - Configure LUT for MSI/IOMMU in Endpoint mode so Root Complex can trigger doorbel on Endpoint (Frank Li) - Remove apps_reset (LTSSM_EN) from imx_pcie_{assert,deassert}_core_reset(), which fixes a hotplug regression on i.MX8MM (Richard Zhu) - Delay Endpoint link start until configfs 'start' written (Richard Zhu) Intel VMD host bridge driver: - Add Intel Panther Lake (PTL)-H/P/U Vendor ID (George D Sworo) Qualcomm PCIe controller driver: - Add DT binding and driver support for SA8255p, which supports ECAM for Configuration Space access (Mayank Rana) - Update DT binding and driver to describe PHYs and per-Root Port resets in a Root Port stanza and deprecate describing them in the host bridge; this makes it possible to support multiple Root Ports in the future (Krishna Chaitanya Chundru) - Add Qualcomm QCS615 to SM8150 DT binding (Ziyue Zhang) - Add Qualcomm QCS8300 to SA8775p DT binding (Ziyue Zhang) - Drop TBU and ref clocks from Qualcomm SM8150 and SC8180x DT bindings (Konrad Dybcio) - Document 'link_down' reset in Qualcomm SA8775P DT binding (Ziyue Zhang) - Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ (Niklas Cassel) Rockchip PCIe controller driver: - Drop unused PCIe Message routing and code definitions (Hans Zhang) - Remove several unused header includes (Hans Zhang) - Use standard PCIe config register definitions instead of rockchip-specific redefinitions (Geraldo Nascimento) - Set Target Link Speed to 5.0 GT/s before retraining so we have a chance to train at a higher speed (Geraldo Nascimento) Rockchip DesignWare PCIe controller driver: - Prevent race between link training and register update via DBI by inhibiting link training after hot reset and link down (Wilfred Mallawa) - Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ (Niklas Cassel) Sophgo PCIe controller driver: - Add DT binding and driver for Sophgo SG2044 PCIe controller driver in Root Complex mode (Inochi Amaoto) Synopsys DesignWare PCIe controller driver: - Add required PCIE_RESET_CONFIG_WAIT_MS after waiting for Link up on Ports that support > 5.0 GT/s. Slower Ports still rely on the not-quite-correct PCIE_LINK_WAIT_SLEEP_MS 90ms default delay while waiting for the Link (Niklas Cassel)" * tag 'pci-v6.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (116 commits) dt-bindings: PCI: qcom,pcie-sa8775p: Document 'link_down' reset dt-bindings: PCI: Remove 83xx-512x-pci.txt dt-bindings: PCI: Convert amazon,al-alpine-v[23]-pcie to DT schema dt-bindings: PCI: Convert marvell,armada-3700-pcie to DT schema dt-bindings: PCI: Convert apm,xgene-pcie to DT schema dt-bindings: PCI: Convert axis,artpec6-pcie to DT schema dt-bindings: PCI: Convert st,spear1340-pcie to DT schema PCI: Move is_pciehp check out of pciehp_is_native() PCI: pciehp: Use is_pciehp instead of is_hotplug_bridge PCI/portdrv: Use is_pciehp instead of is_hotplug_bridge PCI/ACPI: Fix runtime PM ref imbalance on Hot-Plug Capable ports selftests: pci_endpoint: Add doorbell test case misc: pci_endpoint_test: Add doorbell test case PCI: endpoint: pci-epf-test: Add doorbell test support PCI: endpoint: Add pci_epf_align_inbound_addr() helper for inbound address alignment PCI: endpoint: pci-ep-msi: Add checks for MSI parent and mutability PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller PCI: dwc: Add Sophgo SG2044 PCIe controller driver in Root Complex mode PCI: vmd: Switch to msi_create_parent_irq_domain() PCI: vmd: Convert to lock guards ...

