linux/drivers/mtd, branch v3.18

Merge tag 'for-linus-20141102' of git://git.infradead.org/linux-mtd

2014-11-02T22:45:52Z

Pull MTD fixes from Brian Norris: "Three main MTD fixes for 3.18: - A regression from 3.16 which was noticed in 3.17. With the restructuring of the m25p80.c driver and the SPI NOR library framework, we omitted proper listing of the SPI device IDs. This means m25p80.c wouldn't auto-load (modprobe) properly when built as a module. For now, we duplicate the device IDs into both modules. - The OMAP / ELM modules were depending on an implicit link ordering. Use deferred probing so that the new link order (in 3.18-rc) can still allow for successful probing. - Fix suspend/resume support for LH28F640BF NOR flash" * tag 'for-linus-20141102' of git://git.infradead.org/linux-mtd: mtd: cfi_cmdset_0001.c: fix resume for LH28F640BF chips mtd: omap: fix mtd devices not showing up mtd: m25p80,spi-nor: Fix module aliases for m25p80 mtd: spi-nor: make spi_nor_scan() take a chip type name, not spi_device_id mtd: m25p80: get rid of spi_get_device_id

mtd: cfi_cmdset_0001.c: fix resume for LH28F640BF chips

2014-10-30T01:50:52Z

After '#echo mem > /sys/power/state' some devices can not be properly resumed because apparently the MTD Partition Configuration Register has been reset to default thus the rootfs cannot be mounted cleanly on resume. An example of this can be found in the SA-1100 Developer's Manual at 9.5.3.3 where the second step of the Sleep Shutdown Sequence is described: "An internal reset is applied to the SA-1100. All units are reset...". As workaround we refresh the PCR value as done initially on chip setup. This behavior and the fix are confirmed by our tests done on 2 different Zaurus collie units with kernel 3.17. Fixes: 812c5fa82bae: ("mtd: cfi_cmdset_0001.c: add support for Sharp LH28F640BF NOR") Signed-off-by: Dmitry Eremin-Solenikov Signed-off-by: Andrea Adami Cc: # 3.16+ Signed-off-by: Brian Norris

mtd: omap: fix mtd devices not showing up

2014-10-30T01:41:54Z

Since commit 6d178ef2fd5e ("mtd: nand: Move ELM driver and rename as omap_elm"), I don't have any mtd devices present on my am335x. This changes the link order of the omap_elm and omap2 objects, causing them to probe in the wrong order. To fix this, make elm_config defer probing until the omap_elm driver is actually loaded. Signed-off-by: Frans Klaver Acked-by: Roger Quadros Signed-off-by: Brian Norris

mtd: m25p80,spi-nor: Fix module aliases for m25p80

2014-10-21T20:46:03Z

m25p80's device ID table is now spi_nor_ids, defined in spi-nor. The MODULE_DEVICE_TABLE() macro doesn't work with extern definitions, but its use was also removed at the same time. Now if m25p80 is built as a module it doesn't get the necessary aliases to be loaded automatically. A clean solution to this will involve defining the list of device IDs in spi-nor.h and removing struct spi_device_id from the spi-nor API, but this is quite a large change. As a quick fix suitable for stable, copy the device IDs back into m25p80. Fixes: 03e296f613af ("mtd: m25p80: use the SPI nor framework") Cc: # 3.16.x: 32f1b7c8352f: mtd: move support for struct flash_platform_data into m25p80 Cc: # 3.16.x: 90e55b3812a1: mtd: m25p80: get rid of spi_get_device_id Cc: # 3.16.x: 70f3ce0510af: mtd: spi-nor: make spi_nor_scan() take a chip type name, not spi_device_id Cc: # 3.16.x Signed-off-by: Ben Hutchings Signed-off-by: Brian Norris

Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma

2014-10-19T01:11:04Z

Pull slave-dmaengine updates from Vinod Koul: "For dmaengine contributions we have: - designware cleanup by Andy - my series moving device_control users to dmanegine_xxx APIs for later removal of device_control API - minor fixes spread over drivers mainly mv_xor, pl330, mmp, imx-sdma etc" * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (60 commits) serial: atmel: add missing dmaengine header dmaengine: remove FSLDMA_EXTERNAL_START dmaengine: freescale: remove FSLDMA_EXTERNAL_START control method carma-fpga: move to fsl_dma_external_start() carma-fpga: use dmaengine_xxx() API dmaengine: freescale: add and export fsl_dma_external_start() dmaengine: add dmaengine_prep_dma_sg() helper video: mx3fb: use dmaengine_terminate_all() API serial: sh-sci: use dmaengine_terminate_all() API net: ks8842: use dmaengine_terminate_all() API mtd: sh_flctl: use dmaengine_terminate_all() API mtd: fsmc_nand: use dmaengine_terminate_all() API V4L2: mx3_camer: use dmaengine_pause() API dmaengine: coh901318: use dmaengine_terminate_all() API pata_arasan_cf: use dmaengine_terminate_all() API dmaengine: edma: check for echan->edesc => NULL in edma_dma_pause() dmaengine: dw: export probe()/remove() and Co to users dmaengine: dw: enable and disable controller when needed dmaengine: dw: always export dw_dma_{en,dis}able dmaengine: dw: introduce dw_dma_on() helper ...

