linux/drivers/mmc, branch v6.7

mmc: sdhci-sprd: Fix eMMC init failure after hw reset

2024-01-03T10:24:03Z

Some eMMC devices that do not close the auto clk gate after hw reset will cause eMMC initialization to fail. Let's fix this. Signed-off-by: Wenchao Chen Fixes: ff874dbc4f86 ("mmc: sdhci-sprd: Disable CLK_AUTO when the clock is less than 400K") Reviewed-by: Baolin Wang Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20231204064934.21236-1-wenchao.chen@unisoc.com Signed-off-by: Ulf Hansson

mmc: core: Cancel delayed work before releasing host

2023-12-07T14:14:23Z

On RZ/Five SMARC EVK, where probing of SDHI is deferred due to probe deferral of the vqmmc-supply regulator: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at kernel/time/timer.c:1738 __run_timers.part.0+0x1d0/0x1e8 Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 6.7.0-rc4 #101 Hardware name: Renesas SMARC EVK based on r9a07g043f01 (DT) epc : __run_timers.part.0+0x1d0/0x1e8 ra : __run_timers.part.0+0x134/0x1e8 epc : ffffffff800771a4 ra : ffffffff80077108 sp : ffffffc800003e60 gp : ffffffff814f5028 tp : ffffffff8140c5c0 t0 : ffffffc800000000 t1 : 0000000000000001 t2 : ffffffff81201300 s0 : ffffffc800003f20 s1 : ffffffd8023bc4a0 a0 : 00000000fffee6b0 a1 : 0004010000400000 a2 : ffffffffc0000016 a3 : ffffffff81488640 a4 : ffffffc800003e60 a5 : 0000000000000000 a6 : 0000000004000000 a7 : ffffffc800003e68 s2 : 0000000000000122 s3 : 0000000000200000 s4 : 0000000000000000 s5 : ffffffffffffffff s6 : ffffffff81488678 s7 : ffffffff814886c0 s8 : ffffffff814f49c0 s9 : ffffffff81488640 s10: 0000000000000000 s11: ffffffc800003e60 t3 : 0000000000000240 t4 : 0000000000000a52 t5 : ffffffd8024ae018 t6 : ffffffd8024ae038 status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003 [] __run_timers.part.0+0x1d0/0x1e8 [] run_timer_softirq+0x24/0x4a [] __do_softirq+0xc6/0x1fa [] irq_exit_rcu+0x66/0x84 [] handle_riscv_irq+0x40/0x4e [] call_on_irq_stack+0x1c/0x28 ---[ end trace 0000000000000000 ]--- What happens? renesas_sdhi_probe() { tmio_mmc_host_alloc() mmc_alloc_host() INIT_DELAYED_WORK(&host->detect, mmc_rescan); devm_request_irq(tmio_mmc_irq); /* * After this, the interrupt handler may be invoked at any time * * tmio_mmc_irq() * { * __tmio_mmc_card_detect_irq() * mmc_detect_change() * _mmc_detect_change() * mmc_schedule_delayed_work(&host->detect, delay); * } */ tmio_mmc_host_probe() tmio_mmc_init_ocr() -EPROBE_DEFER tmio_mmc_host_free() mmc_free_host() } When expire_timers() runs later, it warns because the MMC host structure containing the delayed work was freed, and now contains an invalid work function pointer. Fix this by cancelling any pending delayed work before releasing the MMC host structure. Signed-off-by: Geert Uytterhoeven Tested-by: Lad Prabhakar Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/205dc4c91b47e31b64392fe2498c7a449e717b4b.1701689330.git.geert+renesas@glider.be Signed-off-by: Ulf Hansson

mmc: rpmb: fixes pause retune on all RPMB partitions.

2023-12-07T13:54:33Z

When RPMB was converted to a character device, it added support for multiple RPMB partitions (Commit 97548575bef3 ("mmc: block: Convert RPMB to a character device"). One of the changes in this commit was transforming the variable target_part defined in __mmc_blk_ioctl_cmd into a bitmask. This inadvertently regressed the validation check done in mmc_blk_part_switch_pre() and mmc_blk_part_switch_post(), so let's fix it. Fixes: 97548575bef3 ("mmc: block: Convert RPMB to a character device") Signed-off-by: Jorge Ramirez-Ortiz Reviewed-by: Linus Walleij Cc: Link: https://lore.kernel.org/r/20231201153143.1449753-1-jorge@foundries.io Signed-off-by: Ulf Hansson

mmc: meson-mx-sdhc: Fix initialization frozen issue

2023-12-07T13:08:19Z

Commit 4bc31edebde5 ("mmc: core: Set HS clock speed before sending HS CMD13") set HS clock (52MHz) before switching to HS mode. For this freq, FCLK_DIV5 will be selected and div value is 10 (reg value is 9). Then we set rx_clk_phase to 11 or 15 which is out of range and make hardware frozen. After we send command request, no irq will be interrupted and the mmc driver will keep to wait for request finished, even durning rebooting. So let's set it to Phase 90 which should work in most cases. Then let meson_mx_sdhc_execute_tuning() to find the accurate value for data transfer. If this doesn't work, maybe need to define a factor in dts. Fixes: e4bf1b0970ef ("mmc: host: meson-mx-sdhc: new driver for the Amlogic Meson SDHC host") Signed-off-by: Ziyang Huang Tested-by: Anand Moon Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/TYZPR01MB5556A3E71554A2EC08597EA4C9CDA@TYZPR01MB5556.apcprd01.prod.exchangelabs.com Signed-off-by: Ulf Hansson