Merge tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

2025-07-31T21:57:54Z

Pull MM updates from Andrew Morton: "As usual, many cleanups. The below blurbiage describes 42 patchsets. 21 of those are partially or fully cleanup work. "cleans up", "cleanup", "maintainability", "rationalizes", etc. I never knew the MM code was so dirty. "mm: ksm: prevent KSM from breaking merging of new VMAs" (Lorenzo Stoakes) addresses an issue with KSM's PR_SET_MEMORY_MERGE mode: newly mapped VMAs were not eligible for merging with existing adjacent VMAs. "mm/damon: introduce DAMON_STAT for simple and practical access monitoring" (SeongJae Park) adds a new kernel module which simplifies the setup and usage of DAMON in production environments. "stop passing a writeback_control to swap/shmem writeout" (Christoph Hellwig) is a cleanup to the writeback code which removes a couple of pointers from struct writeback_control. "drivers/base/node.c: optimization and cleanups" (Donet Tom) contains largely uncorrelated cleanups to the NUMA node setup and management code. "mm: userfaultfd: assorted fixes and cleanups" (Tal Zussman) does some maintenance work on the userfaultfd code. "Readahead tweaks for larger folios" (Ryan Roberts) implements some tuneups for pagecache readahead when it is reading into order>0 folios. "selftests/mm: Tweaks to the cow test" (Mark Brown) provides some cleanups and consistency improvements to the selftests code. "Optimize mremap() for large folios" (Dev Jain) does that. A 37% reduction in execution time was measured in a memset+mremap+munmap microbenchmark. "Remove zero_user()" (Matthew Wilcox) expunges zero_user() in favor of the more modern memzero_page(). "mm/huge_memory: vmf_insert_folio_*() and vmf_insert_pfn_pud() fixes" (David Hildenbrand) addresses some warts which David noticed in the huge page code. These were not known to be causing any issues at this time. "mm/damon: use alloc_migrate_target() for DAMOS_MIGRATE_{HOT,COLD" (SeongJae Park) provides some cleanup and consolidation work in DAMON. "use vm_flags_t consistently" (Lorenzo Stoakes) uses vm_flags_t in places where we were inappropriately using other types. "mm/memfd: Reserve hugetlb folios before allocation" (Vivek Kasireddy) increases the reliability of large page allocation in the memfd code. "mm: Remove pXX_devmap page table bit and pfn_t type" (Alistair Popple) removes several now-unneeded PFN_* flags. "mm/damon: decouple sysfs from core" (SeongJae Park) implememnts some cleanup and maintainability work in the DAMON sysfs layer. "madvise cleanup" (Lorenzo Stoakes) does quite a lot of cleanup/maintenance work in the madvise() code. "madvise anon_name cleanups" (Vlastimil Babka) provides additional cleanups on top or Lorenzo's effort. "Implement numa node notifier" (Oscar Salvador) creates a standalone notifier for NUMA node memory state changes. Previously these were lumped under the more general memory on/offline notifier. "Make MIGRATE_ISOLATE a standalone bit" (Zi Yan) cleans up the pageblock isolation code and fixes a potential issue which doesn't seem to cause any problems in practice. "selftests/damon: add python and drgn based DAMON sysfs functionality tests" (SeongJae Park) adds additional drgn- and python-based DAMON selftests which are more comprehensive than the existing selftest suite. "Misc rework on hugetlb faulting path" (Oscar Salvador) fixes a rather obscure deadlock in the hugetlb fault code and follows that fix with a series of cleanups. "cma: factor out allocation logic from __cma_declare_contiguous_nid" (Mike Rapoport) rationalizes and cleans up the highmem-specific code in the CMA allocator. "mm/migration: rework movable_ops page migration (part 1)" (David Hildenbrand) provides cleanups and future-preparedness to the migration code. "mm/damon: add trace events for auto-tuned monitoring intervals and DAMOS quota" (SeongJae Park) adds some tracepoints to some DAMON auto-tuning code. "mm/damon: fix misc bugs in DAMON modules" (SeongJae Park) does that. "mm/damon: misc cleanups" (SeongJae Park) also does what it claims. "mm: folio_pte_batch() improvements" (David Hildenbrand) cleans up the large folio PTE batching code. "mm/damon/vaddr: Allow interleaving in migrate_{hot,cold} actions" (SeongJae Park) facilitates dynamic alteration of DAMON's inter-node allocation policy. "Remove unmap_and_put_page()" (Vishal Moola) provides a couple of page->folio conversions. "mm: per-node proactive reclaim" (Davidlohr Bueso) implements a per-node control of proactive reclaim - beyond the current memcg-based implementation. "mm/damon: remove damon_callback" (SeongJae Park) replaces the damon_callback interface with a more general and powerful damon_call()+damos_walk() interface. "mm/mremap: permit mremap() move of multiple VMAs" (Lorenzo Stoakes) implements a number of mremap cleanups (of course) in preparation for adding new mremap() functionality: newly permit the remapping of multiple VMAs when the user is specifying MREMAP_FIXED. It still excludes some specialized situations where this cannot be performed reliably. "drop hugetlb_free_pgd_range()" (Anthony Yznaga) switches some sparc hugetlb code over to the generic version and removes the thus-unneeded hugetlb_free_pgd_range(). "mm/damon/sysfs: support periodic and automated stats update" (SeongJae Park) augments the present userspace-requested update of DAMON sysfs monitoring files. Automatic update is now provided, along with a tunable to control the update interval. "Some randome fixes and cleanups to swapfile" (Kemeng Shi) does what is claims. "mm: introduce snapshot_page" (Luiz Capitulino and David Hildenbrand) provides (and uses) a means by which debug-style functions can grab a copy of a pageframe and inspect it locklessly without tripping over the races inherent in operating on the live pageframe directly. "use per-vma locks for /proc/pid/maps reads" (Suren Baghdasaryan) addresses the large contention issues which can be triggered by reads from that procfs file. Latencies are reduced by more than half in some situations. The series also introduces several new selftests for the /proc/pid/maps interface. "__folio_split() clean up" (Zi Yan) cleans up __folio_split()! "Optimize mprotect() for large folios" (Dev Jain) provides some quite large (>3x) speedups to mprotect() when dealing with large folios. "selftests/mm: reuse FORCE_READ to replace "asm volatile("" : "+r" (XXX));" and some cleanup" (wang lian) does some cleanup work in the selftests code. "tools/testing: expand mremap testing" (Lorenzo Stoakes) extends the mremap() selftest in several ways, including adding more checking of Lorenzo's recently added "permit mremap() move of multiple VMAs" feature. "selftests/damon/sysfs.py: test all parameters" (SeongJae Park) extends the DAMON sysfs interface selftest so that it tests all possible user-requested parameters. Rather than the present minimal subset" * tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (370 commits) MAINTAINERS: add missing headers to mempory policy & migration section MAINTAINERS: add missing file to cgroup section MAINTAINERS: add MM MISC section, add missing files to MISC and CORE MAINTAINERS: add missing zsmalloc file MAINTAINERS: add missing files to page alloc section MAINTAINERS: add missing shrinker files MAINTAINERS: move memremap.[ch] to hotplug section MAINTAINERS: add missing mm_slot.h file THP section MAINTAINERS: add missing interval_tree.c to memory mapping section MAINTAINERS: add missing percpu-internal.h file to per-cpu section mm/page_alloc: remove trace_mm_alloc_contig_migrate_range_info() selftests/damon: introduce _common.sh to host shared function selftests/damon/sysfs.py: test runtime reduction of DAMON parameters selftests/damon/sysfs.py: test non-default parameters runtime commit selftests/damon/sysfs.py: generalize DAMON context commit assertion selftests/damon/sysfs.py: generalize monitoring attributes commit assertion selftests/damon/sysfs.py: generalize DAMOS schemes commit assertion selftests/damon/sysfs.py: test DAMOS filters commitment selftests/damon/sysfs.py: generalize DAMOS scheme commit assertion selftests/damon/sysfs.py: test DAMOS destinations commitment ...