Merge branch 'for-3.18/drivers' of git://git.kernel.dk/linux-block

2014-10-18T19:12:45Z

Pull block layer driver update from Jens Axboe: "This is the block driver pull request for 3.18. Not a lot in there this round, and nothing earth shattering. - A round of drbd fixes from the linbit team, and an improvement in asender performance. - Removal of deprecated (and unused) IRQF_DISABLED flag in rsxx and hd from Michael Opdenacker. - Disable entropy collection from flash devices by default, from Mike Snitzer. - A small collection of xen blkfront/back fixes from Roger Pau Monné and Vitaly Kuznetsov" * 'for-3.18/drivers' of git://git.kernel.dk/linux-block: block: disable entropy contributions for nonrot devices xen, blkfront: factor out flush-related checks from do_blkif_request() xen-blkback: fix leak on grant map error path xen/blkback: unmap all persistent grants when frontend gets disconnected rsxx: Remove deprecated IRQF_DISABLED block: hd: remove deprecated IRQF_DISABLED drbd: use RB_DECLARE_CALLBACKS() to define augment callbacks drbd: compute the end before rb_insert_augmented() drbd: Add missing newline in resync progress display in /proc/drbd drbd: reduce lock contention in drbd_worker drbd: Improve asender performance drbd: Get rid of the WORK_PENDING macro drbd: Get rid of the __no_warn and __cond_lock macros drbd: Avoid inconsistent locking warning drbd: Remove superfluous newline from "resync_extents" debugfs entry. drbd: Use consistent names for all the bi_end_io callbacks drbd: Use better variable names

Merge tag 'for-linus-20141015' of git://git.infradead.org/linux-mtd

2014-10-18T18:48:03Z

Pull MTD update from Brian Norris: "Sorry for delaying this a bit later than usual. There's one mild regression from 3.16 that was noticed during the 3.17 cycle, and I meant to send a fix for it along with this pull request. I'll probably try to queue it up for a later pull request once I've had a better look at it, hopefully by -rc2 at the latest. Summary for this pull: NAND - Cleanup for Denali driver - Atmel: add support for new page sizes - Atmel: fix up 'raw' mode support - Atmel: miscellaneous cleanups - New timing mode helpers for non-ONFI NAND - OMAP: allow driver to be (properly) built as a module - bcm47xx: RESET support and other cleanups SPI NOR - Miscellaneous cleanups, to prepare framework for wider use (some further work still pending) - Compile-time configuration to select 4K vs. 64K support for flash that support both (necessary for using UBIFS on some SPI NOR) A few scattered code quality fixes, detected by Coverity See the changesets for more" * tag 'for-linus-20141015' of git://git.infradead.org/linux-mtd: (59 commits) mtd: nand: omap: Correct CONFIG_MTD_NAND_OMAP_BCH help message mtd: nand: Force omap_elm to be built as a module if omap2_nand is a module mtd: move support for struct flash_platform_data into m25p80 mtd: spi-nor: add Kconfig option to disable 4K sectors mtd: nand: Move ELM driver and rename as omap_elm nand: omap2: Replace pr_err with dev_err nand: omap2: Remove horrible ifdefs to fix module probe mtd: nand: add Hynix's H27UCG8T2ATR-BC to nand_ids table mtd: nand: support ONFI timing mode retrieval for non-ONFI NANDs mtd: physmap_of: Add non-obsolete map_rom probe mtd: physmap_of: Fix ROM support via OF MAINTAINERS: add l2-mtd.git, 'next' tree for MTD mtd: denali: fix indents and other trivial things mtd: denali: remove unnecessary parentheses mtd: denali: remove another set-but-unused variable mtd: denali: fix include guard and license block of denali.h mtd: nand: don't break long print messages mtd: bcm47xxnflash: replace some magic numbers mtd: bcm47xxnflash: NAND_CMD_RESET support mtd: bcm47xxnflash: add cmd_ctrl handler ...

mtd: spi-nor: make spi_nor_scan() take a chip type name, not spi_device_id

2014-10-17T16:29:21Z

Drivers currently call spi_nor_match_id() and then spi_nor_scan(). This adds a dependency on struct spi_device_id which we want to avoid. Make spi_nor_scan() do it for them. Signed-off-by: Ben Hutchings Signed-off-by: Rafał Miłecki Signed-off-by: Brian Norris

mtd: m25p80: get rid of spi_get_device_id

2014-10-17T16:29:21Z

This simplifies the way we use spi_nor framework and will allow us to drop spi_nor_match_id. Signed-off-by: Rafał Miłecki Signed-off-by: Brian Norris

mtd: sh_flctl: use dmaengine_terminate_all() API

2014-10-15T16:00:59Z

The drivers should use dmaengine_terminate_all() API instead of accessing the device_control which will be deprecated soon Acked-by: Laurent Pinchart Signed-off-by: Vinod Koul