mmc: sdhci-sprd: Fix vqmmc not shutting down after the card was pulled

2023-11-23T17:04:17Z

With cat regulator_summary, we found that vqmmc was not shutting down after the card was pulled. cat /sys/kernel/debug/regulator/regulator_summary 1.before fix 1)Insert SD card vddsdio 1 1 0 unknown 3500mV 0mA 1200mV 3750mV 71100000.mmc-vqmmc 1 0mA 3500mV 3600mV 2)Pull out the SD card vddsdio 1 1 0 unknown 3500mV 0mA 1200mV 3750mV 71100000.mmc-vqmmc 1 0mA 3500mV 3600mV 2.after fix 1)Insert SD cardt vddsdio 1 1 0 unknown 3500mV 0mA 1200mV 3750mV 71100000.mmc-vqmmc 1 0mA 3500mV 3600mV 2)Pull out the SD card vddsdio 0 1 0 unknown 3500mV 0mA 1200mV 3750mV 71100000.mmc-vqmmc 0 0mA 3500mV 3600mV Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller") Signed-off-by: Wenchao Chen Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20231115083406.7368-1-wenchao.chen@unisoc.com Signed-off-by: Ulf Hansson

mmc: sdhci-pci-gli: Disable LPM during initialization

2023-11-23T17:01:12Z

To address IO performance commit f9e5b33934ce ("mmc: host: Improve I/O read/write performance for GL9763E") limited LPM negotiation to runtime suspend state. The problem is that it only flips the switch in the runtime PM resume/suspend logic. Disable LPM negotiation in gl9763e_add_host. This helps in two ways: 1. It was found that the LPM switch stays in the same position after warm reboot. Having it set in init helps with consistency. 2. Disabling LPM during the first runtime resume leaves us susceptible to the performance issue in the time window between boot and the first runtime suspend. Fixes: f9e5b33934ce ("mmc: host: Improve I/O read/write performance for GL9763E") Cc: stable@vger.kernel.org Signed-off-by: Kornel Dulęba Reviewed-by: Sven van Ashbrook Acked-by: Adrian Hunter Link: https://lore.kernel.org/r/20231114115516.1585361-1-korneld@chromium.org Signed-off-by: Ulf Hansson

mmc: cqhci: Fix task clearing in CQE error recovery

2023-11-14T16:15:08Z

If a task completion notification (TCN) is received when there is no outstanding task, the cqhci driver issues a "spurious TCN" warning. This was observed to happen right after CQE error recovery. When an error interrupt is received the driver runs recovery logic. It halts the controller, clears all pending tasks, and then re-enables it. On some platforms, like Intel Jasper Lake, a stale task completion event was observed, regardless of the CQHCI_CLEAR_ALL_TASKS bit being set. This results in either: a) Spurious TC completion event for an empty slot. b) Corrupted data being passed up the stack, as a result of premature completion for a newly added task. Rather than add a quirk for affected controllers, ensure tasks are cleared by toggling CQHCI_ENABLE, which would happen anyway if cqhci_clear_all_tasks() timed out. This is simpler and should be safe and effective for all controllers. Fixes: a4080225f51d ("mmc: cqhci: support for command queue enabled host") Cc: stable@vger.kernel.org Reported-by: Kornel Dulęba Tested-by: Kornel Dulęba Co-developed-by: Kornel Dulęba Signed-off-by: Kornel Dulęba Signed-off-by: Adrian Hunter Reviewed-by: Avri Altman Link: https://lore.kernel.org/r/20231103084720.6886-7-adrian.hunter@intel.com Signed-off-by: Ulf Hansson

mmc: cqhci: Warn of halt or task clear failure

2023-11-14T16:15:07Z

A correctly operating controller should successfully halt and clear tasks. Failure may result in errors elsewhere, so promote messages from debug to warnings. Fixes: a4080225f51d ("mmc: cqhci: support for command queue enabled host") Cc: stable@vger.kernel.org Signed-off-by: Adrian Hunter Reviewed-by: Avri Altman Reviewed-by: Avri Altman Link: https://lore.kernel.org/r/20231103084720.6886-6-adrian.hunter@intel.com Signed-off-by: Ulf Hansson

mmc: block: Retry commands in CQE error recovery

2023-11-14T16:15:07Z

It is important that MMC_CMDQ_TASK_MGMT command to discard the queue is successful because otherwise a subsequent reset might fail to flush the cache first. Retry it and the previous STOP command. Fixes: 72a5af554df8 ("mmc: core: Add support for handling CQE requests") Cc: stable@vger.kernel.org Signed-off-by: Adrian Hunter Reviewed-by: Avri Altman Link: https://lore.kernel.org/r/20231103084720.6886-5-adrian.hunter@intel.com Signed-off-by: Ulf Hansson

mmc: block: Be sure to wait while busy in CQE error recovery

2023-11-14T16:15:07Z

STOP command does not guarantee to wait while busy, but subsequent command MMC_CMDQ_TASK_MGMT to discard the queue will fail if the card is busy, so be sure to wait by employing mmc_poll_for_busy(). Fixes: 72a5af554df8 ("mmc: core: Add support for handling CQE requests") Cc: stable@vger.kernel.org Signed-off-by: Adrian Hunter Reviewed-by: Avri Altman Reviewed-by: Christian Loehle Link: https://lore.kernel.org/r/20231103084720.6886-4-adrian.hunter@intel.com Signed-off-by: Ulf Hansson