Merge tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core

2025-07-29T19:15:39Z

Pull driver core updates from Danilo Krummrich: "debugfs: - Remove unneeded debugfs_file_{get,put}() instances - Remove last remnants of debugfs_real_fops() - Allow storing non-const void * in struct debugfs_inode_info::aux sysfs: - Switch back to attribute_group::bin_attrs (treewide) - Switch back to bin_attribute::read()/write() (treewide) - Constify internal references to 'struct bin_attribute' Support cache-ids for device-tree systems: - Add arch hook arch_compact_of_hwid() - Use arch_compact_of_hwid() to compact MPIDR values on arm64 Rust: - Device: - Introduce CoreInternal device context (for bus internal methods) - Provide generic drvdata accessors for bus devices - Provide Driver::unbind() callbacks - Use the infrastructure above for auxiliary, PCI and platform - Implement Device::as_bound() - Rename Device::as_ref() to Device::from_raw() (treewide) - Implement fwnode and device property abstractions - Implement example usage in the Rust platform sample driver - Devres: - Remove the inner reference count (Arc) and use pin-init instead - Replace Devres::new_foreign_owned() with devres::register() - Require T to be Send in Devres - Initialize the data kept inside a Devres last - Provide an accessor for the Devres associated Device - Device ID: - Add support for ACPI device IDs and driver match tables - Split up generic device ID infrastructure - Use generic device ID infrastructure in net::phy - DMA: - Implement the dma::Device trait - Add DMA mask accessors to dma::Device - Implement dma::Device for PCI and platform devices - Use DMA masks from the DMA sample module - I/O: - Implement abstraction for resource regions (struct resource) - Implement resource-based ioremap() abstractions - Provide platform device accessors for I/O (remap) requests - Misc: - Support fallible PinInit types in Revocable - Implement Wrapper for Opaque - Merge pin-init blanket dependencies (for Devres) Misc: - Fix OF node leak in auxiliary_device_create() - Use util macros in device property iterators - Improve kobject sample code - Add device_link_test() for testing device link flags - Fix typo in Documentation/ABI/testing/sysfs-kernel-address_bits - Hint to prefer container_of_const() over container_of()" * tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (84 commits) rust: io: fix broken intra-doc links to `platform::Device` rust: io: fix broken intra-doc link to missing `flags` module rust: io: mem: enable IoRequest doc-tests rust: platform: add resource accessors rust: io: mem: add a generic iomem abstraction rust: io: add resource abstraction rust: samples: dma: set DMA mask rust: platform: implement the `dma::Device` trait rust: pci: implement the `dma::Device` trait rust: dma: add DMA addressing capabilities rust: dma: implement `dma::Device` trait rust: net::phy Change module_phy_driver macro to use module_device_table macro rust: net::phy represent DeviceId as transparent wrapper over mdio_device_id rust: device_id: split out index support into a separate trait device: rust: rename Device::as_ref() to Device::from_raw() arm64: cacheinfo: Provide helper to compress MPIDR value into u32 cacheinfo: Add arch hook to compress CPU h/w id into 32 bits for cache-id cacheinfo: Set cache 'id' based on DT data container_of: Document container_of() is not to be used in new code driver core: auxiliary bus: fix OF node leak ...

Merge tag 'soc-drivers-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2025-07-29T18:13:27Z

Pull SoC driver updates from Arnd Bergmann: "Changes are all over the place, but very little sticks out as noteworthy. There is a new misc driver for the Raspberry Pi 5's RP1 multifunction I/O chip, along with hooking it up to the pinctrl and clk frameworks. The reset controller and memory subsystems have mainly small updates, but there are two new reset drivers for the K230 and VC1800B SoCs, and new memory driver support for Tegra264. The ARM SMCCC and SCMI firmware drivers gain a few more features that should help them be supported across more environments. Similarly, the SoC specific firmware on Tegra and Qualcomm get minor enhancements and chip support. In the drivers/soc/ directory, the ASPEED LPC snoop driver gets an overhaul for code robustness, the Tegra and Qualcomm and NXP drivers grow to support more chips, while the Hisilicon, Mediatek and Renesas drivers see mostly janitorial fixes" * tag 'soc-drivers-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (100 commits) bus: del unnecessary init var soc: fsl: qe: convert set_multiple() to returning an integer pinctrl: rp1: use new GPIO line value setter callbacks soc: hisilicon: kunpeng_hccs: Fix incorrect log information dt-bindings: soc: qcom: qcom,pmic-glink: document Milos compatible dt-bindings: soc: qcom,aoss-qmp: document the Milos Always-On Subsystem side channel dt-bindings: firmware: qcom,scm: document Milos SCM Firmware Interface soc: qcom: socinfo: Add support to retrieve APPSBL build details soc: qcom: pmic_glink: fix OF node leak soc: qcom: spmi-pmic: add more PMIC SUBTYPE IDs soc: qcom: socinfo: Add PM7550 & PMIV0108 PMICs soc: qcom: socinfo: Add SoC IDs for SM7635 family dt-bindings: arm: qcom,ids: Add SoC IDs for SM7635 family firmware: qcom: scm: request the waitqueue irq *after* initializing SCM firmware: qcom: scm: initialize tzmem before marking SCM as available firmware: qcom: scm: take struct device as argument in SHM bridge enable firmware: qcom: scm: remove unused arguments from SHM bridge routines soc: qcom: rpmh-rsc: Add RSC version 4 support memory: tegra: Add Tegra264 MC and EMC support firmware: tegra: bpmp: Fix build failure for tegra264-only config ...

Merge tag 'char-misc-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2025-07-29T16:52:01Z

Pull char / misc / IIO / other driver updates from Greg KH: "Here is the big set of char/misc/iio and other smaller driver subsystems for 6.17-rc1. It's a big set this time around, with the huge majority being in the iio subsystem with new drivers and dts files being added there. Highlights include: - IIO driver updates, additions, and changes making more code const and cleaning up some init logic - bus_type constant conversion changes - misc device test functions added - rust miscdevice minor fixup - unused function removals for some drivers - mei driver updates - mhi driver updates - interconnect driver updates - Android binder updates and test infrastructure added - small cdx driver updates - small comedi fixes - small nvmem driver updates - small pps driver updates - some acrn virt driver fixes for printk messages - other small driver updates All of these have been in linux-next with no reported issues" * tag 'char-misc-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits) binder: Use seq_buf in binder_alloc kunit tests binder: Add copyright notice to new kunit files misc: ti_fpc202: Switch to of_fwnode_handle() bus: moxtet: Use dev_fwnode() pc104: move PC104 option to drivers/Kconfig drivers: virt: acrn: Don't use %pK through printk comedi: fix race between polling and detaching interconnect: qcom: Add Milos interconnect provider driver dt-bindings: interconnect: document the RPMh Network-On-Chip Interconnect in Qualcomm Milos SoC mei: more prints with client prefix mei: bus: use cldev in prints bus: mhi: host: pci_generic: Add Telit FN990B40 modem support bus: mhi: host: Detect events pointing to unexpected TREs bus: mhi: host: pci_generic: Add Foxconn T99W696 modem bus: mhi: host: Use str_true_false() helper bus: mhi: host: pci_generic: Add support for EM929x and set MRU to 32768 for better performance. bus: mhi: host: Fix endianness of BHI vector table bus: mhi: host: pci_generic: Disable runtime PM for QDU100 bus: mhi: host: pci_generic: Fix the modem name of Foxconn T99W640 dt-bindings: interconnect: qcom,msm8998-bwmon: Allow 'nonposted-mmio' ...

Merge tag 'regulator-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

2025-07-29T05:52:02Z

Pull regulator updates from Mark Brown: "The big change in this release is the addition of Rust bindings from Daniel Almeida, allowing fairly basic consumer use with support for enable and voltage setting operations. This should be good for the vast majority of consumers. Otherwise it's been quite quiet, a few new devices supported, plus some cleanups and fixes. Summary: - Basic Rust bindings - A fix for making large voltage changes on regulators where we limit the size of voltage change we will do in one step, previously we just got as close as we could in one step - Cleanups of our usage of the PM autosuspend functions, this pulls in some PM core changes on a shared tag - Mode setting support for PCA9450 - Support for Mediatek MT6893 and MT8196 DVFSRC, Qualcomm PM7550 and PMR735B, Raspberry Pi displays and TI TPS652G1 The TI driver pulls in the MFD portion of the support for the device and the pinctrl driver which was in the same tag" * tag 'regulator-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (40 commits) regulator: mt6370: Fix spelling mistake in mt6370_regualtor_register regulator: Kconfig: Fix spelling mistake "regualtor" -> "regulator" regulator: core: repeat voltage setting request for stepped regulators regulator: rt6160: Add rt6166 vout min_uV setting for compatible MAINTAINERS: add regulator.rs to the regulator API entry rust: regulator: add a bare minimum regulator abstraction regulator: tps6286x-regulator: Fix a copy & paste error regulator: qcom-rpmh: add support for pm7550 regulators regulator: qcom-rpmh: add support for pmr735b regulators regulator: dt-bindings: qcom,rpmh: Add PMR735B compatible regulator: dt-bindings: qcom,rpmh: Add PM7550 compatible regulator: tps6594-regulator: Add TI TPS652G1 PMIC regulators regulator: tps6594-regulator: refactor variant descriptions regulator: tps6594-regulator: remove hardcoded buck config regulator: tps6594-regulator: remove interrupt_count dt-bindings: mfd: ti,tps6594: Add TI TPS652G1 PMIC pinctrl: pinctrl-tps6594: Add TPS652G1 PMIC pinctrl and GPIO misc: tps6594-pfsm: Add TI TPS652G1 PMIC PFSM mfd: tps6594: Add TI TPS652G1 support regulator: sy8827n: make enable gpio NONEXCLUSIVE ...

Merge tag 'gpio-updates-for-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

2025-07-29T04:58:46Z

Pull gpio updates from Bartosz Golaszewski: "There's one new driver (Apple SMC) and extensions to existing drivers for supporting new HW models. A lot of different impovements across drivers and in core GPIO code. Details on that are in the signed tag as usual. We managed to remove some of the legacy APIs. Arnd Bergmann started to work on making the legacy bits optional so that we may compile them only for older platforms that still really need them. Rob Herring has done a lot of work to convert legacy .txt dt-bindings for GPIO controllers to YAML. There are only a few left now in the GPIO tree. A big part of the commits in this PR concern the conversion of GPIO drivers to using the new line value setter callbacks. This conversion is now complete treewide (unless I've missed something) and once all the changes from different trees land in mainline, I'll send you another PR containing a commit dropping the legacy callbacks from the tree. As the quest to pay back technical dept never really ends, we're starting another set of interface conversions, this time it's about moving fields specific to only a handful of drivers using the gpio-mmio helper out of the core gpio_chip structure that every controller implements and uses. This cycle we introduce a new set of APIs and convert a few drivers under drivers/gpio/, next cycle we'll convert remaining modules treewide (in gpio, pinctrl and mfd trees) and finally remove the old interfaces and move the gpio-mmio fields into their own structure wrapping gpio_chip. One last change I should mention here is the rework of the sysfs interface. In 2016, we introduced the GPIO character device as the preferred alternative to the sysfs class under /sys/class/gpio. While it has seen a wide adoption with the help of its user-space counterpart - libgpiod - there are still users who prefer the simplicity of sysfs. As far as the GPIO subsystem is concerned, the problem is not the existince of the GPIO class as such but rather the fact that it exposes the global GPIO numbers to the user-space, stopping us from ever being able to remove the numberspace from the kernel. To that end, this release we introduced a parallel, limited sysfs interface that doesn't expose these numbers and only implements a subset of features that are relevant to the existing users. This is a result of several discussions over the course of last year and should allow us to remove the legacy part some time in the future. Summary: GPIOLIB core: - introduce a parallel, limited sysfs user ABI that doesn't expose the global GPIO numbers to user-space while maintaining backward compatibility with the end goal of it completely replacing the existing interface, allowing us to remove it - remove the legacy devm_gpio_request() routine which has no more users - start the process of allowing to compile-out the legacy parts of the GPIO core for users who don't need it by introducing a new Kconfig option: GPIOLIB_LEGACY - don't use global GPIO numbers in debugfs output from the core code (drivers still do it, the work is ongoing) - start the process of moving the fields specific to the gpio-mmio helper out of the core struct gpio_chip into their own structure that wraps it: create a new header with modern interfaces and convert several drivers to using it - remove the platform data structure associated with the gpio-mmio helper from the kernel after having converted all remaining users to generic device properties - remove legacy struct gpio definition as it has no more users New drivers: - add the GPIO driver for the Apple System Management Controller Driver improvements: - add support for new models to gpio-adp5585, gpio-tps65219 and gpio-pca953x - extend the interrupt support in gpio-loongson-64bit - allow to mark the simulated GPIO lines as invalid in gpio-sim - convert all remaining GPIO drivers to using the new GPIO value setter callbacks - convert gpio-rcar to using simple device power management ops callbacks - don't check if current direction of a line is output before setting the value in gpio-pisosr and ti-fpc202: the GPIO core already handles that - also drop unneeded GPIO range checks in drivers, the core already makes sure we're within bounds when calling driver callbacks - use dev_fwnode() where applicable across GPIO drivers - set line value in gpio-zynqmp-modepin and gpio-twl6040 when the user wants to change direction of the pin to output even though these drivers don't need to do anything else to actually set the direction, otherwise a call like gpiod_direction_output(d, 1) will not result in the line driver high - remove the reduntant call to pm_runtime_mark_last_busy() from gpio-arizona - use lock guards in gpio-cadence and gpio-mxc - check the return values of regmap functions in gpio-wcd934x and gpio-tps65912 - use better regmap interfaces in gpio-wcove and gpio-pca953x - remove dummy GPIO chip callbacks from several drivers in cases where the GPIO core can already handle their absence - allow building gpio-palmas as a module Fixes: - use correct bit widths (according to the documentation) in gpio-virtio Device-tree bindings: - convert several of the legacy .txt documents for many different devices to YAML, improving automatic validation - create a "trivial" GPIO DT schema that covers a wide range of simple hardware that share a set of basic GPIO properties - document new HW: Apple MAC SMC GPIO block and adp5589 I/O expander - document a new model for pca95xx - add and/or remove properties in YAML documents for gpio-rockchip, fsl,qoriq-gpio, arm,pl061 and gpio-xilinx Misc: - some minor refactoring in several places, adding/removing forward declarations, moving defines to better places, constify the arguments in some functions, remove duplicate includes, etc. - documentation updates" * tag 'gpio-updates-for-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (202 commits) MIPS: alchemy: gpio: use new GPIO line value setter callbacks for the remaining chips gpiolib: enable CONFIG_GPIOLIB_LEGACY even for !GPIOLIB gpio: virtio: Fix config space reading. gpiolib: make legacy interfaces optional dt-bindings: gpio: rockchip: Allow use of a power-domain gpiolib: of: add forward declaration for struct device_node power: reset: macsmc-reboot: Add driver for rebooting via Apple SMC gpio: Add new gpio-macsmc driver for Apple Macs mfd: Add Apple Silicon System Management Controller soc: apple: rtkit: Make shmem_destroy optional dt-bindings: mfd: Add Apple Mac System Management Controller dt-bindings: power: reboot: Add Apple Mac SMC Reboot Controller dt-bindings: gpio: Add Apple Mac SMC GPIO block gpio: cadence: Remove duplicated include in gpio-cadence.c gpio: tps65219: Add support for TI TPS65214 PMIC gpio: tps65219: Update _IDX & _OFFSET macro prefix gpio: sysfs: Fix an end of loop test in gpiod_unexport() dt-bindings: gpio: Convert qca,ar7100-gpio to DT schema dt-bindings: gpio: Convert maxim,max3191x to DT schema dt-bindings: gpio: fsl,qoriq-gpio: Add missing mpc8xxx compatibles ...

Merge tag 'hardening-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

2025-07-29T00:16:12Z

Pull hardening updates from Kees Cook: - Introduce and start using TRAILING_OVERLAP() helper for fixing embedded flex array instances (Gustavo A. R. Silva) - mux: Convert mux_control_ops to a flex array member in mux_chip (Thorsten Blum) - string: Group str_has_prefix() and strstarts() (Andy Shevchenko) - Remove KCOV instrumentation from __init and __head (Ritesh Harjani, Kees Cook) - Refactor and rename stackleak feature to support Clang - Add KUnit test for seq_buf API - Fix KUnit fortify test under LTO * tag 'hardening-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (22 commits) sched/task_stack: Add missing const qualifier to end_of_stack() kstack_erase: Support Clang stack depth tracking kstack_erase: Add -mgeneral-regs-only to silence Clang warnings init.h: Disable sanitizer coverage for __init and __head kstack_erase: Disable kstack_erase for all of arm compressed boot code x86: Handle KCOV __init vs inline mismatches arm64: Handle KCOV __init vs inline mismatches s390: Handle KCOV __init vs inline mismatches arm: Handle KCOV __init vs inline mismatches mips: Handle KCOV __init vs inline mismatch powerpc/mm/book3s64: Move kfence and debug_pagealloc related calls to __init section configs/hardening: Enable CONFIG_INIT_ON_FREE_DEFAULT_ON configs/hardening: Enable CONFIG_KSTACK_ERASE stackleak: Split KSTACK_ERASE_CFLAGS from GCC_PLUGINS_CFLAGS stackleak: Rename stackleak_track_stack to __sanitizer_cov_stack_depth stackleak: Rename STACKLEAK to KSTACK_ERASE seq_buf: Introduce KUnit tests string: Group str_has_prefix() and strstarts() kunit/fortify: Add back "volatile" for sizeof() constants acpi: nfit: intel: avoid multiple -Wflex-array-member-not-at-end warnings ...

misc: pci_endpoint_test: Add doorbell test case

2025-07-24T21:51:46Z

Add doorbell support with the help of three new registers: PCIE_ENDPOINT_TEST_DB_BAR, PCIE_ENDPOINT_TEST_DB_ADDR, and PCIE_ENDPOINT_TEST_DB_DATA. The testcase works by triggering the doorbell in Endpoint by writing the value from PCI_ENDPOINT_TEST_DB_DATA register to the address provided by PCI_ENDPOINT_TEST_DB_OFFSET register of the BAR indicated by the PCIE_ENDPOINT_TEST_DB_BAR register and waiting for the completion status from the Endpoint. Signed-off-by: Frank Li [mani: removed one spurious change and reworded the commit message] Signed-off-by: Manivannan Sadhasivam Signed-off-by: Bjorn Helgaas Tested-by: Niklas Cassel Link: https://patch.msgid.link/20250710-ep-msi-v21-7-57683fc7fb25@nxp.com